Joined: 21 Jul 2006 Posts: 1898 Location: Fortaleza Ce Brazil
Posted: Wed Feb 14, 2018 22:08 Post subject:
All LEDs are working ..
Netgear R7800
Firmware Version
DD-WRT v3.0-r34900M kongat (02/14/1
Kernel Version
Linux 3.18.94 #273 SMP PREEMPT Wed Feb 14 11:44:07 CET 2018 armv7l
CPU Model
QCA IPQ806X
CPU Cores
2
CPU Features
VFP VFPv4 NEON EDSP
CPU Clock
800 MHz / 800 MHz
Load Average
2%
0.03, 0.08, 0.03
CPU Temperature
CPU 53.0 °C / ath0 54 °C / ath1 54 °C
_________________ DDwrt ...it rocks ....
1 R7800 54420 AP Wireguard webserver JFFS SAMBA FTP usb HD Mesh
1 R7800 54420 Cli Mesh
1 WZR1750 54389 AP Webserver Samba Wireguard
1 TP link Archer C7v5 54420 Cli Mesh
1 DD x86_64 48296 Gateway Samba Ftp Webserver
Posted: Thu Feb 15, 2018 8:42 Post subject: Good build
Router: Netgear R7500v2
WAN Speed: 40Mb/s
Updated via ddup from KONG's r34800M
Reset:No
So far everything is working, no noticeable hiccups or issues. Cosmetic change: CPU temperature is now showing correct. QOS is working well as before (default method). USB printing is also working (since KONG's r34780M)
Router Name: ea8500
Router Model: Linksys EA8500
Version: DD-WRT v3.0-r34900M kongat (02/14/18)
Kernel Version: Linux 3.18.94 #274 SMP PREEMPT Wed Feb 14 22:40:44 CET 2018 armv7l
Uptime: 10:10
Temperature: CPU 62.0 °C / ath0 63 °C / ath1 63 °C
Previous: v3.0-r33986 std (12/04/17)
Status: AP / Static DHCP x 12
Reset: GUI before and after Flash
Errors: nvram restore requred reboot edits / QoS, Client bridges working well
Update: My 5ghz wifi has been dropping a few times since updated to this latest build. Flashed via telnet with crc check and erase nvram so I know it's not a bad flash/config.
Update: My 5ghz wifi has been dropping a few times since updated to this latest build. Flashed via telnet with crc check and erase nvram so I know it's not a bad flash/config.
I confirm WiFi dropping that didn't happen with 38000M. I've also noticed that one of my older PC with Intel 5300N sometimes is not auto connected after power on.
However, I've also noticed that in this build all of my devices are connected on the highest speed (e.g. 877/433 etc). In previous builds my Lenovo X1 Carbon (Intel 7226) frequently dropped to lower connection speeds in the same location.
Since WiFi issues only happened 2 times and reboots seems to fix the issue I've decided to stick to this release for a while.
Moreover, it looks like Kong moved it to the stable release folder
http://www.desipro.de/ddwrt/K3-AC-IPQ806X/
Which now contains:
DD-WRT v3.0-r34900M kongat (02/14/18 )
Joined: 17 Jan 2018 Posts: 64 Location: Georgia, USA
Posted: Tue Feb 20, 2018 0:49 Post subject:
Currently running on backup router – Archer C7 – no DD-WRT
Problem with guest network = VAP
Router – r7800
Upgraded to r35030M 2/16/18 and then downgraded to r34900M 2/14/18.
On both builds I set up ath0.1 on wireless/basic settings tab. Saved and Applied Settings.
However ath0.1 does not show up on Setup/Networking page.
Cannot add Multiple DHCP Server for ath0.1 as it is not an option.
Considering reverting back to r34320M kongat (01/02/18) where I had ath0.1 set up with no problems. _________________ R7800 r53339 std (08/01/23)
Private network on bridge br0 = eth1 (vlan 1) + wlan0 + wlan1.
Guest network on bridge br1 = eth1.4 (vlan 4) + VAPs (wlan0.1 + wlan1.1) for IOT devices
(Roku's, Amazon Echos, smart switches, etc.) and guest.
Noob still finding my way.
swconfig dev switch0 set enable_vlan 1
swconfig dev switch0 vlan 1 set ports "1 2 6"
swconfig dev switch0 vlan 4 set ports "3 4 6t"
swconfig dev switch0 set apply
vconfig add eth1 4
brctl addif br1 eth1.4
ifconfig eth1.4 up
has just been released. Please post results
