I really dont expect much, but im having a few problems with it:
1-Wifi dying and not accepting new connection atleast twice a day, so i have to turn off/on the device
2-Every device that connects to the router are listed under the DHCP table with the same name as my computer and wrong interfaces
I dont know if it is worth installing DDWRT since i will not use alot of its options, but if get a those two points fixed and a better connection i think its worth it, but i dont know. What do you recommend?
Also, the wiki mentions something about LAN ports not working after reset sometimes, but i cant follow the fix for it because i cant find the bridge options in my router.
1-Wifi dying and not accepting new connection atleast twice a day, so i have to turn off/on the device
2-Every device that connects to the router are listed under the DHCP table with the same name as my computer and wrong interfaces
I dont know if it is worth installing DDWRT since i will not use alot of its options, but if get a those two points fixed and a better connection i think its worth it, but i dont know. What do you recommend?
Also, the wiki mentions something about LAN ports not working after reset sometimes, but i cant follow the fix for it because i cant find the bridge options in my router.
The issues you listed are on OEM or DD f/w? What exactly is your current setup? And this is a v2? _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
1-Wifi dying and not accepting new connection atleast twice a day, so i have to turn off/on the device
2-Every device that connects to the router are listed under the DHCP table with the same name as my computer and wrong interfaces
I dont know if it is worth installing DDWRT since i will not use alot of its options, but if get a those two points fixed and a better connection i think its worth it, but i dont know. What do you recommend?
Also, the wiki mentions something about LAN ports not working after reset sometimes, but i cant follow the fix for it because i cant find the bridge options in my router.
The issues you listed are on OEM or DD f/w? What exactly is your current setup? And this is a v2?
OEM and is a V2 i posted my issue on the Linksys forum with no answer, im posting screens of my config and the problem. You will see in the screen alot of "Netbook" names, but those are mobile phones.
OEM and is a V2 i posted my issue on the Linksys forum with no answer, im posting screens of my config and the problem. You will see in the screen alot of "Netbook" names, but those are mobile phones.
So OEM f/w is over 3yrs old I see. I would absolutely follow the v2 wiki and put a k3x build on it. Upgrade to k3x 30006, reset, manually set up, and try it for a while. What might you use it for? Latest few builds have wireless issues but you could try 35531 or 34311. Read the new build threads for E1200 reports. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
FWIW. I have a e1200v2. Its currently running pretty solid with an older BS build 30949 k3 mega. Definitely not a powerhouse, but is at least N and can load mega on it. The DDWRT build will give you much more insight into what the firmware is doing over OEM.
