Posted: Fri May 18, 2018 18:23 Post subject: R6400v2 with Kong fw
I currently have this router loaded with version 3.0-r34800M of Kong's firmware and it's working... mostly. I want to reload the stock Netgear firmware but it's not letting me. I've tried using the admin interface with different versions of the NG fw and lays says successful but comes back to wrt. I've done the 30-30-30 reset numerous times. I'also tried using TFTP2 as well as the Win10 http client to PUT the fw with no success.
I would like to wipe it completely bare and then try the tftp but can't figure that out. Can anyone help?
Wasn't aware the v2 was supported. It's not listed. Stop doing 30/30/30, you'll probably have to rever using serial. _________________ I am far from a guru, I'm barely a novice.
Joined: 19 Jan 2018 Posts: 17 Location: Netherlands
Posted: Sat May 26, 2018 18:15 Post subject:
wub901 wrote:
It,s not supported as far as I am aware
Correct : not supported YET.
Some guys put some bucks together and send a R6400V2 to Kong.
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=312828&highlight= _________________ OS: ArchLinux
Shuttle XH61V Quad-Core Intel Core i5-3470t CPU @ 3.20GHz
Routers:NetGear R6400-V2 (boardid U12H332T20_NETGEAR), ExperiaBox_V10
Switches: HP ProCurve 1810G-8, Linksys SLM2024
