Tp-Link TL-WR1043ND rev 2.1 optware ?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Оборудование на основе Atheros WiSOC
Goto page Previous  1, 2, 3
Author Message
hdv
DD-WRT Novice


Joined: 26 Nov 2017
Posts: 24

PostPosted: Mon Dec 04, 2017 11:33    Post subject: Reply with quote
Rolling Eyes
vasek00, подскажите номер релиза, с которого сделаны скрины, поставлю себе такой же и буду на нем тестировать работоспособность...

з.ы. круто! а я мучаю себе голову... Mad

_________________
linux drop
Sponsor
hdv
DD-WRT Novice


Joined: 26 Nov 2017
Posts: 24

PostPosted: Mon Dec 04, 2017 11:39    Post subject: Reply with quote
на версии 28788 вкладка NAS гораздо скуднее, там только Samba (((
_________________
linux drop
vasek00
DD-WRT Guru


Joined: 06 Nov 2010
Posts: 3227

PostPosted: Mon Dec 04, 2017 12:25    Post subject: Reply with quote
hdv wrote:
на версии 28788 вкладка NAS гораздо скуднее, там только Samba (((

Весь расклад зависит от емкости flash в роутере, а релиз последний.
hdv
DD-WRT Novice


Joined: 26 Nov 2017
Posts: 24

PostPosted: Mon Dec 04, 2017 12:28    Post subject: Reply with quote
у меня TL-WR1043ND rev 1 - flash не помню какая, вроде бы 8
данные free следующие:
root@DD-WRT:/bin# free
total used free shared buffers cached
Mem: 29308 21604 7704 0 1040 6936
-/+ buffers/cache: 13628 15680
Swap: 0 0 0

данные wikidev
CPU1: Atheros AR9132 (400 MHz)
FLA1: 8 MiB (STMicroelectronics 25P64V6P)
RAM1: 32 MiB (Hynix HY5DU561622FTP-D43)

_________________
linux drop
hdv
DD-WRT Novice


Joined: 26 Nov 2017
Posts: 24

PostPosted: Mon Dec 04, 2017 12:36    Post subject: Reply with quote
vasek00 в общем и целом посыл понятен! спасибо за наводки. пробую свежую прошивку, если разделов не появится, то скорее всего буду переходить на более мощный роутер без этих танцев с бубнов)
для себя пока присмотрел zyxel kinetic omni 2 либо viva (но это уже другая тема и другой форум)

Благодарю вас.

_________________
linux drop
vasek00
DD-WRT Guru


Joined: 06 Nov 2010
Posts: 3227

PostPosted: Tue Dec 05, 2017 6:05    Post subject: Reply with quote
hdv wrote:
vasek00 в общем и целом посыл понятен! спасибо за наводки. пробую свежую прошивку, если разделов не появится, то скорее всего буду переходить на более мощный роутер без этих танцев с бубнов)
для себя пока присмотрел zyxel kinetic omni 2 либо viva (но это уже другая тема и другой форум)

Благодарю вас.

Разделы не причем, важен размер. В 16 можно запихнуть больше, чем в 8 прошивку.
Только не на omni2 (8МБ) и не на viva (слабовата антенна) - они на 7620 который снят с производства. Если вопрос цены/денег и Zyxel постарайтесь найти что-то из старой серии KII/GigaII/Ultra - они на RT6856 (то же снят, но проц по мощней двух поточный, у всех памяти 16 и мин.128/256, ядро 3.4) да и цена на старенькое будет не очень.
GigaII - https://market.yandex.ru/product--zyxel-keenetic-giga-ii/9350213?clid=703
hdv
DD-WRT Novice


Joined: 26 Nov 2017
Posts: 24

PostPosted: Tue Dec 05, 2017 7:03    Post subject: Reply with quote
vasek00 огромное спасибо за отзыв!
Zyxel не обязательно. можно любой другой, главное чтобы либо была поддержка торрентов и dlna в стоке, либо поддержка dd-wrt.
По цене потолок 5000.

