Linksys E4200
From DD-WRT Wiki
(Difference between revisions)
Revision as of 19:06, 12 April 2011 (edit) Mrichmon (Talk | contribs) (→Hardware Specifications) ← Previous diff |
Revision as of 19:29, 12 April 2011 (edit) (undo) Mrichmon (Talk | contribs) (→Hardware Specifications) Next diff → |
||
Line 12: | Line 12: | ||
|- | |- | ||
! Flash ROM | ! Flash ROM | ||
- | | 16 MB | + | | 16 MB<br>Macronix MX25L12845E |
|- | |- | ||
! RAM | ! RAM | ||
Line 33: | Line 33: | ||
|- | |- | ||
! Switch | ! Switch | ||
- | | 4x GigE + 1 WAN | + | | 4x GigE + 1 WAN<br>Broadcom 53115<br>IEEE 802.3/3u/3ab |
|- | |- | ||
! USB | ! USB | ||
| 1x USB 2.0 | | 1x USB 2.0 | ||
|} | |} | ||
+ | |||
+ | Radio wl0 is Broadcom 4718 (SoC) | ||
+ | |||
+ | |||
+ | Radio wl1 is Broadcom 4331 Intensi-fi Single-Chip 802.11n Transceiver | ||
+ | |||
+ | == Flashing == | ||
+ | |||
+ | === Warnings === | ||
+ | |||
+ | * The e4200 is very sensitive to the nvram size. The only safe nvram size identified for this router is an nvram size of 60kB. Recovery from a firmware with the wrong nvram size requires use of a jtag cable to erase the nvram.<sup>1</sup> | ||
+ | |||
+ | |||
+ | == References == | ||
+ | # [http://www.dd-wrt.com/phpBB2/viewtopic.php?t=86316&postdays=0&postorder=asc&start=210|Linksys e4200 build thread] at dd-wrt forum | ||
+ | # [https://fjallfoss.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits&RequestTimeout=500&calledFromFrame=N&application_id=699190&fcc_id='Q87-E4200'|<nowiki>FCC</nowiki> disclosures ] |
Revision as of 19:29, 12 April 2011
Contents |
Hardware Specifications
CPU | Broadcom BCM4718 |
---|---|
CPU Speed | 480 MHz |
Flash ROM | 16 MB Macronix MX25L12845E |
RAM | 64 MB |
Radios | 2.4 GHz, 5 GHz |
WLAN Support | a/b/g/n |
WLAN Max Speed | 450 mbps |
Antenna Location | Internal (x6) |
Bands | 3 x 3 |
Switch | 4x GigE + 1 WAN Broadcom 53115 IEEE 802.3/3u/3ab |
USB | 1x USB 2.0 |
Radio wl0 is Broadcom 4718 (SoC)
Radio wl1 is Broadcom 4331 Intensi-fi Single-Chip 802.11n Transceiver
Flashing
Warnings
- The e4200 is very sensitive to the nvram size. The only safe nvram size identified for this router is an nvram size of 60kB. Recovery from a firmware with the wrong nvram size requires use of a jtag cable to erase the nvram.1
References
- e4200 build thread at dd-wrt forum
- FCC disclosures