Enabled PPOE, username is (macadress of experia box) xx-xx-xx-xx-xx-xx@direct-adsl with password KPN.
Enabled MAC cloning on WAN to reflect Experia MAC
enabled VLAN tagging and created eth0.6 and added it also to the bridge bro0 and also assign WAN to eth0.6.
Still no WAN IP.
Anyone else gone crazy over it but still was able to solve it?
Joined: 18 Aug 2009 Posts: 597 Location: Antigua/Seattle
Posted: Thu Feb 15, 2018 16:59 Post subject:
To get PPPOE wan IP all you need is PPPOE user name and password nothing else so until you get that IP within your router, those other things don't matter. _________________ WRT3200ACM
Joined: 18 Aug 2009 Posts: 597 Location: Antigua/Seattle
Posted: Fri Feb 16, 2018 18:49 Post subject:
I don't see how that could possibly work.
As far as I know your WAN needs to be PPPOE! and then the window will open for you to enter your user and pass. _________________ WRT3200ACM
Joined: 18 Aug 2009 Posts: 597 Location: Antigua/Seattle
Posted: Sat Feb 17, 2018 18:23 Post subject:
I also doubt your user name should have @provider in it it seems like you need to figure out why your IP isn't accepting your user name or password because until you fix that all else is pointless, like changing a tire on a car with no engine or steering wheel.
You say "I also have that configured" as if it's a secondary thing.
It's the ONLY thing at this moment, until you get that thing to talk with your IP all else is pointless and borders on insanity. _________________ WRT3200ACM
i understand that, and of course i added the PPOE user/password. But the KPN Glasvezel (fibre) needs VLAN6 to be made active apparently and i guess i did that wrong.