The upgrade went well, but after the upgraded, I lost connectivity on my pc and mobile.
Ok
I'm using a Huawei e303 modem to connect to 3g network.
It was working well before the upgrade.
But no internet connectivity now.
I can browse the ddwrt web interface.
I can ping any site from Administration > Commands.
But can't ping any site from pc or mobile.
Did hard rest after the flash.
If shows a WAN IP 10.82.186.227 which is normal I think.
What could be the cause and how can I fix it?
Any help is appreciated.
Thanks.
P.S. It seems I've posted in wrong section.
Please move it to correct section.
Last edited by badhon_raj on Wed Feb 21, 2018 12:55; edited 1 time in total
I suspect there are problems with both BS and Kong's most recent builds. I also lost connectivity with Kong 34030 and had to revert to an older build. My advice would be to roll-back. _________________ Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339
Some build from 2015. Starting with 25xxxx
I reverted back 25760, everything is fine now.
Latest working build for mobile broadband was 28846 or one or two before that one. _________________ R6400v2 (boardID:30) - Kong 36480 running since 03/09/18 - (AP - DNSMasq - AdBlocking - QoS) R7800 - BS 31924 running since 05/26/17 - (AP - OpenVPN Client - DNSMasq - AdBlocking - QoS) R7000 - BS 30771 running since 12/16/16 - (AP - NAS - FTP - SMB - OpenVPN Server - Transmission - DDNS - DNSMasq - AdBlocking - QoS) R6250 - BS 29193 running since 03/20/16 - (AP - NAS - FTP - SMB - DNSMasq - AdBlocking)
Joined: 06 Feb 2018 Posts: 48 Location: Vienna, Austria
Posted: Thu Feb 22, 2018 10:51 Post subject:
3g works with 33772 on my TL-WR1043 Rev 1.8.
Tried upgrading to 34311 but had to revert since 3g was faulty. I'm using a Medion Mobile S4222 (MediaTek OEM) 3g-modem.
Didn't try later versions because I've become tired of repeating the a little bit cumbersome update procedure at the cli every one or two weeks since upgrading via gui is broken in all versions after 33345.
Joined: 10 Oct 2014 Posts: 101 Location: 60th parallel N.
Posted: Fri Mar 09, 2018 12:51 Post subject:
I have also been going through hoops with these later builds, I am using 4G broadband connection.
Been switching between two units, one Atheros, one Broadcom.
My reason for trying these later builds was due to "krack" vulnerability patch, but
I have encountered connection lock-up issues when the unit is heavily loaded, had to power cycle units.
Some of the r25xxx and r28xxx build seemed more stable.
For the time being using a ZTE MF286 unit instead of dd-wrt. _________________ EA6900 v3.0-r52217 std ░ WZR-HP-AG300H-DD-WRT v3.0-r52095 std ░ WHR3-G54 v3.0-r29193 mini ░ WLI-TX4-G54HP ░ WBMR-HP-GNV2 ░ TL-MR3420v²
Upgraded to 33772.
MBB is working fine on my 1043ND v2
droid-I wrote:
I have also been going through hoops with these later builds, I am using 4G broadband connection.
Been switching between two units, one Atheros, one Broadcom.
My reason for trying these later builds was due to "krack" vulnerability patch, but
I have encountered connection lock-up issues when the unit is heavily loaded, had to power cycle units.
Some of the r25xxx and r28xxx build seemed more stable.
For the time being using a ZTE MF286 unit instead of dd-wrt.
May I ask which 4G modem you are using? I need to get one too.
The upgrade went well, but after the upgraded, I lost connectivity on my pc and mobile.
Ok
I'm using a Huawei e303 modem to connect to 3g network.
It was working well before the upgrade.
But no internet connectivity now.
I can browse the ddwrt web interface.
I can ping any site from Administration > Commands.
But can't ping any site from pc or mobile.
Did hard rest after the flash.
If shows a WAN IP 10.82.186.227 which is normal I think.
What could be the cause and how can I fix it?
Any help is appreciated.
Thanks.
P.S. It seems I've posted in wrong section.
Please move it to correct section.
First You did a good job and sorry you use an old modem of Huawei. Internet technology has been changing for its use of fiber optic and other advanced technology. It is a USB based modem to use in a rural area. Simple use of it's setting as adopter tab, properties, and 3g Mode. Then restart your pc. _________________ linksys customer service
May I ask which 4G modem you are using? I need to get one too.
my personal setup consists of a DWM-222A1 (currently stuck on r36154) as live modem, a Huawei E372 (still 3G - not working with current releases) as test stick and Sierra EM7455 as target (not working yet).
Mobile Broadband and DD-WRT are a difficult and fragile combination.
I'm thinking about replacing hardware and switching to Openwrt. You need to keep the family happy _________________ ZTE MC801A - 5G bridge mode
R7000 - router, AP 2.4Ghz / 5Ghz