DD-WRT V24 Special
Our special DD-WRT standard/micro distribution which an additional PPPOE-Relay (standard only), Per User Bandwith Control and Zero IP Hotspot. In the beginning this version was mainly designed for WRT54Gv5/v6 and WRT54GS v5/v6 routers. Now we support a full range of wireless routers. Updates will be provided per email (on request) and in a special forum category. We will add additional features in this release. Feature upgrades are free for our customers.
After we receive the payment you get an email which includes the download link. In the download area you can choose the required version for your router. The new image can be used to upgrade any unit with an already preinstalled dd-wrt.
DD-WRT supported/tested router hardware versions
Only router models running the old K2.4 build. Later models running on K2.6 are not supported by this software!
Read the flashing notes relevant to your hardware!
Router Serial Number prefixes
-
- Allnet ALL0277
- Buffalo WHR-G54S
- Buffalo WHR-G125
- Buffalo WHR-HP-G54
- Buffalo WZR-HP-G54
- Buffalo WBR-G54
- Buffalo WLA-G54
- Buffalo WBR2-G54
- Buffalo WBR2-G54S
- Buffalo WZR-RS-G54
- Buffalo WZR-G300N Mimo / Nfinity (v24 only)
- Belkin F5D7130/7330 (2mb flash)
- Belkin F5D7230-4 v1444 (2mb flash)
- Belkin F5D7230-4 v1000
- Belkin F5D7231-4
- ASUS WL500G-Deluxe
- ASUS WL500G-Premium
- ASUS WL-300g
- ASUS WL-500g
- Linksys WRT54G 1.0 CDF0xxx or CDF1xxx
- Linksys WRT54G 1.1 CDF2xxx or CDF3xxx
- Linksys WRT54G 2.0 CDF5xxx
- Linksys WRT54G 2.2 CDF7xxx
- Linksys WRT54G 3.0 CDF8xxx
- Linksys WRT54G 3.1 CDF9xxx
- Linksys WRT54G 4.0 CDFAxxx
- Linksys WRT54G 5.0 (JTAG only with cfe update, see http://wrt-wiki.bsr-clan.de/index.php?title=Flash_Your_Version_5_WRT54G)
- Linksys WRT54GL 1.0 CL7Axxx
- Linksys WRT54GL 1.1 CL7Bxxx
- Linksys WRT54GS 1.0 CGN0xxx or CGN1xxx
- Linksys WRT54GS 1.1 CGN2xxx
- Linksys WRT54GS 2.0 CGN3xxx
- Linksys WRT54GS 2.1 CGN4xxx
- Linksys WRT54GS 3.0 CGN5xxx
- Linksys WRT54GS 4.0 CGN6xxx
- Linksys WAP v1.0 (micro only)
- Linksys WAP v2.0 (micro only)
- Linksys WAP v3.0 (micro only)
- Linksys WRTSL54GS CJK0xxx
- Linksys WRT300N v1 (v24 only)
- Motorola WR850G/GP --> see flashing notes below
- Siemens Gigaset SE505 --> see flashing notes below
- Siemens Gigaset SX550i --> same as SE505
- Ravo W54-RT --> see flashing notes for SE505 v1 (identical to SE505 v1)
- Askey RT210W --> see flashing notes for SE505 v1 (identical to SE505 v1)
Linksys WRT54G/GS (any version) flashing notes
For upgrading from the original Linksys firmware, please use the generic mini version (dd-wrt.vXX_mini_generic.bin) and flash it from the web GUI interface. After this first flashing it is possible to change to any other distribution. Flashing via the web GUI interface: always use the included 'generic' binaries. The other Linksys router specific binaries are only for tftp upgrades.
Motorola WR850G flashing notes
Just use the dd-wrt.v23_mini_moto.bin for initial flashing of the motorola device using the boot wait state.
WARNING-Never clear the nvram by the mtd utility-WARNING
The mtd utility will erase the nvram. This will delete your hardware MAC adresses which aren't stored in the CFE like in other routers. DD-WRT itself prevents this if a Motorola router is detected. The mtd command line utility can brick your router!
Siemens Gigaset SE505 Flashing notes
Flashing the Siemens Gigaset SE505: You must use the dd-wrt.v23_mini_generic.bin with boot tftp on 192.168.2.1. The Siemens default settings do not fit the Linksys/dd-wrt settings. You must check your configuration details after flashing.
Initially we wrote this modification to use a Linksys WRT54G/GS with our wireless lan as a budget-priced replacement for our professional priced Lancom and Orinocco access points. So what's missing? First of all we are using radius authentication with a central account management for user authentication. There was already a radius application available for OpenWRT. OpenWRT is only user friendly for a computer professional with linux knowledge. So we integrated small enhancements, our wrt-radauth modifications, in the alchemy software.
Radius server timeouts are no longer a problem. The client is authenticated just up to the point. The server says really 'no'. A connection timeout hasn't any influence to the workflow. Additionally, we found it really helpfull to use an external filesystem inside the WRT. So our choice was a samba client, useable on any computer platform. You easilly mount a windows network share into the wrt and its possible to start a script after mounting the device. Still our work was far from over. The server/client watch function is still under development. We already implemented the RFlow traffic monitoring and management tool into the web interface. This utility was already built inside DD-WRT but you had to start it manually. It was still unfinished, the daemon mode didn't work. So we finished it and now its working inside DD-WRT and you can configure via the administration window.
