FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
Almost made it 8 hours. This one rebooted on me on my 3200. 33345 did the same. Back to 33342 for me. _________________ NETGEAR R9000 DD-WRT v3.0-r45192 std (12/29/20) (ROUTER)
NETGEAR ORBI Stock FW V2.7.2.102 (MESH)
WRT3200ACM (BS Build Usually) (BACKUP)
Joined: 13 Jun 2006 Posts: 1608 Location: SE Michigan USA
Posted: Wed Sep 20, 2017 19:53 Post subject:
Installed just now on my wrt3200. Looks good so far, but up only 15 minutes. Was having some issues with LEDE r4707 after running clean for 5+ days. Then yesterday had a short period of time with no Internet connection both wired and wireless. Today I had this happen twice so figured I would give BS's latest build a try.
Configured from previous backup, as BS said that should normally work. Worst case I reconfigure.
FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
Installed r33375 on my Linksys WRT1900ACS v1 as a flash upgrade without issues this morning (up 12hrs so far). I kept existing config, will post if I find any issues.
________________
Linksys WRT1900ACS v1 - r33375
Joined: 05 Apr 2017 Posts: 981 Location: Louisiana, USA
Posted: Thu Sep 21, 2017 2:27 Post subject:
I figured. I already know the likely outcome, but I'm an optimist so I keep trying.
I love 31924 for it's stability, but on the newer builds the GUI loads faster. Web pages too. The GUI section tabs respond much quicker. Samba doesn't have to be manually restarted.
There's also the small stuff like the USB LEDs are the same as stock firmware with the USB 3.0 LED working too.
FIRMWARE:OpenWrt SNAPSHOT r8217-2cc821e / LuCI Master (git-18.276.41146-280dd33) MODEM:ARRIS SURFBoard SB8200 ROUTER:Linksys WRT32X USB NAS:Western Digital BLACK 1 TB Hardrive + Startech USB 3.0 External SATA III Enclosure
to those who are already running this new build.. pls. try unplugging your router from the modem to check if your internet light goes off? amber? or something else?
if it remains the same status even without internet connection then this might be a bug, same does with my linksys wrt1200acv2
Didn't someone say that Brainslayer get's the latest open source drivers for the chipsets...Are those drivers not the same quality that the Manufacturer's drivers are OR is there some sort of other issue with third party firmware and the WiFi drivers? Seems strange that this is such a long standing issue?