esr-1221 possible to run dd-wrt micro? V1.1.0

Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices
Author Message
Rolla
DD-WRT Novice


Joined: 11 Mar 2010
Posts: 7

PostPosted: Fri Mar 12, 2010 0:04    Post subject: esr-1221 possible to run dd-wrt micro? V1.1.0 Reply with quote
I just purchased this router for the 'universal wireless repeater' mode and it doesn't work at all. Hoping to find a firmware that actually can deliver what was promised on the box.

2MB Flash, 8MB Ram, RTL8186
Ethernet: RTL8305SC
ISSI IC42S16400F-7TL RAM
Macronix 29LV160DBTI-70G ROM
RTL8225 Wireless
Stamp on PCB NSR-1221-1.10 LFP
FCC ID (fake) U2M-SR32108001

Code:

0day 00:00:13 klogd started: BusyBox v1.00-pre8 (2005.09.16-02:17+0000)
0day 00:00:13 Linux version 2.4.18-MIPS-01.00 (root@localhost.localdomain) (gcc version 3.3.3) #39 ¤@ 1¤ë 5 13:21:55 CST 20090day 00:00:13 early printk enabled
0day 00:00:13 Determined physical RAM map:
0day 00:00:13  memory: 00800000 @ 00000000 (usable)
0day 00:00:13 On node 0 totalpages: 2048
0day 00:00:13 zone(0): 2048 pages.
0day 00:00:13 zone(1): 0 pages.
0day 00:00:13 zone(2): 0 pages.
0day 00:00:13 Kernel command line: root=/dev/mtdblock1 console=0 single
0day 00:00:13 Calibrating delay loop... 179.40 BogoMIPS
0day 00:00:13 Memory: 6324k/8192k available (1448k kernel code, 1868k reserved, 92k data, 52k init, 0k highmem)
0day 00:00:13 Dentry-cache hash table entries: 1024 (order: 1, 8192 bytes)
0day 00:00:13 Inode-cache hash table entries: 512 (order: 0, 4096 bytes)
0day 00:00:13 Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
0day 00:00:13 Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
0day 00:00:13 Page-cache hash table entries: 2048 (order: 1, 8192 bytes)
0day 00:00:13 check_wait... unavailable.
0day 00:00:13 POSIX conformance testing by UNIFIX
0day 00:00:13 Linux NET4.0 for Linux 2.4
0day 00:00:13 Based upon Swansea University Computer Society NET3.039
0day 00:00:13 Initializing RT netlink socket
0day 00:00:13 Starting kswapd
0day 00:00:13 Serial driver version 6.02 (2003-03-12) with no serial options enabled
0day 00:00:13 ttyS00 at 0x00c3 (irq = 3) is a rtl_uart1
0day 00:00:13 state->flags=00000000
0day 00:00:13 Realtek GPIO Driver for Flash Reload Default
0day 00:00:13 block: 64 slots per queue, batch=16
0day 00:00:13 PPP generic driver version 2.4.1
0day 00:00:13 PPP MPPE Compression module registered
0day 00:00:13 RealTek E-Flash System Driver. (C) 2002 RealTek Corp.
0day 00:00:13 Found 1 x 2M Byte MXIC MX29LV160AB at 0xbe000000
0day 00:00:13 Creating 2 MTD partitions on "DiskOnChip Millennium":
0day 00:00:13 0x00000000-0x00100000 : "boot+cfg+linux"
0day 00:00:13 0x00100000-0x00200000 : "root fs"
0day 00:00:13 RTL8185 driver version 1.14 (2007-04-03)
0day 00:00:13 8186NIC Ethernet driver v0.0.8 (Jan 30, 2007)
0day 00:00:13 eth0: RTL8186-NIC at 0xbd200000, 00:01:02:03:04:05, IRQ 4
0day 00:00:13 eth1: RTL8186-NIC at 0xbd300000, 04:05:06:07:08:09, IRQ 5
0day 00:00:13 Realtek FastPath v1.04
0day 00:00:13 NET4: Linux TCP/IP 1.0 for NET4.0
0day 00:00:13 IP Protocols: ICMP, UDP, TCP
0day 00:00:13 IP: routing cache hash table of 512 buckets, 4Kbytes
0day 00:00:13 TCP: Hash tables configured (established 512 bind 1024)
0day 00:00:14 ip_conntrack version 2.1 (64 buckets, 512 max) - 312 bytes per conntrack
0day 00:00:14 PPTP netfilter connection tracking: registered
0day 00:00:14 PPTP netfilter NAT helper: registered
0day 00:00:14 ip_tables: (C) 2000-2002 Netfilter core team
0day 00:00:14 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
0day 00:00:14 NET4: Ethernet Bridge 008 for NET4.0
0day 00:00:14 VFS: Mounted root (squashfs filesystem) readonly.
0day 00:00:14 Freeing unused kernel memory: 52k freed
0day 00:00:14 mount /proc file system ok!
0day 00:00:14 mount /var  file system ok!
0day 00:00:14 device eth0 entered promiscuous mode
0day 00:00:14 eth0:phy is 8305
0day 00:00:14 device wlan0 entered promiscuous mode
0day 00:00:14 device wlan0-vxd entered promiscuous mode
0day 00:00:14 br0: port 3(wlan0-vxd) entering listening state
0day 00:00:14 br0: port 2(wlan0) entering listening state
0day 00:00:14 br0: port 3(wlan0-vxd) entering learning state
0day 00:00:14 br0: port 3(wlan0-vxd) entering forwarding state
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Fri Mar 12, 2010 19:44    Post subject: Reply with quote
NO
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum