Joined: 05 May 2008 Posts: 62 Location: Near Area 51, Nevada
Posted: Sat Feb 12, 2011 0:03 Post subject: WRT54GS v2.0 (CGN3) GPIO Points?
I'm trying to piece together an MMC card mod on this, and I'm having no luck. Can anyone tell me where the correct GPIO points are? Using DD-WRT 14896 mega. _________________ Perfect Cantenna: Use the big spagetti sauce cans, 3-1/4" diameter. Make the element 31mm long, and place the element exactly 2-1/2" from the bottom of the can. The dimentions are critical, and these are perfect.
Joined: 05 May 2008 Posts: 62 Location: Near Area 51, Nevada
Posted: Wed Feb 16, 2011 7:48 Post subject: I figured it out myself
Since nobody had an answer, here it is. I used the tutorial for the WRT54G-TM, but I noticed that this one used the amber led to indicate a connection. I located and used gpio 5 for DI, and gpio2 for CLK, instead of 3. I manually set those in dd-wrt, and it worked. _________________ Perfect Cantenna: Use the big spagetti sauce cans, 3-1/4" diameter. Make the element 31mm long, and place the element exactly 2-1/2" from the bottom of the can. The dimentions are critical, and these are perfect.
Posted: Sun Apr 15, 2012 8:40 Post subject: Re: I figured it out myself
TinCanWaveguide wrote:
Since nobody had an answer, here it is. I used the tutorial for the WRT54G-TM, but I noticed that this one used the amber led to indicate a connection. I located and used gpio 5 for DI, and gpio2 for CLK, instead of 3. I manually set those in dd-wrt, and it worked.