Posted: Wed Aug 04, 2010 9:55 Post subject: Optware mount problem on Asus WL-520GU
I have installed optware using the "optware the right way" script and upon each reboot the partitions in my external are not automounted except for the first where optware is installed. when i run "service" it doesnt exist. if after reboot i switch off my external and switch it back on they are mounted automatically and services work, but both the partition for optware and the one for data are mounted as /opt.
my firmware is DD-WRT v24-sp2 (07/28/10) mini-usb-ftp - build 14853M NEWD-2 Eko
here is mount on reboot:
Code:
root@asus:~# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
devpts on /proc/bus/usb type usbfs (rw)
/dev/discs/disc0/part1 on /opt type ext3 (rw)
mount after drive reset
Code:
root@asus:~# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
ramfs on /tmp type ramfs (rw)
devpts on /proc/bus/usb type usbfs (rw)
/dev/discs/disc0/part1 on /opt type ext3 (rw)
/dev/discs/disc0/part3 on /opt type ext3 (rw)
The brainslayer build suggested by Masterman had the same problems for me, this one ended up working perfectly: DD-WRT v24-sp2 (07/28/10) mini-usb-ftp - build 14853M NEWD Eko
I signed up just to post this and I hope the right people are reading it. I can´t fix that myself, but signing up for a Bug report should is the least I can do.
I just want to bring this Topic back up because I had the exact same problem here today on my Asus RT-N16 with the Builds:
dd-wrt.v24-18777_NEWD-2_K2.6_mega.bin
dd-wrt.v24-18024_NEWD-2_K2.6_mega.bin
I went back to
dd-wrt.v24-14929_NEWD-2_K2.6_big.bin
and the Problem went away.
Maybe I should mention that before and after each flash I did the 30-30-30 Reset. To me it seems like that double Mounting bug is back again in the newer builds.