MichelG DD-WRT Guru
Joined: 12 Feb 2007 Posts: 903 Location: Galati - RO / Kishinev - MD / Geneva - CH / Tarragona - E
|
Posted: Fri Sep 25, 2009 14:53 Post subject: R12966 on Senao 2610 - test & issues |
|
Hi, I have installed it, and tested as AP, and Client/Repeater.
Wiviz : still not working on Client + VAP (reapeter). It hangs
Site survey : hangs / the router reboots sometimes
PING from PC to VAP: it jumps from 1ms to 450ms. It was not the case with the previous version
PING from PC to AP: Same issue.
Tested with encryption / without encryption. No changes on this behaviour.
Tested PING from COMMAND when in Client / Repeater, to the AP. 2ms, very stable. No problem.
Issue seems related to AP clients (PC). Using atheros chip also on the PC.
If anyone can proceed with these tests and confirm ?
For the rest, seems to be stable, GUI loads fast, and no yet seen a problem with performance.
Thanks, Michel.
EDIT: just processed a test, using a PC with a wifi Broadcomm chip, and a PING. All replies are 1ms.
Interesting. _________________ 2x EOC-2160 - AP 2x14dB Yagy to 450m link
2x EOC-2160 - RP 2x17dB Panels - 2x 7Mbps
1x WRT54G v2.2 - V24-SP2 13577VPN Eko
All Senao EOC-2610 V1.10 Std 15362 BS
1x UBNT Bullet 2 - RP 18dB Panel - 11Mbps - 13Km link
|
|