~~~~~Restore original MAC address~~~~~~

Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices
View previous topic :: View next topic  
Author Message
AlexGe
DD-WRT Novice


Joined: 25 Nov 2009
Posts: 3
PostPosted: Sun Dec 27, 2009 20:16    Post subject: ~~~~~Restore original MAC address~~~~~~ Reply with quote
I flashed my Engenius devices (Eoc-2610 an ECB3500) with holeflashe.bin . Now both devices have the same MAC address. I found where it is stored MAC in wholeflashe.bin but I don’t want to remove flash chip from the board to reflash it with correct MAC address.
Is there any solution to change the device MAC address trough TELNET or Redboot?
Thank you
Back to top View user's profile Send private message
Sponsor
Mordak
DD-WRT Guru


Joined: 27 Dec 2007
Posts: 933
Location: Lee, Me
PostPosted: Sun Dec 27, 2009 21:00    Post subject: Reply with quote
You need to download the CFE.bin and hexedit the correct MAC addresses in and save it then upload it back to the router and use the mtd command to write it to the cfe of the router. You can also do this via jtag if that model has one available.
_________________

ASUS AC3200
Linksys WRT32X
Linksys WRT3200 ACM
Back to top View user's profile Send private message
AlexGe
DD-WRT Novice


Joined: 25 Nov 2009
Posts: 3
PostPosted: Mon Dec 28, 2009 8:58    Post subject: Reply with quote
I don`t know why but my Atheros CPU doesn`t enter in DEBUG MODE. I try with buffered JTAG and 5 resistor jtag but no success. This is the main reason why I removed the flash chip from the board; reflashed it and soldered back.
It is possible to save whole flash with RedBoot or to write wholeflash on device? I have wholeflash.bin with correct MAC address.
Back to top View user's profile Send private message
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany
PostPosted: Mon Dec 28, 2009 11:06    Post subject: Reply with quote
Mordak wrote:
You need to download the CFE.bin and hexedit the correct MAC addresses in and save it then upload it back to the router and use the mtd command to write it to the cfe of the router. You can also do this via jtag if that model has one available.


for sure this is wrong! cause this are atheros units which run REDBOOT!
u have to edit redboot conf
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Back to top View user's profile Send private message
AlexGe
DD-WRT Novice


Joined: 25 Nov 2009
Posts: 3
PostPosted: Mon Dec 28, 2009 11:40    Post subject: Reply with quote
Thank you
How to backup on PC redboot conf?
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum