I haven't successfully mounted it in Windows, but I'll share what I did to install it on my router.
Quote:
ipkg-opt install portmap
ipkg-opt install unfs3
Now create an exports file that sets up your shared directory. I created it as /opt/etc/exports. Here's an example that setups up /mnt to be accessible by any one on the 192.168.1.x subnet.
Quote:
/mnt 192.168.1.0/255.255.255.0(rw,no_root_squash)
You'll need to go into your /opt/etc/init.d/ directory and start the portmap service (S55*).
Before you start unfs3 edit the unfsd service (S56*), change the command line option for unfsd to point to your exports file. Normally it looks for /etc/exports.
Quote:
unfsd -e /opt/etc/exports
Now start the unfsd daemon (S56*).
On your client computer you should be able to see the exports by issuing a showmount command.
Quote:
showmount -e 192.168.1.1
This much I've gotten to work. However when I try mounting it with Windows 7 x64 I always get an Error 53 (network path not found), despite the fact that it had no problem seeing the export with showmount. It's able to communicate with the portmap daemon which is telling it about the exports, but not the unfsd daemon. I would imagine it's on the standard 2049 port. Perhaps I need to open these up on the router? Perhaps I need to change the mountd port?
Posted: Thu Jun 10, 2010 11:47 Post subject: NFS usage
I was finally able to use UNFS3, but not the one from nslu, but from kamikaze distribution of openwrt. Please let me know if interested and I'll write all the steps.
I'm using a RT-N16 router and I'm pleased with UNFS performance.
Posted: Fri Jun 18, 2010 4:21 Post subject: Re: NFS usage
idaniel wrote:
I was finally able to use UNFS3, but not the one from nslu, but from kamikaze distribution of openwrt. Please let me know if interested and I'll write all the steps.
I'm using a RT-N16 router and I'm pleased with UNFS performance.
Daniel
Hi Daniel
What transfer speeds are you getting from the RT-N16 (up/down) with UNFS? (I've got Kong's DD-WRT build running Samba3 and getting 5 MB/s read & 6 MB/s write).
DV
Posted: Thu Jun 24, 2010 10:05 Post subject: Re: NFS usage
DiamondView wrote:
idaniel wrote:
I was finally able to use UNFS3, but not the one from nslu, but from kamikaze distribution of openwrt. Please let me know if interested and I'll write all the steps.
I'm using a RT-N16 router and I'm pleased with UNFS performance.
Daniel
Hi Daniel
What transfer speeds are you getting from the RT-N16 (up/down) with UNFS? (I've got Kong's DD-WRT build running Samba3 and getting 5 MB/s read & 6 MB/s write).
DV
I don't have numbers yet, I may have them soon, if I'll be able to see the NFS share from Windows XP. Using Samba I'm getting almost the same numbers as you, maybe a little bit higher.
When I said that I'm pleased with performance I was comparing Asus RT-N16 NFS transfer speed with Netgear WGT634U NFS transfer speed.
When using WGT634U NFS share in order to play a 8 GB full HD movie using a WDTV player, there were moments when image was choking. However, using RT-N16 NFS share, is working like a charm.
Posted: Fri Jun 25, 2010 3:20 Post subject: Re: NFS usage
idaniel wrote:
DiamondView wrote:
idaniel wrote:
I was finally able to use UNFS3, but not the one from nslu, but from kamikaze distribution of openwrt. Please let me know if interested and I'll write all the steps.
I'm using a RT-N16 router and I'm pleased with UNFS performance.
Daniel
Hi Daniel
What transfer speeds are you getting from the RT-N16 (up/down) with UNFS? (I've got Kong's DD-WRT build running Samba3 and getting 5 MB/s read & 6 MB/s write).
DV
I don't have numbers yet, I may have them soon, if I'll be able to see the NFS share from Windows XP. Using Samba I'm getting almost the same numbers as you, maybe a little bit higher.
When I said that I'm pleased with performance I was comparing Asus RT-N16 NFS transfer speed with Netgear WGT634U NFS transfer speed.
When using WGT634U NFS share in order to play a 8 GB full HD movie using a WDTV player, there were moments when image was choking. However, using RT-N16 NFS share, is working like a charm.
OK post your results once its setup as I'm curious to see if UNFS is more efficient than Samba.
I'd guess you'd need at least 6 MB/s read for smooth Bluray playback.
DV