Posted: Mon Apr 30, 2018 22:57 Post subject: Policy based routing stable build
Hello,
I have recently flashed a WRT3200ACM to r35681
Everything is great accept PBR for VPN does not work. As noted in the build thread.
My question is what build should I use that PBR works as expected and stable.
35452
35531
35667
Or another one?
I’ve been using 35531 on my wrt1900acsv1 since it’s release, running vpn server and client (with PBR). Before you try it, make sure in your current build SFE is disabled and router IP is not in PBR.
Cheers!
I’ve been using 35531 on my wrt1900acsv1 since it’s release, running vpn server and client (with PBR). Before you try it, make sure in your current build SFE is disabled and router IP is not in PBR.
Cheers!
Thank you for your response.
I had previously check both of those things. (Lots of thread searching before posting a question.)
What ever is outside of PBR connects fine and off the VPN. What ever is on the PBR does not resolve anything. If I take all PBR out then everything connects fine over the VPN.
I’ve been using 35531 on my wrt1900acsv1 since it’s release, running vpn server and client (with PBR). Before you try it, make sure in your current build SFE is disabled and router IP is not in PBR.
Cheers!
Thank you for your response.
I had previously check both of those things. (Lots of thread searching before posting a question.)
What ever is outside of PBR connects fine and off the VPN. What ever is on the PBR does not resolve anything. If I take all PBR out then everything connects fine over the VPN.
I will give 35531 a try tonight.
Before I rolled back, I figured I would reset to defaults and reconfigure since I was going to be down any way.
That worked. I am still on 35681 and now have OpenVPN with PBR working as expected.
Thank you to those that offered advise.
Moral of the story: reset and reconfigure just to make sure.