SAMBA - Mounted but not visible

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> ARM or PPC based Hardware
Author Message
rootatshell
DD-WRT Novice


Joined: 16 Oct 2015
Posts: 7

PostPosted: Thu Apr 05, 2018 22:38    Post subject: SAMBA - Mounted but not visible Reply with quote
I have previously set up a USB NAS w/ automatic drive mount, etc. and had it working. I ended up switching some of the drives around and suddenly, I am seeing the drive in the control panel but it isn't mounting. In Disk Info under USB, I see:

--- /dev/sda1
Block device, size 1.819 TiB (2000396746752 bytes)
Windows BOOTMGR boot loader
NTFS file system
UUID EEFA979FFA97629F
Volume size 1.819 TiB (2000396746240 bytes, 3907024895 sectors)
/dev/sda1 mounted to /tmp/mnt/sda1

for the previously working drive, and:
--- /dev/sda1
Block device, size 7.277 TiB (8001563187200 bytes)
Windows NTLDR boot loader
NTFS file system
UUID 01D3D1057A80F630
Volume size 7.277 TiB (8001563186688 bytes, 15628053099 sectors)
/dev/sda1 mounted to /tmp/mnt/sda1

for the drive not working from the start.

But under NAS, when I attempt to set up a share with SAMBA enabled, I only see /mnt and no mnt/sda1 like I had seen previously. In any case, I mount /mnt and can see /sda/, /sda1/ in the /mnt/ directory. It does not appear that auto-mount is working anymore for me..

I have attempted to reset the router and am having the same issue, with both my drives - the one that worked previously and the new one.

The version I am running is:
Firmware: DD-WRT v24-sp2 (04/09/15) std
This is the latest for my router that's currently available.
CPU Model: ARMv7 Processor rev 0 (v7l)

Running fdisk -l shows the following:
Disk /dev/mtdblock0: 2 MB, 2097152 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/mtdblock0 doesn't contain a valid partition table
Disk /dev/mtdblock1: 0 MB, 65536 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/mtdblock1 doesn't contain a valid partition table
Disk /dev/mtdblock2: 0 MB, 65536 bytes
255 heads, 63 sectors/track, 0 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/mtdblock2 doesn't contain a valid partition table
Disk /dev/mtdblock3: 33 MB, 33554432 bytes
255 heads, 63 sectors/track, 4 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/mtdblock3 doesn't contain a valid partition table
Disk /dev/mtdblock4: 32 MB, 32046592 bytes
255 heads, 63 sectors/track, 3 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/mtdblock4 doesn't contain a valid partition table
Disk /dev/mtdblock5: 100 MB, 100663296 bytes
255 heads, 63 sectors/track, 12 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/mtdblock5 doesn't contain a valid partition table
fdisk: device has more than 2^32 sectors, can't use all of them
Disk /dev/sda: 2199.0 GB, 2199023255040 bytes
255 heads, 63 sectors/track, 267349 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 267350 2147483647+ ee EFI GPT

I'm guessing the GPT instead of MBR is the problem, but I thought SAMBA supported GPT?

I attempted to switch over to the EXT3 file system but that generated its own set of problems where I was getting permission errors when attempting to put files on/off the drive through the network (even with the workgroup and users defined..)

Let me know,

Thanks!


Last edited by rootatshell on Wed Apr 11, 2018 4:48; edited 2 times in total
Sponsor
rootatshell
DD-WRT Novice


Joined: 16 Oct 2015
Posts: 7

PostPosted: Wed Apr 11, 2018 4:33    Post subject: Reply with quote
Bump!
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> ARM or PPC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum