Dir-600 Rev Bx - newest DD-WRT Build download?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware
Goto page 1, 2  Next
Author Message
michael12345
DD-WRT Novice


Joined: 13 Jan 2011
Posts: 32

PostPosted: Thu Jan 13, 2011 11:55    Post subject: Dir-600 Rev Bx - newest DD-WRT Build download? Reply with quote
Hello together,

I already searched the forum but I dont find anything related to my issue:

Where can I download the lasted working firmware (maybe R15xx or R16xxx) for flashing a new dir-600 device?

Of course, I know the router databse, but it only contains 13x and 14x releases Sad

greetings!
Sponsor
SecurityFreak
DD-WRT User


Joined: 22 Jun 2010
Posts: 87

PostPosted: Thu Jan 13, 2011 12:58    Post subject: Re: Dir-600 Rev Bx - newest DD-WRT Build download? Reply with quote
Example -> ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/12-18-10-r15940/

Navigate around there and you can choose between 15778 ,15940 or 15962 they all work.
Don t expect wonders.

Before flashing read the wiki about recovering and flashing of the unit.
michael12345
DD-WRT Novice


Joined: 13 Jan 2011
Posts: 32

PostPosted: Thu Jan 13, 2011 13:57    Post subject: Reply with quote
thank you very much Smile

i will try this one: ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/12-24-10-r15962/dlink-dir600b/

I have already read and tried flashing the unit, but for some reasons the R14xx runs in errors... therefore I wanted to try a newer version Smile
koike
DD-WRT Novice


Joined: 09 Dec 2010
Posts: 2

PostPosted: Sat Jan 15, 2011 16:07    Post subject: Reply with quote
I have installed the version R15962 on my brand new DIR-600 Rev. Bx and everything is working OK.
The rev. Bx has the same 32Mb Ram and 4Mb flash as others revisions.
The only problem is the power led that is orange instead of Green. (This probably can be corrected by gpio
michael12345
DD-WRT Novice


Joined: 13 Jan 2011
Posts: 32

PostPosted: Mon Jan 17, 2011 8:12    Post subject: Reply with quote
koike wrote:
I have installed the version R15962 on my brand new DIR-600 Rev. Bx and everything is working OK.
The rev. Bx has the same 32Mb Ram and 4Mb flash as others revisions.
The only problem is the power led that is orange instead of Green. (This probably can be corrected by gpio


Thats all correct, but loopback for your port forwardings wont work anymore with this release.
dark_lord86
DD-WRT Novice


Joined: 30 Dec 2011
Posts: 2

PostPosted: Fri Dec 30, 2011 13:34    Post subject: Reply with quote
Hello
I have the DIR-600 rev Bx router and i have problem flashing it with dd-wrt firmware. I try with R15962 and r18024 version in web interface and bootloader, no luck.
Someone can help?
Thank you!
koike
DD-WRT Novice


Joined: 09 Dec 2010
Posts: 2

PostPosted: Sat Dec 31, 2011 19:49    Post subject: Reply with quote
dark_lord86 wrote:
Hello
I have the DIR-600 rev Bx router and i have problem flashing it with dd-wrt firmware. I try with R15962 and r18024 version in web interface and bootloader, no luck.
Someone can help?
Thank you!

I have tested the R18024 and the LAN ports are disabled.
Im using now r18007, but the sshd daemon is missing, so i can manage the router only by GUI or Telnet.
blackiceman
DD-WRT Novice


Joined: 02 Jan 2012
Posts: 1

PostPosted: Mon Jan 02, 2012 5:50    Post subject: Reply with quote
can anyone tell me which FIRMWARE is most stable in my DLINK-600 RevB2E, that work in LAN, WIFI and PPTP VPN
ucup
DD-WRT Novice


Joined: 29 Jan 2012
Posts: 4

PostPosted: Sun Jan 29, 2012 14:49    Post subject: Reply with quote
Dear all,
I have just successfully flashed the D-LINK DIR-600 Rev.B2 with r18024, and LAN ports are not working. Is there any workaround to enable the LAN ports? I would like to try flashing to previous version (r18007?) but not sure it is safe to do via WiFi, the only way I communicate with my D-LINK currently.
dark_lord86
DD-WRT Novice


Joined: 30 Dec 2011
Posts: 2

PostPosted: Mon Jan 30, 2012 12:03    Post subject: Reply with quote
you can put router in "boot" mode and flash the original firmware, then the build you want.
scott1981
DD-WRT User


Joined: 29 Apr 2009
Posts: 106

PostPosted: Mon Jan 30, 2012 13:42    Post subject: Re: Dir-600 Rev Bx - newest DD-WRT Build download? Reply with quote
SecurityFreak wrote:
Example -> ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/12-18-10-r15940/

Navigate around there and you can choose between 15778 ,15940 or 15962 they all work.
Don t expect wonders.

Before flashing read the wiki about recovering and flashing of the unit.


I tried 15962 on a used DIR 600 I purchased recently and noticed that wireless transfer speeds are still way too low. What are the wireless settings are you using to get the best transfer speeds? I am still unable to get anything higher than 4 mbit per second (around 500kB/sec). I am sure I must be missing something in the wireless settings.

Thanks in advance.
ucup
DD-WRT Novice


Joined: 29 Jan 2012
Posts: 4

PostPosted: Mon Jan 30, 2012 14:56    Post subject: Reply with quote
@dark_lord86, thank you. I will try it, hopefully the LAN ports work in "boot" mode.
Crnogorac
DD-WRT Novice


Joined: 30 Jan 2012
Posts: 2

PostPosted: Mon Jan 30, 2012 21:53    Post subject: Reply with quote
I bought a D-Link 600 B5E F / W Ver. 2.10 I read somewhere that it is not compatible router with DD-WRT !?
Is it compatible version of DD-WRT released ?
And whether it will be?


Sorry for my bad English Wink
iddeenkhai
DD-WRT Novice


Joined: 30 Dec 2009
Posts: 18

PostPosted: Mon Feb 20, 2012 12:57    Post subject: Reply with quote
Crnogorac wrote:
I bought a D-Link 600 B5E F / W Ver. 2.10 I read somewhere that it is not compatible router with DD-WRT !?
Is it compatible version of DD-WRT released ?
And whether it will be?


Sorry for my bad English Wink


Revision above B2 is currently not supported. They use a different Ralink chipset which is again, not supported. Support for chipset seems to be hard to come by. Might be a long wait , if it ever happens. My advice? Get another router.
Captain Rage
DD-WRT Novice


Joined: 15 Mar 2012
Posts: 4

PostPosted: Thu Mar 15, 2012 13:11    Post subject: Reply with quote
Has anyone tried the 18687 build (ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2012/03-08-12-r18687/files/dlink-dir600b/) on the Dir-600 Rev Bx? I'm currently using the old 14896 build, but there the port forwarding is broken, which is a major nuisance. I really hope a new stable version will be out for the Dir-600 Rev Bx in a not too distant future, which has all basic features working.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Ralink SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum