Night Prowler DD-WRT Novice
Joined: 15 Jan 2016 Posts: 49
|
Posted: Wed Apr 11, 2018 12:49 Post subject: Opening port and directing it to a specifig IP? |
|
I have an R7000 router and for the life of me I'm not able to setup when I access the site with <WAN>:3389 to get it to go to <LAN>:3389
In my firewall I have the below and it does open port 4000 with no problems. However when I add another instance of that same routine it doesn't work. I do apply, save and reboot the router.
iptables -I FORWARD -i tun1 -p udp -d 192.168.1.3 --dport 4000 -j ACCEPT
iptables -I FORWARD -i tun1 -p tcp -d 192.168.1.3 --dport 4000 -j ACCEPT
iptables -t nat -I PREROUTING -i tun1 -p tcp --dport 4000 -j DNAT --to-destination 192.168.1.3
iptables -t nat -I PREROUTING -i tun1 -p udp --dport 4000 -j DNAT --to-destination 192.168.1.3
On the LAN I can access the Desktop remotely on port 3389 from another PC, so the firewall on that PC is not blocking.
I'm using a open port checker and it shows the port closed on 3389, and it does show port 4000 open. _________________ Michael Steele |
|