Posted: Sun Nov 29, 2009 2:03 Post subject: EOC-2610 is Bricked
My senao eoc-2610 is bricked. I tried to flash back to original firmware. The result is dead AP. Only Power led is green. So I can’t connect to it by LAN. Any ideas how fix this?
i can't restore it using the ap51-flash or redboot-fix, because no had lan conection.
Joined: 09 Aug 2006 Posts: 121 Location: Germany, Bensheim
Posted: Wed Dec 02, 2009 8:16 Post subject:
Quote:
I follow th step to back to original firmware and when i type the last commmnad "reset" it no responding any more.
Please let me know how you tried to revert the stock firmware. Which files did you take, where did you get them and above all which instructions did you used to flash the firmware?
Quote:
The result is dead AP. Only Power led is green. So I can’t connect to it by LAN. Any ideas how fix this? Crying or Very sad
i can't restore it using the ap51-flash or redboot-fix, because no had lan conection
I saw this a few times before now but unfortunately it seems its not the firmware which causes this problem.
Joined: 09 Aug 2006 Posts: 121 Location: Germany, Bensheim
Posted: Thu Dec 03, 2009 9:31 Post subject:
I found some instructions how to revert the stock firmware for 1650/2610 on the net:
http://"removed cause of bricking units"/index.php?/Diverse/restoring-original-firmware-to-eoc-1650eoc-2610.html
Posted: Thu Dec 03, 2009 12:15 Post subject: SENAO EOC-2610
Markus wrote:
I found some instructions how to revert the stock firmware for 1650/2610 on the net:
http://"removed cause of bricking units"/index.php?/Diverse/restoring-original-firmware-to-eoc-1650eoc-2610.html
But attation my test device (EOC-2610 S/N 091265xx) ends in the same way as CiberPanares, so do not use these instructions.
Yes Markus, i use these instructions on "removed cause of bricking units".