Joined: 29 Sep 2006 Posts: 18 Location: Over the hill and far away
Posted: Fri Jan 05, 2007 0:39 Post subject: Moto WR850G v1 and Wiki Bullshit
the Wiki for WR850G v1 seems to be bullshit as for DD-WRT 23SP2.
DD-WRT 23SP2 moto micro/mini will lock LAN ports(eth0) on WR850G v1 ( i confirm 25 found in forum messages ) and connect WAN port(eth1) to bridge, even manual commands
nvram set lan_ifnames="eth0 eth2"
nvram set wan_ifname=eth1
nvram set wan_ifnames=eth1
nvram confirm
reboot
will bring nothing - LAN and WAN will be dead
Any clever ideas ? _________________ DSL <-> Dlinkosys 2.02 <-> 2x WLA-54C DD-WRT 23 SP2 <-> FBox FON WLAN
It means that afterburner is NOT enabled. I checked the code and this is default for motorola v1.
If you can confirm that setting this to 0x0388 work well, I will change the dd-wrt code.
Joined: 29 Sep 2006 Posts: 18 Location: Over the hill and far away
Posted: Fri Jan 05, 2007 13:56 Post subject:
P.P.S.
as by Moto WE800 V1 there can be also subversions of WR850G v1 ( i have here
2 diffrent WE800 V1 units, one seems to be 100% linksys WAP54Gv1 with motorola firmware (same CPE with default IP 192.168.1.245 etc ) _________________ DSL <-> Dlinkosys 2.02 <-> 2x WLA-54C DD-WRT 23 SP2 <-> FBox FON WLAN
as by Moto WE800 V1 there can be also subversions of WR850G v1 ( i have here
2 diffrent WE800 V1 units, one seems to be 100% linksys WAP54Gv1 with motorola firmware (same CPE with default IP 192.168.1.245 etc )
I know, we800g and wap54g are can only be tell apart by mac
(if NOT motorola mac, the it is wap)