TP-Link WA701ND v1 support

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3, 4  Next
Author Message
digitalencryption
DD-WRT Novice


Joined: 30 Jan 2011
Posts: 3

PostPosted: Sun Jan 30, 2011 17:42    Post subject: TP-Link WA701ND v1 support Reply with quote
Is this AP supported?

CPU: Atheros AR7240
Wireless: Atheros AR9285
RAM: Hynix HY5DU561622FTP-5 (32MB)
Flash: SPANSION S25FL03PFI(4MB
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Sun Jan 30, 2011 22:30    Post subject: Reply with quote
do
http://dd-wrt.com/site/support/router-detection

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
digitalencryption
DD-WRT Novice


Joined: 30 Jan 2011
Posts: 3

PostPosted: Sun Mar 13, 2011 14:32    Post subject: Reply with quote
Any of you smart programmers make any progress on WA701nd support? Smile
stocastic81
DD-WRT Novice


Joined: 03 Apr 2011
Posts: 1

PostPosted: Sun Apr 03, 2011 13:48    Post subject: Reply with quote
Any progress on WA701nd support?
Boomberman
DD-WRT Novice


Joined: 06 Jun 2011
Posts: 1

PostPosted: Fri Jun 10, 2011 11:51    Post subject: Reply with quote
So what about dd-wrt for WA701ND ??
overkillthemighty
DD-WRT Novice


Joined: 08 Dec 2011
Posts: 3

PostPosted: Thu Dec 08, 2011 7:59    Post subject: Reply with quote
Search TL-WA701ND for the info on the device. It meets the basic requirements for DD-WRT, and even has the same Flash, Ram, and Chipset as the TL-WR741ND (the difference is the 4 extra ports). It shouldn't be too difficult to get this done, it is just a matter of someone with the knowledge to have time/care.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Thu Dec 08, 2011 14:03    Post subject: Reply with quote
Sash wrote:
do
http://dd-wrt.com/site/support/router-detection
Exclamation Exclamation Exclamation Exclamation
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Vaako
DD-WRT User


Joined: 10 Jun 2009
Posts: 362

PostPosted: Sun Dec 11, 2011 21:05    Post subject: Reply with quote
Of course the TL-WA701ND can be supported by DD-WRT just open a ticket http://www.dd-wrt.com/dd-wrtv2/bugtracker/login_page.php and ask if they will add this Acess Point to thiere to do list.

If this device wil be supported it would be good to make a cheap Bridge setup with two of them.

_________________
Regards,
Vaako

1x Netgear R7800 Nighthawk - firmware not decided yet !!!!
1x Netgear R7000 Nighthawk r36410
1x Ubiquiti RouterStation Pro DD-WRT r23204 std (12/24/13)
1x Asus RT-N16 SVN revision 20675 NEWD-2 K2.6
1x Linksys E4200 v3.0 r34777 mega (01/31/18 )
1x Buffalo WZR-HP-G300NH B0 B0 Gargoyle FW
1x Linksys WRT600N v1.1 (Bricked)
1x Linksys WRT54GL v1.1 (DD-WRT 26446)
1x Linksys WRT54GS v2.2 (DD-WRT 26446)
1x Linksys RVS4000 (stock fw)
3x D-Link DWL-7100AP (openWRT)
2x TP-Link TL-WA801ND (Bridge mode) 100mW TX-Power
Asus WL-520GU SVN 16403M NEWD-2 Eko std-nokaid
4x Fonera with Gargoyle FW
kimmo88
DD-WRT Novice


Joined: 28 Feb 2012
Posts: 8

PostPosted: Tue Feb 28, 2012 18:21    Post subject: Reply with quote
tp-link wa701nd v1.2

hoping this AP will be supported soon!
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Sun Apr 22, 2012 9:51    Post subject: Reply with quote
no homework from u and there will never ba a port!
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
seron
DD-WRT Novice


Joined: 18 May 2012
Posts: 1

PostPosted: Fri May 18, 2012 14:52    Post subject: Reply with quote
What do you mean by this? Why will it not be supported?

Sash wrote:
do
http://dd-wrt.com/site/support/router-detection

The only thing I see missing in this thread is the FCC-ID. It is TE7WA701ND. What else is missing?
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Tue Jun 05, 2012 11:09    Post subject: Reply with quote
right and i dont see a serial log and orig file for header checking, etc
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
digitalencryption
DD-WRT Novice


Joined: 30 Jan 2011
Posts: 3

PostPosted: Sun Jun 24, 2012 13:12    Post subject: Reply with quote
Code:

U-Boot 1.1.4 (Dec 16 2009 - 17:41:17)

AP91 (ar7240) U-boot
DRAM:
sri
#### TAP VALUE 1 = 9, 2 = 9
32 MB
id read 0x100000ff
flash size 4194304, sector count = 64
Flash:  4 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7014
eth0: 00:03:7f:09:0b:ad
eth0 up
No valid address in Flash. Using fixed address
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
ATHRS26: resetting s26
ATHRS26: s26 reset done
eth1 up
eth0, eth1
Autobooting in 1 seconds
## Booting image at 9f020000 ...
   Uncompressing Kernel Image ... OK

Starting kernel ...