_________________
linux drop
vasek00
DD-WRT Guru


Joined: 06 Nov 2010
Posts: 3227

PostPosted: Wed Dec 06, 2017 10:40    Post subject: Reply with quote
hdv wrote:
vasek00 огромное спасибо за отзыв!
Zyxel не обязательно. можно любой другой, главное чтобы либо была поддержка торрентов и dlna в стоке, либо поддержка dd-wrt.
По цене потолок 5000.

Тогда удачи с выбором и не забываем https://www.dd-wrt.com/wiki/index.php/Supported_Devices
hdv
DD-WRT Novice


Joined: 26 Nov 2017
Posts: 24

PostPosted: Sun Dec 10, 2017 11:26    Post subject: Reply with quote
как ни крути похоже придется новый роутер брать...
перепрошил я свой 1043nd на стабильную DD-WRT v3.0-r33006 std (08/03/17)

думал появится minidlna хотя бы (точно знаю что он там есть)
но увы, ничего нет...
мало того теперь и USB диск нормально не монтируется, что не так ума не приложу...
не везучий роутер

_________________
linux drop
vasek00
DD-WRT Guru


Joined: 06 Nov 2010
Posts: 3227

PostPosted: Sun Dec 10, 2017 15:46    Post subject: Reply with quote
Вывод dmesg
Второй скрин откуда ?
По умолчанию все в /tmp/mnt/.....
Code:
dmesg
...
<6>[  131.180000] usb 1-1: new high-speed USB device number 2 using ar71xx-ehci
<6>[  131.340000] usb-storage 1-1:1.0: USB Mass Storage device detected
<6>[  131.360000] scsi0 : usb-storage 1-1:1.0
<5>[  132.360000] scsi 0:0:0:0: Direct-Access     Innostor Innostor         1.00 PQ: 0 ANSI: 6
<5>[  132.370000] sd 0:0:0:0: [sda] 15435038 512-byte logical blocks: (7.90 GB/7.35 GiB)
<5>[  132.380000] sd 0:0:0:0: [sda] Write Protect is off
<7>[  132.380000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
<5>[  132.380000] sd 0:0:0:0: [sda] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
<6>[  132.400000]  sda: sda1
<5>[  132.410000] sd 0:0:0:0: [sda] Attached SCSI removable disk
<6>[  132.790000] fuse init (API version 7.22)
...
root@My:~# df
Filesystem           1K-blocks      Used Available Use% Mounted on
rootfs                   28160     28160         0 100% /
/dev/root                28160     28160         0 100% /
/dev/sda1              7715836   2967204   4748632  38% /opt
root@My:~# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
ramfs on /tmp type ramfs (rw,relatime)
none on /dev type tmpfs (rw,relatime,size=512K)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
devpts on /proc/bus/usb type usbfs (rw,relatime)
/dev/sda1 on /opt type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
root@My:~#
hdv
DD-WRT Novice


Joined: 26 Nov 2017
Posts: 24

PostPosted: Sun Dec 10, 2017 17:52    Post subject: Reply with quote
vasek00
второй скрин с вкладки USB

