You don't have the modified switch-robo.ko module loaded then. Make sure that it is saved in your JFFS directory, unload the old module, and load the new one. _________________ Read the forum announcements thoroughly! Be cautious if you're inexperienced.
Available for paid consulting. (Don't PM about complicated setups otherwise)
Looking for bricks and spare routers to expand my collection. (not interested in G spec models)
phuz~.. you actually need 2 dhcp clients for it to work exactly the same as isp's router. IPTV traffic goes on 10.x range, so you need an interface configured in this range and then use a multicast proxy like igmpproxy to send it to 192.168.1.x range.
Vlan 105 does not appear but it is bridged directly with port 4 of my router.
I believe that i need to create a sub-interface (like 'voipwan') by using something like you, fggs, suggested...
Do notice that wan and voipwan are both running a dif. dhcp client at the same time...so this will work once i attach a dhcp on the subinterface eth1.105
Right.. I won't run sip because my router (RT-N16) doesn't have RJ11 port, so I'm "redirecting" vlan101 to TG784.
As I said, I made IPTV working with igmpproxy, I don't see how IPTV would work without a multicast proxy because TV box can't handle routing, so when you bridge a port to vlan105 TV box will get ip in 10.X range, then who is gonna take care of the routing? Anyway.. I'm not network expert.
Right.. I won't run sip because my router (RT-N16) doesn't have RJ11 port, so I'm "redirecting" vlan101 to TG784.
As I said, I made IPTV working with igmpproxy, I don't see how IPTV would work without a multicast proxy because TV box can't handle routing, so when you bridge a port to vlan105 TV box will get ip in 10.X range, then who is gonna take care of the routing? Anyway.. I'm not network expert.
well, it has been working for the past 3 weeks like that...i can change channels, record programs, check the EPG and even see teletext! but what won't work for sure is the multimedia sharing (watching photos/hearing music from my WMP PCs), since they are on a diff. vlan (internet=100; iptv=105), hence i'm having all this trouble to make this work like VF has done.
Regarding your q, im no network expert too...and tbh idk much about linux either...but regarding iptv and from what i've read, when dealing with multicasting you don't need to route anything - you announce (broadcast) that you're "alive" and that your stb is in multicasting group "x" and the ISP routers put you on that group...when you change channel, the stb sends a request to a diff. multicasting group and the process repeats itself...
This is something like you did when you tuned an old TV set to a specific frequency so to watch that channel, but with the difference that it is the iptv routers on the isp that tunes you in...you only shout on the network to be part of "that" channel (aka multicasting group)...of course you're only tuned in IF you're authorized...(stb certs + AES256 encryption keys + idk).
One big problem is QoS imho...even if i can place vlan 105 working inside the vlan 100, the router igmp proxy server will generate quite a few multicast traffic on the lan side...so it will be needed to place a few QoS so to avoid lag both on TV sets as well as on PCs and Voip...
Last edited by Keeper75 on Sun Feb 27, 2011 4:48; edited 1 time in total
Good to know, seems like a much simpler setup. Perhaps I prefer things the hard way, who knows why..
I guess I'm happy that I could setup my router exactly as TG784, except from SIP. I still need to do more tests and clean ups, for example unbridge wireless because igmpproxy traffic makes it impossible to use.
You don't have the modified switch-robo.ko module loaded then. Make sure that it is saved in your JFFS directory, unload the old module, and load the new one.
Something, i'm not doing right, just searched all night on WIKI, and nothing, i enabled JFFS on GUI, on SSH, and it says that has 512KB/316KB FREE.
But don't now how to access to see the switch-robo.ko is there, or how i can unload the old one.
Any one have any Toturial/Manual?
Thanks.
Last edited by doell_60 on Sun Feb 27, 2011 17:16; edited 1 time in total
Detailed config:
proxy: ims.vodafone.pt
outbound proxy: proxythomson.ims.vodafone.pt
use outbound proxy -> yes
use ob proxy in dialog -> yes
Register -> yes
Display name -> Home Phone for example
user id -> Your phone number with +351
Password -> sip password
use auth id -> yes
auth id .- > +351xxxxxxx@ims.vodafone.pt
Detailed config:
proxy: ims.vodafone.pt
outbound proxy: proxythomson.ims.vodafone.pt
use outbound proxy -> yes
use ob proxy in dialog -> yes
Register -> yes
Display name -> Home Phone for example
user id -> Your phone number with +351
Password -> sip password
use auth id -> yes
auth id .- > +351xxxxxxx@ims.vodafone.pt
I believe you're missing the proxy ports (ports=5060). You need to define a sip port (5060) and a proxy port (5060).
If it still doesn't work after you set the ports, disable the ob proxy and disable the firewall.
If it STILL doesn't work, check if your sip authentication is correct (user id/password).
Display name -> Home Phone for example
user id -> Your phone number with +351
Password -> sip password
use auth id -> yes
auth id .- > +351xxxxxxx@ims.vodafone.pt
The only thing i don't understand is the SIP Password that i don't have.
You don't have the modified switch-robo.ko module loaded then. Make sure that it is saved in your JFFS directory, unload the old module, and load the new one.
Something, i'm not doing right, just searched all night on WIKI, and nothing, i enabled JFFS on GUI, on SSH, and it says that has 512KB/316KB FREE.
But don't now how to access to see the switch-robo.ko is there, or i can unload the old one.
Any one have any Toturial/Manual?
Thanks.
Can any one help me with this? A Toturial page, something would help.