Router: E4200
Firmware: r32868
Status: Working with issues
Reset: Yes
Errors: Web GUI doesn't display all components, time won't update (no time sync with NTP servers)
Last edited by johnnyNobody999 on Fri Jul 28, 2017 22:33; edited 1 time in total
Note the start of HTML comment that kills the rest of the page. The script tags are included for context.
wds.png is missing (404) when using Wiviz Survey. Also, hidden SSIDs show as question marks with what looks like a random number of characters (is this normal?).
E2500
DD-WRT v3.0-r32868 mega (07/27/17)
Linux 3.10.107 #15362 Thu Jul 27 09:41:22 CEST 2017 mips
[dd-wrt.v24-32868_NEWD-2_K3.x_mega.bin]
done an 'erase nvram'
download 55.54 Mbps .. SFE off
download 89.81 Mbps .. SFE on -- Wow this router never seen that before using a K3.x build
If you use one of the off color styles the services page is somewhat readable.
Router GUI Style 'xirian' probably the best which actually has the save & apply buttons.
QOS is completely borked but all else seems to work for me ... WiFi is good.
Note the start of HTML comment that kills the rest of the page. The script tags are included for context.
wds.png is missing (404) when using Wiviz Survey. Also, hidden SSIDs show as question marks with what looks like a random number of characters (is this normal?).
Confirmed that DNSSEC is causing this issue.
SSH into the box, nvram unset dnssec, dnssec_cu dnssec_proxy and the web interface gets fixed.
But SFE works fine, the RT-N16 delievers 200 Mbps download speed. It does use almost 100% CPU. CTF by Broadcom apparently spares from intensive processor usage. _________________ 2 times APU2 Opnsense 21.1 with Sensei
2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)
3 times Asus RT-N16 shelved
E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)
3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)
Hardware: DIR-890L
DD-WRT Versions: r32753 and r32868
OpenVPN did not work with either version. Did a factory settings reset, 30-30-30 reset and reinstall of the firmware with clean config with only OpenVPN configured on both versions and no still no joy.
I went back to 32597 and had no issues.
Notes: It looked like it wasn't running at all when it was enabled in the GUI. I ssh'd to the router and ran ps...I didn't see openvpn running in either r32753 and r32868. The openvpncl directory was present, certs were present, openvpn.conf present, route-up.sh and route-down sh present, but no logs found. The Status-VPN screen was empty.
When I fell back to 32597, everything was there including the log files and everything present in Status-VPN.
EDIT: This is likely not a build related issue. When I rebooted my router, I couldn't get VPN started again. I will post a more detailed explanation elsewhere.
Last edited by slayer991 on Thu Aug 03, 2017 1:27; edited 1 time in total
Confirmed that DNSSEC is causing this issue.
SSH into the box, nvram unset dnssec, dnssec_cu dnssec_proxy and the web interface gets fixed.
Alas, that doesn't work on my unit either when simply unset and page is reloaded or the browser is closed and opened with cache deleted (even after nvram commit for good measure). The settings are then recreated after reboot. They were all initially set to 0 anyway.
Router: D-Link DIR-860L A1 Status: Working Reset: NO Errors: Wifi DL speed not grate but wasnt in 597 either 2G 7ms 19/51mbit, 5G is 6ms 14/90 and lan is 2ms 96/96
Router: Archer C9 v1
Firmware: r32868
Status: would not update
Reset: no
Errors: r32868 would not update from the webgui in r32753. Router rebooted back in to r32753 after trying to perform upgrade. Using the router as an AP with a WRT3200ACM as primary router running r32868.
Update: I re-downloaded the r32868 webflash file and tried it again. This time it updated after what seemed like a very long reboot (~3-4 minutes). Seems to be running fine with r32868; again, using the Archer C9 v1 as an AP so almost all extra features are turned off.
Last edited by pekkleminer on Sun Jul 30, 2017 22:49; edited 1 time in total
Using Fios, TP-LINK Archer C9 flashed with DD-WRT v3.0-r32868 std.
cannot change queueing discipline from SFQ to FQ_CODEL or CODEL or PIE. When I apply changes, it defaults back to SFQ. Can Change HTB or HFSC and the change sticks, but not the queueing discipline.
After so many problems, so many posts of bricked routers, why hasn't this build been pulled? Expect this post to be deleted or edited by moderators after so many of mine have been before for having the audacity to "complain" or warn others.
After so many problems, so many posts of bricked routers, why hasn't this build been pulled? Expect this post to be deleted or edited by moderators after so many of mine have been before for having the audacity to "complain" or warn others.
Because:
Quote:
WARNING:This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29000_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.
After so many problems, so many posts of bricked routers, why hasn't this build been pulled? Expect this post to be deleted or edited by moderators after so many of mine have been before for having the audacity to "complain" or warn others.
Because:
Quote:
WARNING:This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29000_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.
Flipper you are a pain in the rear.im really tempted to ask you be banned. As a matter of fact I will.
Now when you come back, I hope you will be more humble. _________________ I am far from a guru, I'm barely a novice.