Code:
root@DD-WRT:~# dmesg
<5>[    0.000000] Linux version 3.10.107 (root@linux) (gcc version 6.3.0 (LEDE GCC 6.3.0 r3143-e982c4b) ) #37323 Thu Aug 3 04:38:46 CEST 2017
<4>[    0.000000] flash_size passed from bootloader = 8
<6>[    0.000000] bootconsole [early0] enabled
<6>[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
<6>[    0.000000] booting platform Atheros AR9132 rev 2 (0xb9)
<6>[    0.000000] Determined physical RAM map:
<6>[    0.000000]  memory: 02000000 @ 00000000 (usable)
<4>[    0.000000] Zone ranges:
<4>[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
<4>[    0.000000] Movable zone start for each node
<4>[    0.000000] Early memory node ranges
<4>[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
<7>[    0.000000] On node 0 totalpages: 8192
<7>[    0.000000] free_area_init_node: node 0, pgdat 802c2fc0, node_mem_map 8100
0000
<7>[    0.000000]   Normal zone: 64 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
<4>[    0.000000] Primary instruction cache 64kB, 4-way, VIPT, I-cache aliases,
linesize 32 bytes.
<4>[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize
32 bytes
<7>[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[    0.000000] pcpu-alloc: [0] 0
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total
pages: 8128
<5>[    0.000000] Kernel command line: console=ttyS0,115200 root=1f02 rootfstype
=squashfs noinitrd init=/sbin/init
<6>[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
<6>[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Writing ErrCtl register=00000000
<6>[    0.000000] Readback ErrCtl register=00000000
<6>[    0.000000] Memory: 29224k/32768k available (2150k kernel code, 3544k rese
rved, 371k data, 164k init, 0k highmem)
<6>[    0.000000] NR_IRQS:83
<0>[    0.000000] irq init done
<4>[    0.000000] plat_time_init: plat time init done
<6>[    0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
<6>[    0.080000] pid_max: default: 32768 minimum: 301
<6>[    0.080000] Mount-cache hash table entries: 512
<6>[    0.090000] NET: Registered protocol family 16
<4>[    0.100000] Can't analyze schedule() prologue at 80066e44
<6>[    0.120000] bio: create slab <bio-0> at 0
<6>[    0.120000] Switching to clocksource MIPS
<6>[    0.130000] NET: Registered protocol family 2
<6>[    0.130000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
<6>[    0.140000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
<6>[    0.150000] TCP: Hash tables configured (established 512 bind 512)
<6>[    0.150000] TCP: reno registered
<6>[    0.160000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.160000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[    0.170000] NET: Registered protocol family 1
<5>[    0.170000] gpio_proc: module loaded and /proc/gpio/ created
<6>[    0.180000] Register LED Device
<5>[    0.180000] wl0gpio_proc: module loaded and /proc/wl0gpio/ created
<4>[    0.190000] AR7100 GPIOC major 0
<6>[    0.190000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[    0.200000] msgmni has been set to 57
<6>[    0.200000] io scheduler noop registered
<6>[    0.210000] io scheduler deadline registered (default)
<6>[    0.210000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[    0.240000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 19) is a 16550A
<6>[    0.250000] console [ttyS0] enabled, bootconsole disabled
<0>[    0.260000] guessed flashsize = 8M
<0>[    0.260000] scanning for root partition
<0>[    0.270000] tplink uboot detected
<0>[    0.270000] bootloader size = 20000
<0>[    0.280000]
<0>[    0.280000] found squashfs at 102000
<5>[    0.280000] Creating 8 MTD partitions on "ar7100-nor0":
<5>[    0.290000] 0x000000000000-0x000000020000 : "RedBoot"
<5>[    0.300000] 0x000000020000-0x0000007e0000 : "linux"
<5>[    0.300000] 0x000000102000-0x0000007b0000 : "rootfs"
