maybe if cns3xxx is something used in r7800, but it looks like a ethernet driver for something else
edit: no just tried it, all k4.x issues remain, qos/latency/cpu load
stalonge wrote:
No news in a week ?
probably cause theres nothing to report, considering the same load issue is in lede/openwrt as well, and they supposedly have "good" qos compared to us, should mean this problem runs deep in this broken kernel
Problem with this bug is, that 32bit arm has no nmi support, therefore the code that causes the load is hidden behind a standard kernel function that restores irqs.
Thus can't really debug it.
But I do have a hint now, might be broken pcie code for ipq.
maybe broken active state power management if we utilize it? aspm can do all sorts of dirty shit when improper
PCIe issue is fixed with dissents latest patches, but this does not affect throughput.
Anyways, there is something wrong with the new scaling code.
to max supported freq and you will see a dramatic increase in performance. Have not looked into the scaling code yet, just noticed this strange issue, when I compared the indicidual ipq units.
Joined: 28 Dec 2017 Posts: 2 Location: Graz, Austria
Posted: Sun Feb 04, 2018 13:14 Post subject:
tatsuya46 wrote:
look at EdgeOS, drool worthy qos user options)
Was a not favourable hint Bought a Router from Ubi and now i´m really happy. Really good stuff. R7800 is on his way to a new owner. Thanks this forum for some good informations and support finally
Joined: 16 Nov 2015 Posts: 6447 Location: UK, London, just across the river..
Posted: Wed Feb 07, 2018 6:28 Post subject:
i ve noticed my R7800 has a kind of delay/latency on
online test's and few smart phones but barely noticeable on PC's or any other devices...it goes away on router restart and builds up in a day or two...
I believe its very ISP dependant cause it works great on my PPPoE connection...no latency or so,
sadly i had very limited time to test it but i ll do some other tests with different ISP soon... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Wed Feb 07, 2018 6:51; edited 1 time in total
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Wed Feb 07, 2018 23:38 Post subject:
i dont know, maybe, kong tried up to 16mb before but did nothing, but 16mb isnt 32mb. or the order of the list might mean something _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
Joined: 21 Jul 2006 Posts: 1898 Location: Fortaleza Ce Brazil
Posted: Tue Feb 13, 2018 12:58 Post subject:
CPU
CPU Model
QCA IPQ806X
CPU Cores
2
CPU Features
VFP VFPv4 NEON EDSP
CPU Clock
800 MHz / 800 MHz
Load Average
1%
0.01, 0.04, 0.00
CPU Temperature
CPU 54.0 °C / ath0 55 °C
Fortaleza's Temperature 29 Censius
_________________ DDwrt ...it rocks ....
1 R7800 54420 AP Wireguard webserver JFFS SAMBA FTP usb HD Mesh
1 R7800 54420 Cli Mesh
1 WZR1750 54389 AP Webserver Samba Wireguard
1 TP link Archer C7v5 54420 Cli Mesh
1 DD x86_64 48296 Gateway Samba Ftp Webserver
Joined: 30 Jan 2015 Posts: 676 Location: Texas, USA
Posted: Wed Feb 14, 2018 1:46 Post subject:
stalonge wrote:
CPU
CPU Model
QCA IPQ806X
CPU Cores
2
CPU Features
VFP VFPv4 NEON EDSP
CPU Clock
800 MHz / 800 MHz
Load Average
1%
0.01, 0.04, 0.00
CPU Temperature
CPU 54.0 °C / ath0 55 °C
Fortaleza's Temperature 29 Censius
Stalonge,
In your signature, you have mentioned that you have a working R8500 in repeater bridge mode:
1 R8500 34900 Kac RB
Do you have this configuration working still? If you could you please pm or post the settings of the wireless radios?
I have issues in setting the R8500 as RB. As soon as I set the wireless in RB mode the router is on boot loop .
Thanks, _________________ ASUS GT-BE98 PRO Main: Fiber 5gbps up/down
ASUS AXE16000: AI Mesh node
2 X ASUS RT-AX89X: AI Mesh nodes
QNAP QSW-1208-8C 12-Port 10GbE Switch
XS712T ProSafe 12-Port 10GbE Switch
3 X R9000 DD-WRT Mesh
People over at OpenWRT/LEDE are saying Brainslayer's WiFi LED patch does work for 5GHz, but not for 2.4GHz.
The relevant OpenWRT/LEDE patch they are using: https://gist.github.com/hnyman/f4b1634613f994cc6afa6111aaf8b47e _________________ -NETGEAR X4S R7800
-ARRIS SURFboard SB8200
---
Defunct:
-WRT1900ACv1 @ r31100M kongmv
Retired due to lackluster mac80211 driver development
-Cisco DPC3008