EnGenius 9850

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Senao Devices
Goto page Previous  1, 2, 3 ... 15, 16, 17
Author Message
zendoboi
DD-WRT Novice


Joined: 08 Dec 2012
Posts: 1

PostPosted: Sat Dec 08, 2012 7:43    Post subject: Reply with quote
Kroligoff wrote:
I make again special version of Firmware for ESR9850

+Enabled Telnet
+Enabled hidden settings (bridge lan , etc)

Wink

===========
utelnet started only for br0 (lan+wifi) interface,but not for WAN
and used port 25

example: telnet 192.168.xx.1 25

============================================

There are some hidden commands:

Settings Bridge:
xx.xx.xxx.xx/bridgelan.htm LAN Port Birdging and MAC Address Bridging Settings

Monitor:
xx.xxx.xx.xx/stasmonitor.htm Monitor WAN and WLAN Bandwidth

Mutlicast Settings:
http://xx.xx.xx.xx/wanadv.htm

Advanced Firewall Settings:
xx.xx.xx.xx/fwadv.htm

Advanced WMM Settings:
xx.xx.xx.xx/wlwmm.htm



Updated your firmware but i'm still not able to telnet into the device...
Sponsor
Kroligoff
DD-WRT Novice


Joined: 30 Nov 2010
Posts: 7

PostPosted: Wed Jan 16, 2013 7:20    Post subject: Reply with quote
telnet port not default, need use 25
YoungJules
DD-WRT Novice


Joined: 21 Mar 2013
Posts: 1

PostPosted: Thu Mar 21, 2013 23:16    Post subject: Reply with quote
After wading through all 17 pages here, I felt a real sense of disappointment at the end that all that effort seems to have come to nothing. I'm using a Sitecom WL-351 myself and would really have appreciated a dd-wrt build to fix some of the bigger holes in the official firmware.
One problem I have is that the firmware won't allow me to hard-code a WAN address... without some bizarre message that the ip address is invalid because it's not on the same subnet as the "current" one (whatever current means!). I have the LAN address set to 192.168.1.3 (we have a rather odd network setup with some parts controlled by our ISP) but the WAN address seems to default to 172.1.1.1 (our own external address is nothing like that and none of our internal addresses for gateway, DNS or anything else look anything like that!).
I also can't get the router to forward incoming traffic correctly (although this might be something in the setup of the equipment our ISP supplies and controls...). Whatever, I can't ssh to the office from home anymore! Sad

I was thinking of giving the fw uploaded by Kroligoff a try (thanks Kroligoff!) but am guessing I'd need to tweak bytes 6 and 7 (or 7 and 8, depending whether you start counting from 0 or 1)? Does anyone have any positive experience with this firmware on the Sitecom-badged device?

Thanks in advance for all help, information, tips... Smile
Dukenukemx
DD-WRT Novice


Joined: 26 Jan 2008
Posts: 13

PostPosted: Tue Nov 19, 2013 22:09    Post subject: Reply with quote
Kroligoff wrote:
I make again special version of Firmware for ESR9850

+Enabled Telnet
+Enabled hidden settings (bridge lan , etc)

Wink

===========
utelnet started only for br0 (lan+wifi) interface,but not for WAN
and used port 25

example: telnet 192.168.xx.1 25

============================================

There are some hidden commands:

Settings Bridge:
xx.xx.xxx.xx/bridgelan.htm LAN Port Birdging and MAC Address Bridging Settings

Monitor:
xx.xxx.xx.xx/stasmonitor.htm Monitor WAN and WLAN Bandwidth

Mutlicast Settings:
http://xx.xx.xx.xx/wanadv.htm

Advanced Firewall Settings:
xx.xx.xx.xx/fwadv.htm

Advanced WMM Settings:
xx.xx.xx.xx/wlwmm.htm


Anyone give any feedback on how this firmware works? Any bugs, any updates?
chateau
DD-WRT User


Joined: 20 Aug 2010
Posts: 104

PostPosted: Tue Feb 18, 2014 2:13    Post subject: Reply with quote
Kroligoff wrote:
I make again special version of Firmware for ESR9850

+Enabled Telnet
+Enabled hidden settings (bridge lan , etc)


===========
utelnet started only for br0 (lan+wifi) interface,but not for WAN
and used port 25

example: telnet 192.168.xx.1 25


I tried this firmware on my ESR-9850 that was recently retired from service.

Can't get telnet to work. Port 25 is not open per a port scan. Can see the hidden commands from web interface.
Anybody else had any luck with it?
============================================
fräs
DD-WRT Novice


Joined: 07 Sep 2010
Posts: 1

PostPosted: Tue Aug 05, 2014 22:29    Post subject: Dead thread, live router - with a twist Reply with quote
While DD-WRT seems to be a no-go with this router, the thing (in the guise of a Sitecom WLR-4000 v1.001) happily runs OpenWRT here. While not a turn-key install like DD-WRT (especially for this router, as the default OpenWRT install needs to be changed to get it to work) the result is a lot more versatile - just install what you want, leave what you don't need, edit config files by hand or through one of the web interfaces, etc. No need for optware, no need to fight the web interface.

More info on the 'default install': http://wiki.openwrt.org/toh/sitecom/wl-351

More info on what you need to do to get it to work on this router: https://forum.openwrt.org/viewtopic.php?id=40150

I used the most recent release, it ´works for me' (after getting it to work, that is). Have some stock firmware around in case it doesn't work for you.
reynard80
DD-WRT Novice


Joined: 13 Nov 2015
Posts: 2

PostPosted: Sat Nov 14, 2015 10:13    Post subject: Re: Dead thread, live router - with a twist Reply with quote
fräs wrote:
While DD-WRT seems to be a no-go with this router, the thing (in the guise of a Sitecom WLR-4000 v1.001) happily runs OpenWRT here. While not a turn-key install like DD-WRT (especially for this router, as the default OpenWRT install needs to be changed to get it to work) the result is a lot more versatile - just install what you want, leave what you don't need, edit config files by hand or through one of the web interfaces, etc. No need for optware, no need to fight the web interface.

More info on the 'default install': http://wiki.openwrt.org/toh/sitecom/wl-351

More info on what you need to do to get it to work on this router: https://forum.openwrt.org/viewtopic.php?id=40150

I used the most recent release, it ´works for me' (after getting it to work, that is). Have some stock firmware around in case it doesn't work for you.


Old post, but I'm working on my old 351 again.. I have a question: how to flash the stock firmware back? (two dlf files)
jackes
DD-WRT Novice


Joined: 13 Feb 2016
Posts: 2

PostPosted: Sat Feb 13, 2016 3:40    Post subject: Re:everyone Reply with quote
Why dd-wrt users need this? thanks!

Morgan2Melman wrote:
You will need this cellular jammers someday.
fizikz
DD-WRT User


Joined: 10 Nov 2016
Posts: 78

PostPosted: Mon Nov 14, 2016 2:00    Post subject: Reply with quote
Any chance of ever getting ddwrt for the ESR9850? Or is this a lost cause?
fizikz
DD-WRT User


Joined: 10 Nov 2016
Posts: 78

PostPosted: Mon Oct 16, 2017 21:38    Post subject: Reply with quote
Still no support for the ESR9850 from dd-wrt.

What is the status of alternatives?
OpenWrt seemed possible but iffy in this thread.
Gargoyle?
LEDE lists support now: https://lede-project.org/toh/hwdata/engenius/engenius_esr9850
EthanThompson
DD-WRT Novice


Joined: 17 Nov 2017
Posts: 5

PostPosted: Fri Nov 17, 2017 10:41    Post subject: Reply with quote
Hi,
Just to add that, as one of the donators, I am really disappointed with how things have played out with this router.
fizikz
DD-WRT User


Joined: 10 Nov 2016
Posts: 78

PostPosted: Fri Nov 17, 2017 19:34    Post subject: Reply with quote
@EthanThompson Yes, quite disappointed. I bought the ESR9850 due to the great review on SmallNetBuilder. In the future, I will buy only those devices with good, existing 3rd party firmware support. Tired of waiting..

Any attempts with LEDE or others?
Erickem
DD-WRT Novice


Joined: 07 Feb 2018
Posts: 3

PostPosted: Wed Feb 07, 2018 7:58    Post subject: Reply with quote
any updates? Embarassed

_____________

My website: thêu lông mày có thay đổi tướng số


Last edited by Erickem on Tue Apr 10, 2018 7:55; edited 1 time in total
fizikz
DD-WRT User


Joined: 10 Nov 2016
Posts: 78

PostPosted: Thu Feb 08, 2018 21:02    Post subject: Reply with quote
Erickem wrote:
any updates? Embarassed


None whatsoever. I've given up on it and moved on to a Netgear R7000.
Goto page Previous  1, 2, 3 ... 15, 16, 17 Display posts from previous:    Page 17 of 17
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum