Lats
DD-WRT Novice
Joined: 26 Nov 2016
Posts: 4
|
 Posted: Tue Dec 06, 2016 17:58 Post subject: DD-WRT v3.0-r30910M & Logitech Squeezebox |
 |
Hi guys,
I am running DD-WRT v3.0-r30910M (12/02/16) version on my R7000 router. I have configured this couple of days ago.
Most of my devices connect and work fine, except for one:
Logitech Squeezebox.
Controller itself connects to the wifi ok, but when it searches for the scanner, it goes on and on for forever.
Never used to be an issue, so I am sure some configuration somewhere on the router needs to be adjusted.
Any ideas what needs to be done?
Thanks. |
|
Alozaros
DD-WRT Guru
Joined: 16 Nov 2015
Posts: 6447
Location: UK, London, just across the river..
|
| Posted: Tue Dec 06, 2016 18:32 Post subject: |
|
well how do you connect it, wi-fi on 2,4 or 5Ghz or cable try both to eliminate the cause... if its a wi-fi post pic of your wi-fi settings and wi-fi connection status ....make sure you use NG mixed or just Mixed b/g/n standard... others are broken
for example NG mixed for 2,4 and ac/n mixed for 5Ghz
_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913 |
|
mac913
DD-WRT Guru
Joined: 02 May 2008
Posts: 1848
Location: Canada
|
| Posted: Fri Dec 09, 2016 0:40 Post subject: |
|
I too have the Squeeze Box, Squeeze Controller plus the Squeeze Radio. The Controller and Radio connect Wireless and the Box is connected via Ethernet since it's in a fixed location near a switch.
My 2.4Ghz settings on the R7000 are....
Wireless Mode: AP
Wireless Network Mode: Mixed
Wireless Channel: 6 - 2.437Ghz (pick the least congested CH:1,6 or 11)
Channel Width: 20Mhz
Wireless SSID Broadcast: Enable
Optimize Multicast Traffic: Disable
TurboQAM (QAM256) support: Disable
Explicit Beamforming: Disable
Implicit Beamforming: Enable
Airtime Fairness: Disable
Network Configuration: Bridged
Security Mode: WPA2 Personal
WPA Algorithms: AES
WL0 Advanced is all default
_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
YAMon 3.4.6 | DNSCrypt-Proxy V2 |
|
