Posted: Tue Jan 11, 2011 10:07 Post subject: wzr-hp-g300nh @ 31 dBm
ok so i dont know if it will stick but it is possible to get 31 dBm out of your wzr-hp-g300nh what i did was i set up as a wds ap then switched it to client and it has stuck i dont know why this has happened like this.
Joined: 06 Mar 2008 Posts: 92 Location: South East Asia
Posted: Tue Jan 11, 2011 12:24 Post subject: Re: wzr-hp-g300nh @ 31 dBm
mut3d wrote:
ok so i dont know if it will stick but it is possible to get 31 dBm out of your wzr-hp-g300nh what i did was i set up as a wds ap then switched it to client and it has stuck i dont know why this has happened like this.
yes... that is the trick. Done that on my whr-hp-g300n as well... now at 28dBm :wink:
Joined: 06 Feb 2010 Posts: 7401 Location: Little Rock
Posted: Thu Jan 13, 2011 12:36 Post subject:
AirFart wrote:
i use 15962 build. Still manage to get 28dBm:wink:
Wifi set to : Mixed mode (B/G/N)
Country code : United States
Channel : 6
Antenna gain : 0
Tx Power : 28dBm
TX antenna link : 1+2+3
Rx antenna link : 1+2+3
Security : WPA personal
Firewall : disabled
Not to discourage you here but, I keep seeing in threads of you announcing this dBm rate, but if you read more carefully, this is about the WZR-HP-G300NH not the WHR-HP-300N which from your sig is what you have here, these units have totally different hardware. _________________ Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