<4>[    0.310000] mtd: partition "rootfs" must either start or end on erase bloc
k boundary or be smaller than an erase block -- forcing read-only
<5>[    0.320000] mtd: partition "rootfs" set to be root filesystem
<5>[    0.330000] 0x0000007b0000-0x0000007e0000 : "ddwrt"
<5>[    0.330000] 0x0000007e0000-0x0000007f0000 : "nvram"
<5>[    0.340000] 0x0000007f0000-0x000000800000 : "FIS directory"
<5>[    0.350000] 0x0000007f0000-0x000000800000 : "board_config"
<5>[    0.350000] 0x000000000000-0x000000800000 : "fullflash"
<4>[    0.360000] ->Oops: flash id 0x10216 .
<6>[    0.370000] tun: Universal TUN/TAP device driver, 1.6
<6>[    0.370000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<4>[    0.380000] Found an RTL8366RB switch
<5>[    0.380000] Realtek RTL8366RB ethernet switch driver version 0.2.4
<6>[    0.500000] rtl8366rb rtl8366rb: using GPIO pins 18 (SDA) and 19 (SCK)
<6>[    0.500000] rtl8366rb rtl8366rb: RTL5937 ver. 3 chip found
<6>[    0.710000] libphy: rtl8366rb: probed
<6>[    0.910000] PPP generic driver version 2.4.2
<6>[    0.910000] PPP BSD Compression module registered
<6>[    0.920000] PPP Deflate Compression module registered
<6>[    0.920000] PPP MPPE Compression module registered
<6>[    0.930000] NET: Registered protocol family 24
<6>[    0.940000] u32 classifier
<6>[    0.940000]     Performance counters on
<6>[    0.950000]     input device check on
<6>[    0.950000]     Actions configured
<6>[    0.950000] Netfilter messages via NETLINK v0.30.
<6>[    0.960000] nf_conntrack version 0.5.0 (456 buckets, 1824 max)
<4>[    0.970000] nf_conntrack_rtsp v0.7 loading
<4>[    0.970000] nf_nat_rtsp v0.7 loading
<6>[    0.970000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    0.980000] TCP: westwood registered
<6>[    0.980000] TCP: hybla registered
<6>[    0.990000] TCP: vegas registered
<6>[    0.990000] NET: Registered protocol family 17
<5>[    0.990000] Bridge firewalling registered
<6>[    1.000000] 8021q: 802.1Q VLAN Support v1.8
<6>[    1.000000] searching for nvram
<6>[    1.010000] nvram size = 0
<6>[    1.040000] Atheros AR71xx hardware watchdog driver version 0.1.0
<6>[    1.050000] ar71xx-wdt: timeout=15 secs (max=21) ref freq=200000000
<6>[    1.060000] VFS: Mounted root (squashfs filesystem) readonly on device 31:
2.
<6>[    1.070000] Freeing unused kernel memory: 164K (802d7000 - 80300000)
<7>[    3.790000] ar71xx-wdt: enabling watchdog timer
<6>[    4.230000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
<7>[    4.530000] ar71xx: pll_reg 0xb8050014: 0x1a000000
<6>[    4.530000] eth0: link up (1000Mbps/Full duplex)
<6>[    4.750000] Loading modules backported from Linux version wt-2017-01-31-0-
ge882dff19e7f
<6>[    4.760000] Backport generated by backports.git backports-20160324-13-g24d
a7d3c
<7>[    5.610000] ath: EEPROM regdomain: 0x0
<7>[    5.610000] ath: EEPROM indicates default country code should be used
<7>[    5.610000] ath: doing EEPROM country->regdmn map search
<7>[    5.610000] ath: country maps to regdmn code: 0x3a
<7>[    5.610000] ath: Country alpha2 being used: US
<7>[    5.610000] ath: Regpair used: 0x3a
<7>[    5.660000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<6>[    5.660000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2133 RF Rev:a2 m
em=0xb80c0000, irq=2
<6>[    6.150000] usbcore: registered new interface driver usbfs
<6>[    6.160000] usbcore: registered new interface driver hub
<6>[    6.160000] usbcore: registered new device driver usb
<6>[    6.240000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    6.280000] ar71xx-ehci ar71xx-ehci.0: Atheros AR91xx built-in EHCI contro
ller
<6>[    6.290000] ar71xx-ehci ar71xx-ehci.0: new USB bus registered, assigned bu
s number 1
<6>[    6.330000] ar71xx-ehci ar71xx-ehci.0: irq 3, io mem 0x1b000000
<6>[    6.350000] ar71xx-ehci ar71xx-ehci.0: USB 2.0 started, EHCI 1.00
<6>[    6.350000] hub 1-0:1.0: USB hub found
<6>[    6.360000] hub 1-0:1.0: 1 port detected
<6>[    6.680000] usb 1-1: new high-speed USB device number 2 using ar71xx-ehci
<5>[    6.980000] SCSI subsystem initialized
<6>[    7.290000] usb-storage 1-1:1.0: USB Mass Storage device detected
<6>[    7.300000] scsi0 : usb-storage 1-1:1.0
<6>[    7.300000] usbcore: registered new interface driver usb-storage
<5>[    8.300000] scsi 0:0:0:0: Direct-Access     StoreJet Transcend        0
 PQ: 0 ANSI: 6
<5>[    8.310000] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB
/931 GiB)
<5>[    8.310000] sd 0:0:0:0: [sda] Write Protect is off
<7>[    8.320000] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
<5>[    8.320000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, d
oesn't support DPO or FUA
<6>[    9.420000] device br0 entered promiscuous mode
<6>[    9.490000] device vlan1 entered promiscuous mode
<6>[    9.500000] device eth0 entered promiscuous mode
<6>[    9.500000] br0: port 1(vlan1) entered forwarding state
<6>[    9.510000] br0: port 1(vlan1) entered forwarding state
<6>[    9.510000] device br0 left promiscuous mode
<6>[    9.520000] device br0 entered promiscuous mode
<6>[    9.540000] device br0 left promiscuous mode
<7>[    9.600000] ath: EEPROM regdomain: 0x8348
<7>[    9.600000] ath: EEPROM indicates we should expect a country code
<7>[    9.600000] ath: doing EEPROM country->regdmn map search
<7>[    9.600000] ath: country maps to regdmn code: 0x3a
<7>[    9.600000] ath: Country alpha2 being used: US
<7>[    9.600000] ath: Regpair used: 0x3a
<7>[    9.600000] ath: regdomain 0x8348 dynamically updated by user
<6>[   10.390000]  sda: sda1 sda2 sda3
<5>[   10.400000] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[   11.510000] br0: port 1(vlan1) entered forwarding state
<2>[   11.540000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   11.560000] EXT4-fs (sda2): no journal found
<6>[   11.730000] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsy
stem
<2>[   11.780000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   11.790000] EXT4-fs (sda2): no journal found
<6>[   11.800000] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsy
stem
<2>[   11.810000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   11.830000] EXT4-fs (sda2): no journal found
<2>[   11.840000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   11.850000] EXT4-fs (sda2): no journal found
<2>[   11.910000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   11.920000] EXT4-fs (sda2): no journal found
<6>[   12.130000] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsy
stem
<2>[   12.170000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   12.180000] EXT4-fs (sda2): no journal found
<6>[   12.190000] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsy
stem
<2>[   12.200000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   12.220000] EXT4-fs (sda2): no journal found
<2>[   12.230000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   12.240000] EXT4-fs (sda2): no journal found
<2>[   12.730000] EXT4-fs error (device sda3): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic 43f, entries 0, max 1088
(0), depth 0(0)
<3>[   12.740000] EXT4-fs (sda3): no journal found
<6>[   12.750000] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsy
stem
<2>[   12.830000] EXT4-fs error (device sda3): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic 43f, entries 0, max 1088
(0), depth 0(0)
<3>[   12.840000] EXT4-fs (sda3): no journal found
<3>[   12.850000] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompat
ibilities
<2>[   12.940000] EXT4-fs error (device sda3): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic 43f, entries 0, max 1088
(0), depth 0(0)
<3>[   12.950000] EXT4-fs (sda3): no journal found
root@DD-WRT:~#

