Posted: Sat Sep 16, 2017 5:39 Post subject: R9000 5ghz tx power
Hello I have a r9000 that seems to only want to go to 23dBm on the 5ghz band at Channel40 + 42 (5200 MHz VHT80) No matter what i set the tx power to. On the 2.4ghz side i get to 30dBm at 1 + 5 (2412 MHz HT40). I have a large house and am trying to get as much range as possible especially on the 5ghz side. iwconfig eth0 txpower does not seem to change the tx ether.
I live in the US not near any military sites or weather radars so I should be able to push out more power.
Any other tips to increase wifi range? The device i mostly have problems with is my old Iphone 5s, hopefully i will be getting a iphone x soon.
Joined: 30 Jan 2015 Posts: 676 Location: Texas, USA
Posted: Sat Sep 16, 2017 20:08 Post subject:
Yes, this is one of the severe limitation, at least while using 160Mhz bandwidth.
The only valid combination for (80Mhz + 80Mhz ) is 138 +144 +155, so forces it to 23dBm, even if you set it to 30dBm _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
Yes, this is one of the severe limitation, at least while using 160Mhz bandwidth.
The only valid combination for (80Mhz + 80Mhz ) is 138 +144 +155, so forces it to 23dBm, even if you set it to 30dBm
Joined: 30 Jan 2015 Posts: 676 Location: Texas, USA
Posted: Mon Sep 18, 2017 0:17 Post subject:
Yes, currently not possible to have 30dBm set for 160Mhz Bandwidth. However BS can change this. _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh