Posted: Thu Jan 21, 2010 4:24 Post subject: Change Firmware on EOC-2610 (error)
RedBoot> ip_address -l 192.168.1.1 -h 192.168.1.11
IP: 192.168.1.1/255.255.255.0, Gateway: 0.0.0.0
Default server: 192.168.1.11
RedBoot> fis init
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
... Erase from 0xa87e0000-0xa87f0000: .
... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .
RedBoot> load -r -b 0x80041000 DD-WRT_newimage.bin
Using default protocol (TFTP)
Raw file loaded 0x80041000-0x80830fff, assumed entry at 0x80041000
RedBoot> fis create linux
Can't locate 7f0000(8323072) bytes free in FLASH
RedBoot> fconfig
Run script at boot: true
Boot script:
.. <Not a string: 0x80FE303D>
Enter script, terminate with empty line
>>
RedBoot> ip_address -l 192.168.1.1 -h 192.168.1.11
IP: 192.168.1.1/255.255.255.0, Gateway: 0.0.0.0
Default server: 192.168.1.11
RedBoot> fis init -f
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
... Erase from 0xa8030000-0xa87e0000: .......................................... ................................................................................ .
... Erase from 0xa87e0000-0xa87f0000: .
... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .
RedBoot> load -r -b 0x80041000 linux.bin
Using default protocol (TFTP)
Raw file loaded 0x80041000-0x80760fff, assumed entry at 0x80041000
RedBoot> fis create linux
... Erase from 0xa8030000-0xa8750000: .......................................... ........................................................................
... Program from 0x80041000-0x80761000 at 0xa8030000: .......................... ................................................................................ ........
... Erase from 0xa87e0000-0xa87f0000: .
... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .
RedBoot> fconfig
Run script at boot: true
Boot script:
.. <Not a string: 0x80FE303D>
Enter script, terminate with empty line
>>
RedBoot> fconfig
Run script at boot: true
Boot script:
.. <Not a string: 0x80FE303D>
Enter script, terminate with empty line
>>
sorry but i still dont get what u r trying to tell me
enter the boot script
sash let me tell you , i did everything that you said so my problem is that the ap don´t save the setting in the last stage of the upgrade with the code fis init -f that does´nt work , so what you suggest?