Posted: Wed Jan 03, 2018 7:25 Post subject: Different network speed on separated vlans
I am running the latest firmware dd-wrt.v24_mega_wrt610n_r34311.bin on wrt610n v1 from the k26 folder. I have separated vlan3/port4 with a separate subnet, 192.168.30.1 while the others vlan1,2 (port 1, 2,3) and WAN port as a switch on br0, the repeater bridge through 5 ghz radio. I have also configured 2.4 ghz radio as separate subnet 192.168.20.1 for guest network. I am running a startup command:
Everything is working fine. I can connect the guest ssid on 2.4 ghz and get connection speed of 60 mbps. My pc connected through port 2 by gigabyte ethernet, vlan1, gets the connection speed of 110 mpbs. However, when I connect pc though port 4 (vlan3, which is on a separate subnet), I get connection speed of 60 mpbs.
Why is the connection speed on separated vlan3 on a different subnet on port 4, lower than the speed on port 1 to 3 ? Do I need to change my firewall script?
Joined: 16 Nov 2015 Posts: 6410 Location: UK, London, just across the river..
Posted: Wed Jan 03, 2018 11:33 Post subject:
i guess it might be a CPU related issue this router is an old blow from the past and with 300Mhz CPU that what its capable of for better speed you need better router especially for Gigabit speed you'd need a serious device in range of Netgear R7000 or R7800(it has different Vlan control) _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Alozaros: Thanks for the reply. Before I go ahead and buy another router, I want to confirm that the issue is really the cpu and not the firmware or the settings. Can you or someone else confirm and help with these questions:
1) Are the commands in starter and firewall scripts ok, and have nothing to do with forwarding packets from device connected to vlan3 on a different subnet to main repeater bridge bro on 5 gz netowrk?
2) I don't understand why the device connected to vlan1 that directly communicated through br0 has higher speed than when I take the ethernet plug out and plug in port4/vlan3 on a different subnet? How does the packets from this subnet get transferred to the main internet router?
3) When I updated the firmware from an older 14929 kernel 2.4 based, to latest 34111 based on kernel 2.6, I saw triple the wl0 speed on 2.4 ghz AP from 17 to 50 mbps, and repeater bridge on 5 ghz increase from 80 mpbps to 140 mpbps. So obviously, it is not just the cpu, firmware and settings has also a role.
I appreciate any comments or suggestions. At the end of the day, one of the reason I experiment with dd-wrt is to learn. So just going to buy another router will defeat that purpose.
Joined: 16 Nov 2015 Posts: 6410 Location: UK, London, just across the river..
Posted: Thu Jan 04, 2018 8:30 Post subject:
the last updates have SFE this is a forward engine that speeds up the packets and increases speed it kind of
hardware acceleration... and its turned on by default
check basic set up>Optional Settings>SFE _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Joined: 18 Mar 2014 Posts: 12837 Location: Netherlands
Posted: Thu Jan 04, 2018 8:59 Post subject:
I do not think the K2.6 has SFE, besides SFE only speeds WAN throughput.
Problem might well be the CPU, port 1 to 3 are just switched by the router fabric, port 4 is separated and is handled by the the CPU by means of ebtables (routing of layer 2).
In the past there have been bugs in ebtables in BS builds, I do not know if these are resolved.