Talk:Client Bridged

From DD-WRT Wiki

Jump to: navigation, search

Three statements which one is true?

1 New Wiki Material-Client Bridge
First of all, do not even try to do client bridge with dd-wrt SP1. It won't work.

2 Former Wiki Material
Client Bridge is said to be working with the old V23 SP2 build...but not the newest V24 builds.

3 V24 builds
Confirmed working on V24-Final V24-SP1 V24 Pre-SP2

[edit] ===============================================

Ok, well just wanted to throw in a few points on this article.

Under Former Wiki material:

- host router is an Actiontec MI24-WR, via Verizon FiOs. Not Linux-based (as far as I know) and mine worked fine. No issues.


Under V24 Builds, in the setup as explained by redhawk:

- I can confirm it works with v24-sp2 (07/22/09) micro. 
- Step 5 should also mention that Local DNS (after setting gateway) needs to be set to the same ip as the gateway (192.168.1.1 in most cases) and NOT left at 0.0.0.0. I was following instructions to the T and didn't touch this at first, and so I could see both routers (AP and CB) on both computers, but CB computer had no internet.  


= San Aequitas, 18JUL2010