Posted: Tue Mar 19, 2024 15:06 Post subject: New Build - 03/19/2024 - r55416
Welcome to Marvell r55416 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp) 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Debug Analyze: stracetcpdump.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Linksys WRT1900ACS v2
File: ddwrt-linksys-wrt1900acsv2-webflash.bin
Firmware: DD-WRT v3.0-r55416 std (03/19/24)
Kernel: Linux 6.1.82 #347 SMP Tue Mar 19 04:38:32 +07 2024 armv7l
Mode: Gateway, SFE disabled, QoS in use, Wifi disabled, Wireguard for external access, WAN to DSL Modem, samba to access USB3-ext4 SSD, Keep Alive reboot 5:00 in the morning, using my own local NTP
Reset: No
Status: Installed two days ago, when I try to copy anything from my Windows Machine using SMB to its connected SSD, the router restarts shortly after.
I tried to debug this, having "cat /var/log/messages" in a loop.
This did not show anything strange.
I can create "empty files", just create a new text document and the router does behave. Those files are available and do survive a reboot.
The very second I edited a newly created file and tried to save its content, the output of above mentioned loop froze, Internet connection went down and the device rebooted.
Not possible to connect SMB via Kubuntu / Ubuntu or Coreelec. I use SCP or NFS to access the files for now.
Windows works, android x-plore file Manager often mentions "wrong parameter" and refuses to work until I retry to access the share a few times. Amaze files explorer still does not work (stopped working when ksmbd was introduced).
Quote:
Block device, size 55.90 GiB (60022480896 bytes)
DOS/MBR partition map
Partition 1: 55.90 GiB (60020490240 bytes, 117227520 sectors from 2048)
Type 0x83 (Linux)
Ext4 file system
Router/Version: Linksys WRT1200AC v1
File: ddwrt-linksys-wrt1200ac-webflash.bin
Firmware: DD-WRT v3.0-r55416 std (03/19/24)
Kernel: Linux 6.1.82 #116 SMP Mon Mar 18 01:32:27 +07 2024 armv7l
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to R7800, Keep Alive reboot 6:05 in the morning, using my own local NTP
Reset: No
Status: Installed two days, OK.
Works, but when I try to set 5G, all wifi becomes unstable.
Does someone have working settings?
Here is what I get in Status:
wlan0:
ChipsetMWL88W8964 802.11ac
Radio StatusActive
Radio ModeAP
NetworkMixed
SSIDdd-wrt 5G
Channel60 + 58 (5300 MHz VHT80)
Busy Time2320 ms
Active Time690590 ms
Channel Quality100%
TX Power24 dBm
RateAuto
ACK TimingN/A
Encryption - Interface wlan0Enabled, WPA2-PSK
Connected Clients0
wlan1:
ChipsetMWL88W8964 802.11ac
Radio StatusActive
Radio ModeAP
NetworkMixed
SSIDdd-wrt 2.4G
Channel11 + 7 (2462 MHz VHT40)
Busy Time10780 ms
Active Time622506 ms
Channel Quality99%
TX Power30 dBm
RateAuto
ACK TimingN/A
Encryption - Interface wlan1Enabled, WPA2-PSK
Connected Clients0
-- This network comes and goes in my scanner (Wifi Analyser on android)
wlan 2:
ChipsetMWLSD8887 802.11ac
Radio StatusActive
Radio ModeAP
NetworkMixed
SSIDdd-wrt
Channel100 (5500 MHz HT20)
Busy Time0 ms
Active Time0 ms
TX Power15 dBm
Rate86.7 Mbit/s
ACK TimingN/A
Encryption - Interface wlan2Enabled, WPA2-PSK
Connected Clients1
On my scanner, both wlan0 and 2 appears in the 5G: first is at channel 60, the other at 100. wlan 1 appears on channel 11.
I use WPA2 Personal. ccom and tkip blanks. I tried wpa3, but it looks like something is wrong with it. My portable PC under linux and my android 11 phones could not use it.