Router: TPLINK ARCHER-C7 v3
Firmware: DD-WRT v3.0-r31571 std (03/04/17)
Kernel: Linux 3.18.48 #1722 Sat Mar 4 03:04:03 CET 2017 mips
Status: Ok
Reset: No
Errors: None so far (running for about 24 hours)
I downloaded the new V3 firmware but DD-WRT stills reports my C7 V3 router as a V2. Bug?
Also, I now see in the Bandwidth tab an IPTV graph. Is this new to DD-WRT or just my router?
Now 14 days up with no problems. I disabled 5G before updating since didn't need it currently.
Router: Linksys EA8500
Firmware: DD-WRT v3.0-r31571 std (03/04/17)
Kernel: Linux 3.18.48 #125 SMP PREEMPT Sat Mar 4 01:03:28 CET 2017 armv7l
Status: ok
Reset: no
Errors: no
Just wish that the intermittent 5ghz dropout when network is busy issue would go away.
I have zero dropouts on 5GHz.
What are your wireless settings?
What connection speed you have?
What clients dropout?
EDIT: What I use -
beacon interval 148 is better than 100? _________________ シンゴ
Router: Linksys EA8500
Firmware: DD-WRT v3.0-r31571 std (03/04/17)
Kernel: Linux 3.18.48 #125 SMP PREEMPT Sat Mar 4 01:03:28 CET 2017 armv7l
Status: ok
Reset: no
Errors: no
Just wish that the intermittent 5ghz dropout when network is busy issue would go away.
I have zero dropouts on 5GHz.
What are your wireless settings?
What connection speed you have?
What clients dropout?
EDIT: What I use -
beacon interval 148 is better than 100?
I think so, yea.
My current settings for Beacon Interval (have been using for a while):
ath0 = 160
ath1 = 180
Ack timing = 0 for both
Just wondering what y'all are doing when have dropouts?
You have fast WAN connection?
I only have a 20/20 line but .... I can upload/download files locally and to routers SAMBA share and never have problems.
Two devices that will do 433 + another @150 all running at Max and never have drops. Also many other devices that are on 5GHz...But just those three that I control.
Router: Linksys EA8500
Firmware: DD-WRT v3.0-r31571 std (03/04/17)
Kernel: Linux 3.18.48 #125 SMP PREEMPT Sat Mar 4 01:03:28 CET 2017 armv7l
Status: ok
Reset: no
Errors: no
Just wish that the intermittent 5ghz dropout when network is busy issue would go away.
I have zero dropouts on 5GHz.
What are your wireless settings?
What connection speed you have?
What clients dropout?
oh u increase the beacon? it says that increasing it will increase throughput.
will try ur setting
ur ath0 is 2.4ghz right?
EDIT: What I use -
beacon interval 148 is better than 100?
I think so, yea.
My current settings for Beacon Interval (have been using for a while):
ath0 = 160
ath1 = 180
Ack timing = 0 for both
Just wondering what y'all are doing when have dropouts?
You have fast WAN connection?
I only have a 20/20 line but .... I can upload/download files locally and to routers SAMBA share and never have problems.
Two devices that will do 433 + another @150 all running at Max and never have drops. Also many other devices that are on 5GHz...But just those three that I control.
Router: TPLINK ARCHER-C7 v3
Firmware: DD-WRT v3.0-r31571 std (03/04/17)
Kernel: Linux 3.18.48 #1722 Sat Mar 4 03:04:03 CET 2017 mips
Status: Ok
Reset: No
Errors: None so far (running for about 24 hours)
I downloaded the new V3 firmware but DD-WRT stills reports my C7 V3 router as a V2. Bug?
Also, I now see in the Bandwidth tab an IPTV graph. Is this new to DD-WRT or just my router?
Now 14 days up with no problems. I disabled 5G before updating since didn't need it currently.
Up 25 days with no problems. Maybe 5G was causing stability problems. For kicks I will enable 5G to see if that affects stability.
Posted: Tue Apr 04, 2017 6:10 Post subject: Load average bar
petra222 wrote:
Router:TPLINK TL-WDR4300 v1
Firmware:r31571 US webflash from r28112
Kernel: 3.10.105 #29058 Sat Mar 4 02:11:16 CET 2017 mips
Status:Great (Stable)
Reset:No
Errors:None that i can see
Wow! working great for 48hrs no random reboots, got forwarded ports set,voip (magic jack)no problems at all!
GUI works well, all graphs seam to be working
Wireless is stable 2.4g no problems,5.0g seams to be working well quit stable although 5g won't auto connect, might be my flakey tablet.
My wireless setting are 2.4g NG mixed,Channel wide Dynamic 20/40MHz, auto channel
Setting for my 5.0g are NA mixed,Channel wide Dynamic 20/40MHz, auto channel no 5g led though(baby tears)
Thanks to the developers for all there hard work and effort.
I've noted thar the load average bar seems no sense with Load average numbers in 1min, 5 min and 15 min are aways low and number bar is high after boot and takes a long time to decrease while load numbers still low
Router: TPLINK ARCHER-C7 v3
Firmware: DD-WRT v3.0-r31571 std (03/04/17)
Kernel: Linux 3.18.48 #1722 Sat Mar 4 03:04:03 CET 2017 mips
Status: Ok
Reset: No
Errors: None so far (running for about 24 hours)
I downloaded the new V3 firmware but DD-WRT stills reports my TP-Link C7 V3 router as a V2. Bug?
Also, I now see in the Bandwidth tab an IPTV graph. Is this new to DD-WRT or just my router?
Now 14 days up with no problems. I disabled 5G before updating since didn't need it currently.
Up 25 days with no problems. Maybe 5G was causing stability problems. For kicks I will enable 5G to see if that affects stability.
I enabled 5G on 4/3/17 and router bombed on 4/24/17. So there must be bug in the 5G driver. I have disabled 5G again.
If the dev team needs a TP-Link C7 V3 router, I can donate one.
