|
|
| Author |
Message |
MastaRain
DD-WRT Novice
Joined: 21 Aug 2015
Posts: 36
|
 Posted: Tue Feb 06, 2018 3:11 Post subject: High load average - ebtables |
 |
I noticed Load average: 4.99 5.02 5.00 on the router
Quite unusual. Especially there is no one on the network.
So I made a top command and got the following.
Any clue? Thanks
R7000 on Firmware: DD-WRT v3.0-r33986 std (12/04/17)
| Code: |
Mem: 49320K used, 205268K free, 0K shrd, 5296K buff, 14492K cached
CPU: 99.8% usr 0.0% sys 0.0% nic 0.0% idle 0.0% io 0.0% irq 0.1% sirq
Load average: 4.99 5.02 5.00 6/140 20478
PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND
6782 6781 root R 764 0.3 1 20.2 /usr/sbin/ebtables -t nat -D POSTROUTING -o tap2 --pkttype-type multicast -j DROP
7488 7487 root R 764 0.3 0 20.1 /usr/sbin/ebtables -t nat -D POSTROUTING -o tap2 --pkttype-type multicast -j DROP
9455 9454 root R 764 0.3 1 19.9 /usr/sbin/ebtables -t nat -D POSTROUTING -o tap2 --pkttype-type multicast -j DROP
5730 5729 root R 764 0.3 0 19.5 /usr/sbin/ebtables -t nat -D POSTROUTING -o tap2 --pkttype-type multicast -j DROP
1377 1376 root R 764 0.3 0 19.3 /usr/sbin/ebtables -t nat -D POSTROUTING -o tap2 --pkttype-type multicast -j DROP |
|
|
| Back to top |
 
|
 |
Sponsor
|
|
|
jwh7
DD-WRT Guru
Joined: 25 Oct 2013
Posts: 2670
Location: Indy
|
| Posted: Tue Feb 06, 2018 3:26 Post subject: Re: High load average - ebtables |
|
| MastaRain wrote: | PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND
6782 6781 root R 764 0.3 1 20.2 /usr/sbin/ebtables -t nat -D POSTROUTING -o tap2 --pkttype-type multicast -j DROP
7488 7487 root R 764 0.3 0 20.1 /usr/sbin/ebtables -t nat -D POSTROUTING -o tap2 --pkttype-type multicast -j DROP
9455 9454 root R 764 0.3 1 19.9 /usr/sbin/ebtables -t nat -D POSTROUTING -o tap2 --pkttype-type multicast -j DROP
5730 5729 root R 764 0.3 0 19.5 /usr/sbin/ebtables -t nat -D POSTROUTING -o tap2 --pkttype-type multicast -j DROP
1377 1376 root R 764 0.3 0 19.3 /usr/sbin/ebtables -t nat -D POSTROUTING -o tap2 --pkttype-type multicast -j DROP |
http://svn.dd-wrt.com/ticket/5502
http://svn.dd-wrt.com/ticket/5807
https://www.dd-wrt.com/phpBB2/viewtopic.php?t=308120&highlight=ebtables&start=15
_________________
# NAT/SFE/CTF: limited speed w/ DD # Repeater issues # DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo #
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4 |
|
| Back to top |
|
|
MastaRain
DD-WRT Novice
Joined: 21 Aug 2015
Posts: 36
|
| Posted: Tue Feb 06, 2018 3:38 Post subject: |
|
Thanks. But from the Reading Kong said it was fixed in November. My build seems newer.
not sure from your links if this is fixed or not, and not so clear as to what needs to be done.
Thanks for your followup. |
|
| Back to top |
|
|
egc
DD-WRT Guru
Joined: 18 Mar 2014
Posts: 12917
Location: Netherlands
|
| Posted: Tue Feb 06, 2018 8:58 Post subject: |
|
It is fixed in Kong's builds, so use builds from him:
http://www.desipro.de/ddwrt/K3-AC-Arm/TEST/
reset to defaults by doing: "erase nvram" from the command prompt after uploading the new build
_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087 |
|
| Back to top |
|
|
|
