TP Link WR1043nd UMTS Probleme

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC basierende Hardware
Author Message
maniman2
DD-WRT Novice


Joined: 05 Dec 2012
Posts: 6

PostPosted: Wed Aug 26, 2015 6:33    Post subject: TP Link WR1043nd UMTS Probleme Reply with quote
Hallo Leute,
hab ein kleines Problem, welches ich selbst mit Foren-Durchsuchen usw. nicht lösen kann, vl habt ihr eine Antwort parat!

TPLink WR1043ND v2 DD-WRT v3.0-r27745 std (08/25/15)
USB Unterstützung aktiviert
WAN Type: Mobile Broadband
APN: drei.at
Kein Pin/Kein Username. Einwählen mit *99#.
Mit genau den selben Einstellungen kann ich mich am PC manuell einwählen.

Verschiedene UMTS Sticks alt une neue LTE wurden getestet.(HUAWEI E169G, E156G, E3372)

Leider schaffe ich keine Verbindung. DDWRT sagt immer Not Connected und Signal -40dbbm.

Code:


root@DD-WRT:~# nvram show | grep 3gdata
size: 24947 bytes (40589 left)
3gdata=/dev/usb/tts/0

root@DD-WRT:~# comgt -d /dev/usb/tts/0
SIM ready
Waiting for Registration..(120 sec max)
Registered on Home network: 3 AT",2
Signal Quality:8,99

root@DD-WRT:~# cat /proc/bus/usb/devices
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.18
S:  Manufacturer=Linux 3.18.20 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=ehci-platform.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 1
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.18
S:  Manufacturer=Linux 3.18.20 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=ehci-platform.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=1506 Rev= 1.02
S:  Manufacturer=HUAWEI_MOBILE
S:  Product=HUAWEI_MOBILE
C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=12 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=02 Prot=16 Driver=(none)
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=2ms
I:  If#= 2 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=16 Driver=(none)
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us


Vielen Dank!
MfG
Manuel Wagner
Sponsor
bospre
DD-WRT Novice


Joined: 12 Jan 2014
Posts: 22

PostPosted: Fri Jan 08, 2016 6:35    Post subject: Reply with quote
Hallo,
auch wenn dieser Post bereits etwas älter ist, vielleicht hilft das dem einen oder anderen weiter:

Mit den aktuellen Builds geht es bei mir auch nicht.
Ich verwende daher auf dem Router die letzte Build von 2014 von Brainslayer.

http://download1.dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2014/12-22-2014-r25697/tplink_tl-wr1043nd/tl-wr1043nd-webflash.bin

Damit funktioniert es bei mir seit über einem Jahr weitestgehend störungsfrei.

Falls jemand rausfindet, warum es mit den aktuellen Builds nicht geht, bzw. an welchen Einstellungen man drehen muss, wäre ich für einen Hinweis dankbar.
bospre
DD-WRT Novice


Joined: 12 Jan 2014
Posts: 22

PostPosted: Tue Sep 20, 2016 18:32    Post subject: Reply with quote
Nur der Vollständigkeit halber:
Ich habe einen anderen UMTS-USB-Stick angeschafft.
Damit funktioniert es jetzt auch wieder mit aktuellen Builds.

Allerdings stürzt der Router od. Stick nach ein paar Tagen ab. Anscheinend ist die Stromversorgung des UMTS-Sticks über die USB-Schnittstelle des Routers nicht ausreichend, so dss dies zu "erratischem" Verhalten führt (Quelle Open WRT).
Da muss ich also noch eine Stromquelle dazwischen schalten
bospre
DD-WRT Novice


Joined: 12 Jan 2014
Posts: 22

PostPosted: Fri Sep 30, 2016 11:59    Post subject: Reply with quote
Achja,
es funktioniert mit einem Huawei E1750.
Mit anderen Sticks hatte ich mit den neueren Builds keinen Erfolg.
Es gibt ja ein Wiki, welches angeblich funktionierende Sticks auflistet.
Das kann man aber meiner Meinung nach vergessen, da ich diverse dort gelistete Sticks ausprobiert habe.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC basierende Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum