Posted: Thu Sep 07, 2017 17:28 Post subject: Re: Ne USB LED
Scootcha wrote:
The USB LED indicator light no longer lights up. Tested on 2 routers with both printer and disk devices.
I am afraid the deal is this: USB devices no longer automount at boot. They mount if you press Apply under Services / USB. _________________ 2 times APU2 Opnsense 21.1 with Sensei
2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)
3 times Asus RT-N16 shelved
E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)
3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)
Posted: Thu Sep 07, 2017 19:54 Post subject: Re: Ne USB LED
slobodan wrote:
Scootcha wrote:
The USB LED indicator light no longer lights up. Tested on 2 routers with both printer and disk devices.
I am afraid the deal is this: USB devices no longer automount at boot. They mount if you press Apply under Services / USB.
Your Services > USB > Apply Setting workaround suggestion lights it up. Thanks.
Automount failing is not quite the scenario I am currently seeing with 33215 though. I haven't seen any operational issues with the disk not automounting. After booting the disk mounts just fine, SAMBA/Network Explorer from my PCs may take longer than usual to see the drive but eventually do along with my backup applications. The printer off the same USB hub works properly right after reboots too. The only constant issue I am seeing is the cosmetic one that the USB indicator LED never illuminates.
The LED indicator last worked properly with 32868 (The 33180 and 33006 loads failed for me).
Router/Version: DIR-860-A1
Kernel: 4.4.84
Previous: 33215
Mode/Status: Router
Reset: No
Issues/Errors: All seem ok, except USB HD does not mount at boot and is off after reboot. hitting apply will enable the usb support. (worked on 33006)
and
2.4G Network is still unstable.
Router/Version: DIR-860-A1
Kernel: 4.4.84
Previous: 33215
Mode/Status: Router
Reset: No
Issues/Errors: All seem ok, except USB HD does not mount at boot and is off after reboot. hitting apply will enable the usb support. (worked on 33006)
and
2.4G Network is still unstable.
Imho, this is a K4.x specific problem. I don't have it on K3.x. _________________ 2 times APU2 Opnsense 21.1 with Sensei
2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)
3 times Asus RT-N16 shelved
E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)
3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)
Router/Version: DIR-860-A1
Kernel: 4.4.84
Previous: 33215
Mode/Status: Router
Reset: No
Issues/Errors: All seem ok, except USB HD does not mount at boot and is off after reboot. hitting apply will enable the usb support. (worked on 33006)
and
2.4G Network is still unstable.
Imho, this is a K4.x specific problem. I don't have it on K3.x.
Happening also in K3.x
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=1093915#1093915 _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
Joined: 02 Jan 2015 Posts: 69 Location: Gdansk, Poland
Posted: Sat Sep 23, 2017 22:32 Post subject:
Router/Version:
WRT600N V1.1
Firmware:
DD-WRT v3.0-r33215 mega (08/25/17)
Kernel:
DD-WRT v3.0-r33215 mega (08/25/17)
Previous:
2006
Mode/Status:
Working
Reset:
no
Issues/Errors:
none at this moment, Wifi 2.4 and 5GHz works, VPN works,
Speed on 5G 46,5/9,97 @120/10 mbps 270mbps connected
Speed on 2,4G 13,5/9,97 @120/10 mbps 130mbps connected
Speed on 1GBIT 58,8/9,97 @120/10 mbps 1Gbit connected