Buffalo WZR-HP-AG300H
From DD-WRT Wiki
This page is a WIP, please feel free to add useful infos
WZR-HP-AG300H Hardware Info
| CPU | Atheros AR7161 |
|---|---|
| CPU Speed | 680 MHz |
| Flash ROM | 32 MB |
| RAM | 128 MB |
| Radios | 1x 2.4 GHz / 1x 5Ghz |
| WLAN Support | A/B/G/N |
| WLAN Max Speed | 300 mbps |
| Antenna Location | 2x fixed external |
| Switch | 4x GigE + 1 WAN |
| USB | 1x USB 2.0 |
Flashing instructions
This unit ships with the buffalo pro dd-wrt build 15940 pre-flashed onto the router. If you would like to use community builds for this unit (non-buffalo branded dd-wrt), then you will need to follow these steps to flash the community dd-wrt build onto the unit. And to note, this method will work for going from buffalo pro dd-wrt or buffalo user friendly firmware to community dd-wrt.
1) Download the community dd-wrt build for this model using the link below.
2) Perform a reset on the router holding the reset button down for 30 seconds and then release.
3) Set a static IP on your PC to 192.168.11.2 and subnet 255.255.255.0, gateway 192.168.11.1
4)