Your reports for Broadcom units are greatly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 29440_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ Unofficial Kong's release repository : http://ddwrt-kong.clonevince.fr/
Router: Asus RT-AC56U
Firmware: DD-WRT v3.0-r34320M kongac (01/03/1
Kernel: Linux 4.4.109-rc1 #482 SMP Wed Jan 3 15:42:11 CET 2018 armv7l
Status: OK
Reset: NO
Errors: NONE
Router: Asus RT-A68U
Firmware: DD-WRT v3.0-r34320M
Kernel: Linux 4.4.109-rc1 #482 SMP Wed Jan 3 15:42:11 CET 2018 armv7l
Status: OK
Reset: NO
on for 9 hours
Errors: on 5Ghz network
Transmitted (TX)1057067 OK, 32558 errors
I did lose 5Ghz wifi this morning for 10 sec.
I thought softether vpn was added back, I cannot see the menu under vpn.
Thank you kong and brainslayer for the hard work. _________________ Netgear R9000 main router
RAX80 as AP
Joined: 18 Mar 2014 Posts: 12904 Location: Netherlands
Posted: Thu Jan 04, 2018 14:29 Post subject:
Router Model: Netgear R6400
Firmware Version: DD-WRT v3.0-r34320M kongac (01/03/1
Kernel Version: Linux 4.4.109-rc1 #482 SMP Wed Jan 3 15:42:11 CET 2018 armv7l
Upgraded: from DD-WRT v3.0-r34015M kongac (12/09/17) via ddup --flash-latest
Reset: No not this time
Status: Up and running for 4 hours, basic setup as AP, static leases, OpenVPN client (on PIA) with PBR up and running, 2,4GHz, 5Ghz USB storage and DLNA working.
Errors: Yes, OpenVPN with Policy Based Routing does not forward HTTP(s) traffic to the PBR clients with SFE on see: http://svn.dd-wrt.com/ticket/5900.
The GUI sometimes does not respond and I have to manually refresh this was also the case in 33630.
Router: Netgear R7000
Firmware: DD-WRT v3.0-r34320M kongac (3 Jan 2018 )
Kernel: Linux 4.4.109-rc1 #482 SMP Wed Jan 3 15:42:11 CET 2018 armv7l
Status: Working
Reset: No
Previous: 34015M
Errors: No
CPU Temperature : 50.8 °C / WL0 43.8 °C / WL1 45.3 °C
Working very well :
Router mode : DHCP
STP Disable
DNSMasq
Encrypt DNS
Cache DNSSEC data
Validate DNS Replies (DNSSEC)
Local DNS
No DNS Rebind
Query DNS in Strict Order
SPI Firewall
Usb
Nas, Samba, JFFS2, miniDLNA,
MAC Filter
wl0, wl1
Vpn (OpenVPN Client)
Kong and BS: Thanks for all your good work!
without VPN
with VPN
Last edited by Bernadoe on Sat Jan 06, 2018 8:35; edited 2 times in total
Router: Netgear AC1450
Firmware: DD-WRT v3.0-r34320M kongac (3 Jan 2018 )
Kernel: Linux 4.4.109-rc1 #482 SMP Wed Jan 3 15:42:11 CET 2018 armv7l
Status: bricked
Reset: No
Previous: unknown 33770?
Errors: Bricked
performed ddup --flash-latest the cycle completed but nothing but flashing power button. Powercycle does nothing. Seem to be unable to Reset as it changes nothing
edit: flash to factory didn't fix it the flash worked and the router lights came back but the webpage was never accessible. another power cycle 30 min resulted in a brief flash of the power light the nothing. The netgear light displays and a cable plugged into wan port lights up that indicator but power light never remains on and the router can be pinged at 192.168.1.1.
I'm mistaken the power light never comes on its the wan light that briefly flashes.
Last edited by Nuor on Thu Jan 04, 2018 22:09; edited 2 times in total
Router: Netgear R7000
Firmware: DD-WRT v3.0-r34320M kongac
Kernel: 4.4.109-rc1
update: 34015 (>21 days of uptime) --> 34320
status: operational
reset: no
errors: none so far
My setup is very simple: 2.4 GHz only + some physically connected via unmanaged switch + QoS for buffer bloat (WTB/FQ_CODEL). No USB, no VPN, no entware, etc.
Will post back to update after a few days.
EDIT:
uptime: 13 days, 15:38
Received (RX) 3,496,562 OK, no error
Transmitted (TX) 5,394,521 OK, no error
Last edited by thunderhead on Sun Jan 21, 2018 14:42; edited 5 times in total
Joined: 18 Feb 2007 Posts: 87 Location: Bern, Switzerland
Posted: Thu Jan 04, 2018 22:57 Post subject: Buffalo WZR-1750DHCP
Router: Buffalo WZR-1750DHCP
Firmware: DD-WRT v3.0-r34320M kongac (01/03/18 )
Kernel: Linux 4.4.109-rc1 #482 SMP Wed Jan 3 15:42:11 CET 2018 armv7l
Status: Up and running
Reset: No
Errors: Like with 34015M, Mobile Broadband isn't working anymore