Booting AR7240(Python)...
Linux version 2.6.15--LSDK-7.3.0.300 gcc version 3.4.4 #22 Thu Mar 18 20:12:48 CST 2010
flash_size passed from bootloader = 4
CPU revision is: 00019374
Determined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
User-defined physical RAM map:
 memory: 02000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs init=/sbin/init mtdparts=ar7100-nor0:128k(u-boot),1024k(kernel),2816k(rootfs),64k(config),64k(art) mem=32M
Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
PID hash table entries: 256 (order: 8, 4096 bytes)
Using 175.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 30548k/32768k available (1368k kernel code, 2204k reserved, 291k data, 128k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction...  available.
NET: Registered protocol family 16
Reset button pressed.
Returning IRQ 48
AR7240 GPIOC major 0
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
Initializing Cryptographic API
io scheduler noop registered
io scheduler deadline registered
Serial: 8250/16550 driver $Revision: #1 $ 1 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
RAMDISK driver initialized: 1 RAM disks of 8192K size 1024 blocksize
PPP generic driver version 2.4.2
NET: Registered protocol family 24
cmdlinepart partition parsing not available
Searching for RedBoot partition table
5 RedBoot partitions found on MTD device ar7240-nor0
Creating 5 MTD partitions on "ar7240-nor0":
0x00000000-0x00020000 : "boot"
0x00020000-0x00120000 : "kernel"
0x00120000-0x003e0000 : "rootfs"
0x003e0000-0x003f0000 : "config"
0x003f0000-0x00400000 : "art"
->Oops: flash id 0x10215 .
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 128k freed
init started:  BusyBox v1.01 (2010.02.01-08:20+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
ip_conntrack version 2.4 (256 buckets, 5120 max) - 244 bytes per conntrack
insmod: cannot open module `/lib/modules/2.6.15/kernel/ip_nat.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_MASQUERADE.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_conntrack.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_iprange.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_mac.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_string.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/iptable_nat.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_time.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_TRIGGER.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ip_conntrack_pptp.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_TCPMSS.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_multiurl.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ip_conntrack_h323.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ipt_MARK.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/sch_htb.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/sch_prio.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/sch_sfq.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/cls_basic.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/cls_fw.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/ts_kmp.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/flashid.ko': No such file or directory
insmod: cannot open module `/lib/modules/2.6.15/kernel/harmony.ko': No such file or directory
Now flash open!
Now flash open!
sys_mode=3 mac:8106c000 ag7240_macs[0]:00000000 ag7240_macs[1]:8106c000
2
sys_mode=3 mac:80308000 ag7240_macs[0]:80308000 ag7240_macs[1]:8106c000
1
sys_mode 3 PHY4 auto-negotiation enable
Attention: PHY4  Class A setting in debug 5 register which is not described in DS
phy_setup ethUnit:0 phyUnit:4
Port 4, Neg Success

 (none) mips #22 Thu Mar 18 20:12:48 CST 2010 (none)
(none) login: ATHRS26: resetting s26
ATHRS26: s26 reset done
sys_mode 3 PHY0 auto-negotiation enable
Attention: PHY 0 Class A setting in debug 5 register which is not described in DS
sys_mode 3 PHY1 auto-negotiation enable
Attention: PHY 1 Class A setting in debug 5 register which is not described in DS
sys_mode 3 PHY2 auto-negotiation enable
Attention: PHY 2 Class A setting in debug 5 register which is not described in DS
sys_mode 3 PHY3 auto-negotiation enable
Attention: PHY 3 Class A setting in debug 5 register which is not described in DS
phy_setup ethUnit:1 phyUnit:0
phy_setup ethUnit:1 phyUnit:1
phy_setup ethUnit:1 phyUnit:2
phy_setup ethUnit:1 phyUnit:3
Port 0, Neg Success
Port 1, Neg Success
Port 2, Neg Success
Port 3, Neg Success
device eth0 entered promiscuous mode
phy_setup ethUnit:1 phyUnit:0
phy_setup ethUnit:1 phyUnit:1
phy_setup ethUnit:1 phyUnit:2
phy_setup ethUnit:1 phyUnit:3
Port 0, Neg Success
Port 1, Neg Success
Port 2, Neg Success
Port 3, Neg Success
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.17.1 (AR5416, DEBUG, REGOPS_FUNC, WRITE_EEPROM, 11D)
wlan: 0.8.4.2 (Atheros/multi-bss)
ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
++++ phy_up is 1, fdx is 1, speed is 1
AG7240: enet unit:1 phy:0 is up...Mii 100Mbps full duplex
AG7240: enet unit 1 phy 0 mode 0x4c04
br0: port 1(eth0) entering learning state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
ath_pci: 0.9.4.5 (Atheros/multi-bss)
wifi0: Atheros 9285: mem=0x10000000, irq=48 hw_base=0xb0000000
wlan_me: Version 0.1
Copyright (c) 2008 Atheros Communications, Inc. All Rights Reserved
wlan: mac acl policy registered
maxrate = 150000

OPERMODE:1****
device ath1 entered promiscuous mode
br0: port 2(ath1) entering learning state
br0: topology change detected, propagating
br0: port 2(ath1) entering forwarding state
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7647

PostPosted: Tue Jun 26, 2012 14:37    Post subject: Reply with quote
Test file of r19342 while waiting for Brainslayers official support.

Use WA801NDv1 files for updates until the router gets its own build.

Use WA701N v1 revert files from the sticky Revert Files thread if you want to revert to stock firmware.

Sash wants the dmesg from this build for a possibly quicker dd-wrt official support.

_________________
Kernel panic: Aiee, killing interrupt handler!
dan1234uk
DD-WRT Novice


Joined: 24 Aug 2012
Posts: 1

PostPosted: Sat Aug 25, 2012 19:04    Post subject: Reply with quote
Hey it works pal....flashed my WA701ND with latest WA801ND DD-WRT build....but i notice the WA801ND has a different antenna setup than my WA701ND so it's not ideal.

I'm hoping for an official WA701ND DD-WRT build so i'll help in any way i can...so what's a dmesg pal?
Goto page 1, 2, 3, 4  Next Display posts from previous:    Page 1 of 4
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum