Posted: Thu Feb 15, 2018 22:16 Post subject: Re: WNDR4500v2 and F7D8302
<Kong> wrote:
Do not overclock your cpu.
I have my CPu OCed to 1200mhz and it is fine with other builds i even erased nvram and reset the CPU for this build and it still locked up after an hour.
What is the issue with OCing the CPU?....just asking.
Router/Version: Linksys E3200
Firmware: DD-WRT v3.0-r34929 mega (02/12/1 (dd-wrt.v24-34929_NEWD-2_K2.6_mega-nv60k.bin)
Kernel: K2.6
Previous: DD-WRT v3.0-r33555 mega (10/20/17)
Mode/Status: Repeater / Not working with WPA2 AES. Works only with WEP or no encryption.
Reset:
Issues/Errors: Not working with WPA2 AES. Works only with WEP or no encryption. See full comment and test results in http://svn.dd-wrt.com/ticket/2253
Router/Version: Netgear R7000
Firmware: v3.0-r34929 std ( 02/12/18 )
Kernel: Linux 4.4.115 #2593 SMP Sat Feb 10 09:57:20 CET 2018 armv7l
Previous: r34777
Mode/Status: Gateway
Reset: No
Issues/Errors: Freezes after +11 hours and dtdns still not work.
Updated:
I have disabled: Shortcut Forwarding Engine
Now the R7000 is up for 2 days 15 hours.
Second update:
Even with SFE disable the router freezes after 3 days. _________________ Regards,
Vaako
1x Netgear R7800 Nighthawk - firmware not decided yet !!!!
1x Netgear R7000 Nighthawk r36410
1x Ubiquiti RouterStation Pro DD-WRT r23204 std (12/24/13)
1x Asus RT-N16 SVN revision 20675 NEWD-2 K2.6
1x Linksys E4200 v3.0 r34777 mega (01/31/18 )
1x Buffalo WZR-HP-G300NH B0 B0 Gargoyle FW
1x Linksys WRT600N v1.1 (Bricked)
1x Linksys WRT54GL v1.1 (DD-WRT 26446)
1x Linksys WRT54GS v2.2 (DD-WRT 26446)
1x Linksys RVS4000 (stock fw)
3x D-Link DWL-7100AP (openWRT)
2x TP-Link TL-WA801ND (Bridge mode) 100mW TX-Power
Asus WL-520GU SVN 16403M NEWD-2 Eko std-nokaid
4x Fonera with Gargoyle FW
Last edited by Vaako on Wed Feb 21, 2018 17:20; edited 2 times in total
This build is of such high quality and great results perhaps it should be "the" v34 release. Setting a new baseline in the process. _________________ Location (urban) - 1x Linksys EA8500 (AP wlan0 & wlan1 enabled)
1x Asus 68u (Repeater Bridge w/VAP) - wl0 disabled
1x Asus 87u (Client Bridge) - wl1 disabled
Router/Version: Linksys E3000
Firmware: dd-wrt.v24-34929_NEWD-2_K3.x_mega-e3000.bin
Kernel: Linux 3.10.108-dd #17736 Mon Feb 12 15:30:43 CET 2018 mips
Previous: dd-wrt.v24-33555_NEWD-2_K3.x_mega-e3000.bin
Mode/Status: Client bridge on 5Ghz, Ap on 2.4Ghz
Reset: Yes
Issues/Errors: Wifi is unstable, internet cuts, back to build 33555
Posted: Sun Feb 18, 2018 2:43 Post subject: 34939M
Router Name R7000
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r34929 std (02/12/1
Kernel Version Linux 4.4.115 #2593 SMP Sat Feb 10 09:57:20 CET 2018 armv7l
Update 34900M
Reset Yes
OpenVPN,Samba,MiniDLNA
Media Center still won't appear on various connected devices
OpenVPN wouldn't work until mtu-disc yes & proto udp4 were added to VPN Additional Config
Speed increased exponentially after removing Server IP/Name from Time Settings
Screenshot-2018-2-17 Frontier Internet Speed Test Tool.png
Joined: 19 Feb 2018 Posts: 6 Location: Rocky Mountains
Posted: Mon Feb 19, 2018 2:40 Post subject: RE: DIR-880L running Build 34929 (BS): 02-12-2018-r34929
Was forced to use r30432 due to DIR-880L boot loop until r34093 was released. Thanks to quarkysg detective work, Daniel M. nudging BS for quarkysg 1 line chg and of course BS for all his great work.
Router/Version: DLink DIR-880L/A1 Firmware: R34929 Kernel: 4.4.115 #2593 SMP Sat Feb 10 09:57:20 CET 2018 armv7l DD-WRT Previous: DD-WRT R34311 Mode/Status: AP 2.4 and 5 GHz/working much better than previous 2018 dd-wrt versions since 5 GHz no longer drops/fails to connect on linux laptop w/4.14.18 kernel Reset: No Issues/Errors: 1st attempt to upgrade f/w timed out and was left at R34311. powered off/on and 2nd R34929 upgrade attempt worked. No significant errors found after 22 Hours.
2.4 and 5 GHz WiFi solid on linux laptop finally! Linux WiFi not reliable before R34929. win 10 on same laptop and android devices worked on all BS 2018 dd-wrt versions tried prior to R34929.
DHCP seems to be working reliably.
time.nist.gov stopped working: ntpclient[9756]: Failed connecting to time.nist.gov [2610:20:6f96:96::4]: Address family not supported by protocol. I am not running IPV6. https://tf.nist.gov/tf-cgi/servers.cgi shows a IPV6 only server in the time.nist.gov dns rotation. The NIST egg heads didnt think this through. I left time server field blank, ntp seems to work fine.
Several RB's behind this AP and they have more reliable connectivity as well. Have SFE enabled and seeing 15-20 Mb/s improvement. No VPN or port forwarding in use.
Router/Version: TP-Link Archer C9 v1
Firmware: DD-WRT v3.0-r34929 std
Kernel: Linux 4.4.115 #2595 SMP Mon Feb 12 09:40:43 CET 2018 armv7l
Previous: r33375
Mode/Status: Router/AP/NAS
Reset: No
Issues/Errors: None but USB 3.0 have only 25MB/s up or down (using 1 gbps cable)
Router/Version: Buffalo WZR-1750DHP
Firmware: DD-WRT v3.0-r34929
Kernel: Linux 4.4.115 #2593 SMP Sat Feb 10 09:57:20 CET 2018 armv7l
Previous: 34080
Mode: Router (No Gateway Mode)
Reset: No
Issues/Errors: Routing does make some trouble, cannot use multipathing anymore. Either when using zebra / ospfd or try to configure the routes static, only one route per destination is accepted. When i try to configure multiple default gw with static routes by using
Code:
ip route add default proto static nexthop via <ip-gw1> dev vlan1 nexthop via <ip-gw2> dev vlan2 table 2
I get the error message:
ip: either "to" is duplicate, or "nexthop" is garbage
Table 2 ends up without any default route. Reverting back to 34080 fixes this issue.
Router/Version: Belkin F7D4302
Firmware:r34929
Kernel:3.10.108-dd
Previous:Tomato
Mode:Wifi-Router/Gateway
Reset:Before and after
Issues/Errors: Receiving errors in syslog about ntp server but it will correct itself, Using fq_codel/codel still unusable i setup with htb or hfsc, but i'm using hfsc/fq_codel the ingress works if you set to 0, egress worked using 75% setup custom service ports priority, no netmask ip priority yet seems to run well, I followed a dd-wrt tutorial on low memory routers and used some tips. I failed to mention that wifi is running very well on radios. Sorry for such a late feedback on this revision as I just installed this version without checking the current build I'll have to catch up after the next build comes out to run it on my Linksys E3200, thank you
Router Model: Netgear R7000
Firmware Version: DD-WRT v3.0-r34929 (02/12/1
Kernel Version: Linux 4.4.115 #2593 SMP Sat Feb 10 09:57:20 CET 2018 armv7l
Previous: 30880
Mode: Router
Reset: No
Issues/Errors: openvpn (using NordVPN) not working unless syslogd enabled. I tried proto udp4 and mtu-disc yes in additional config but did not solve no activity to client status. I'm still learning and probably didn't enter correctly. It is odd that enabling syslogd fixes the issue. _________________ ASUS RT-AX88U
- OEM firmware
Netgear R7000 (secondary VPN router)
- DD-WRT v3.0-r47596 std (10/25/21)
- NordVPN
Posted: Sun Mar 11, 2018 3:12 Post subject: Re: 34939M
awm34x wrote:
OpenVPN wouldn't work until mtu-disc yes & proto udp4 were added to VPN Additional Config
Could you please show me a screenshot of exactly what you have (Sorry I am noob and I am really trying to learn) ... I am having this issue. I get my vpn to work if I toggle the WAN connection type from DHCP to Static and then back to DHCP and then apply the settings. This is quite annoying as every time that I restart I have do this to get my VPN to connect. Please and Thank you.