Chillispot

Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices
Author Message
txrxspeed
DD-WRT Novice


Joined: 16 Nov 2009
Posts: 9

PostPosted: Wed Jan 06, 2010 12:55    Post subject: Chillispot Reply with quote
appreciate if someone could guide me,
i have 2 units of EOC-2610, flashed with DD WRT v24 preSP2 (Build13064). both act as a AP with wds added, When users connected to my AP-1 the chillispot will auto assign an IP address in a range of "192.168.182.0/24". but when users connected to AP-2 it just directly go the the bing search page. It just bypass the chillispot.

my setup is like this:-

192.168.1.1 <--- Loadbalancer connected to my ADSL Lines
192.168.1.100 <--- AP-1 with WDS set to mac address of AP-2 using LAN as setting.
192.168.1.102 <--- AP-2 with WDS (act as to extend the range) set to mac address of AP-1 using LAN as setting.
Both units actually have the same setting on the chillispot, is there anything i miss or overlooked, any help is appreciated.

Tx
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Wed Jan 06, 2010 17:13    Post subject: Reply with quote
first wiki:wds

2nd read:

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
txrxspeed
DD-WRT Novice


Joined: 16 Nov 2009
Posts: 9

PostPosted: Fri Jan 08, 2010 0:11    Post subject: Reply with quote
Above problem solve, both units have to have gateway ip assign instead of default 0.0.0.0

Cheers

Tx
txrxspeed
DD-WRT Novice


Joined: 16 Nov 2009
Posts: 9

PostPosted: Sun Apr 04, 2010 8:19    Post subject: WDS Reply with quote
i wonder if some guru can guide me on this, initially i was running chillispot without problems, now i switch to a commercial
hotspot software. i again use the WDS as before but only this time users connecting to it have problem browing the net.

192.168.1.1 ---> my router connected to the internet

192.168.1.5 ---> hotspot pc running two network cards.
192.168.137.1

192.168.137.2 ---> DHCP server

192.168.137.5 ---> 2610 as AP1
255.255.255.0
192.168.137.1
WDS setting with LAN and Mac of AP2
On Advance Setting i use [ROUTER]
DHCP Forwarder on 192.168.137.2
LAN connect to Switch

192.168.137.6 ---> 2610 as AP2
255.255.255.0
192.168.1.5
WDS setting with LAN and MAC of AP1
on Advance Setting i use [GATEWAY]
DHCP Forwarder on 192.168.137.2
LAN is not connected just the POE cable is connected

When users connected to AP2 it won't browse the net.
i have try with P2P WDS but the problem is even worst, they can see each other but when i connect a LAN cable to it, it cannot browse
the net but it can access both AP's.

The P2P WDS setting i use

10.0.0.1 on AP1
255.255.255.252

10.0.0.2 on AP2
255.255.255.252

rest of the setting same as above.

Can someone point to me the right direction on how i can extend my wifi connections ?


Regards
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum