Congrats on the upgrade!! Another amazing build since 35900M. The webui is lightning fast. Now if SFE can work with PBE and QoS download it'll be perfect
May 19 09:02:48 R7800 daemon.err httpd[3419]: Request Error Code 401: Authorization required. please note that the default username is "root" in all newer releases.
Both previous were from wired WIN 10 and Linux systems.
I'm baffled and wish I knew what else to try and tweak...
I attempted moving the WAN to the other core to help try and alleviate the possible CPU bottleneck, that didn't work at all in helping QOS.
Is there any way to check if QOS is being applied to the LAN ports, to me it seems like download QOS is totally being ignored.
Both previous were from wired WIN 10 and Linux systems.
I'm baffled and wish I knew what else to try and tweak...
I attempted moving the WAN to the other core to help try and alleviate the possible CPU bottleneck, that didn't work at all in helping QOS.
Is there any way to check if Not sureQOS is being applied to the LAN ports, to me it seems like download QOS is totally being ignored.
Not sure what your problem might be. You can always lower the QOS (maybe half) DL & UL to see what happens. If that is working then increase till it breaks.
Could be many things.......when I fisrt run speedtest on this tablet it showed 82 mbps upload....dont know what was going then....likey ISP stuff beyound my control.
Both previous were from wired WIN 10 and Linux systems.
I'm baffled and wish I knew what else to try and tweak...
I attempted moving the WAN to the other core to help try and alleviate the possible CPU bottleneck, that didn't work at all in helping QOS.
Is there any way to check if QOS is being applied to the LAN ports, to me it seems like download QOS is totally being ignored.
Back up your settings, reset to defaults/nvram and configure only QoS and retest your wired. I suspect a bad config somewhere or old nvram.
Router Model: Linksys EA8500
Firmware: DD-WRT v3.0-r35965M kongat (05/17/18)
Kernel: Linux 3.18.109 #316 SMP PREEMPT Thu May 17 14:37:35 CEST 2018 armv7l
Status: AP / Local DNS / QoS HFSC - FQ-CODEL/ Static DHCP x 12
Temperatures: CPU 64.0 °C / ath0 55 °C / ath1 59 °C
Previous: DD-WRT v3.0-r35900M kongat (05/08/18)
Reset: GUI before and after Flash
Errors: Power switch to reset after firmware upload - otherwise all seems well.
@msoengineer
- your issues sound almost exactly like I was having with my wzr-1750dhp. Thought it was a bcm vs ath problem, but maybe not. Just reconfigured the wzr from scratch and it seemed to help.
Joined: 13 Aug 2013 Posts: 6870 Location: Romerike, Norway
Posted: Wed May 23, 2018 7:44 Post subject:
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r35965M kongat (05/18/1
Kernel Version Linux 3.18.109 #317 SMP PREEMPT Fri May 18 23:18:31 CEST 2018