_________________
linux drop
vasek00
DD-WRT Guru


Joined: 06 Nov 2010
Posts: 3227

PostPosted: Mon Dec 11, 2017 6:40    Post subject: Reply with quote
hdv wrote:

Code:

<6>[   10.390000]  sda: sda1 sda2 sda3
<5>[   10.400000] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[   11.510000] br0: port 1(vlan1) entered forwarding state
<2>[   11.540000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   11.560000] EXT4-fs (sda2): no journal found
<6>[   11.730000] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsy
stem
<2>[   11.780000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   11.790000] EXT4-fs (sda2): no journal found
<6>[   11.800000] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsy
stem
<2>[   11.810000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   11.830000] EXT4-fs (sda2): no journal found
<2>[   11.840000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   11.850000] EXT4-fs (sda2): no journal found
<2>[   11.910000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   11.920000] EXT4-fs (sda2): no journal found
<6>[   12.130000] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsy
stem
<2>[   12.170000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   12.180000] EXT4-fs (sda2): no journal found
<6>[   12.190000] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsy
stem
<2>[   12.200000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   12.220000] EXT4-fs (sda2): no journal found
<2>[   12.230000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[   12.240000] EXT4-fs (sda2): no journal found
<2>[   12.730000] EXT4-fs error (device sda3): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic 43f, entries 0, max 1088
(0), depth 0(0)
<3>[   12.740000] EXT4-fs (sda3): no journal found
<6>[   12.750000] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsy
stem
<2>[   12.830000] EXT4-fs error (device sda3): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic 43f, entries 0, max 1088
(0), depth 0(0)
<3>[   12.840000] EXT4-fs (sda3): no journal found
<3>[   12.850000] EXT4-fs (sda3): couldn't mount as ext2 due to feature incompat
ibilities
<2>[   12.940000] EXT4-fs error (device sda3): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic 43f, entries 0, max 1088
(0), depth 0(0)
<3>[   12.950000] EXT4-fs (sda3): no journal found
root@DD-WRT:~#

Думаю разберетесь, что и как, разделы sd1/sd2/sd3, Ext4 файловая система. Ваша Ext3 и "no journal found/couldn't mount as ext2 due to feature incompat
ibilities"
hdv
DD-WRT Novice


Joined: 26 Nov 2017
Posts: 24

PostPosted: Mon Dec 11, 2017 7:20    Post subject: Reply with quote
на предыдущей прошивке все было норм. диск отформатирован в ext3 веб-морда показывает тоже самое.

пробовал смотреть
cat /proc/filesystem

выдает что поддержка ext3 включена.
что ему не понравилось на этой прошивке?
почему он пытается ext3 монтировать как ext4?
не факт что разберусь. пока видится только одно, опять переформатировать винт, может побилось что?
форматировал при помощи
MiniTool Partition Wizard Free

_________________
linux drop
vasek00
DD-WRT Guru


Joined: 06 Nov 2010
Posts: 3227

PostPosted: Tue Dec 12, 2017 9:19    Post subject: Reply with quote
hdv wrote:
на предыдущей прошивке все было норм. диск отформатирован в ext3 веб-морда показывает тоже самое.

пробовал смотреть
cat /proc/filesystem

выдает что поддержка ext3 включена.
что ему не понравилось на этой прошивке?
почему он пытается ext3 монтировать как ext4?
не факт что разберусь. пока видится только одно, опять переформатировать винт, может побилось что?
форматировал при помощи
MiniTool Partition Wizard Free

Речь не о том, что было, а о том что есть.
Он не пытается, а ГОВОРИТ
Quote:
<2>[ 11.540000] EXT4-fs error (device sda2): ext4_ext_check_inode:489: inode #
8: comm mount: bad header/extent: invalid magic - magic fd, entries 0, max 254(0
), depth 0(0)
<3>[ 11.560000] EXT4-fs (sda2): no journal found
<6>[ 11.730000] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsy
stem

В этой же программе и отформатируйте в ext4, хотя зачем в ней млжно и в NTFS (пакетов optware если не будет), а вы как хотели чтоб 1TB диск за 5минут переделать. Не хотите время тратить - возьмите flash размером 4GB и на ней попробуйте.
hdv
DD-WRT Novice


Joined: 26 Nov 2017
Posts: 24

PostPosted: Tue Dec 12, 2017 11:27    Post subject: Reply with quote
vasek00 wrote:
Не хотите время тратить - возьмите flash размером 4GB и на ней попробуйте.

так и хочу сделать. сначала потренируюсь на флешке )
спасибо.

_________________
linux drop
Goto page Previous  1, 2, 3 Display posts from previous:    Page 3 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Оборудование на основе Atheros WiSOC All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum