Author
Message
bsdguy DD-WRT Novice Joined: 12 Jul 2010 Posts: 16
Back to top
Sponsor
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Back to top
bsdguy DD-WRT Novice Joined: 12 Jul 2010 Posts: 16
Posted: Wed Jul 28, 2010 17:56 Post subject:
are you sure with that?
I don´t want to invest another ~100€ and smash that thing again... ;)
Can you give me the URLs for the exact processto do please, would help a lot.
Thanks for all
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Posted: Wed Jul 28, 2010 19:26 Post subject:
im not 100% sure but flashing redboot should be save and does no harm at all if done the right way.
1st read the micro redboot page of the wiki
u yould do a redboot backup first for sure
btw gimme the of the orig redboot _________________Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Back to top
muellmaen DD-WRT Novice Joined: 19 Aug 2010 Posts: 5
Posted: Thu Aug 19, 2010 14:25 Post subject:
Ok, I am not bsdguy but I would like also to test dd-wrt on a all0258...
Code:
fis list
Name FLASH addr Mem addr Length Entry point
RedBoot 0xBE000000 0xBE000000 0x00030000 0x00000000
rootfs 0xBE030000 0xBE030000 0x003F0000 0x00000000
vmlinux.bin.l7 0xBE420000 0x80002000 0x000A0000 0x8016C040
cfg 0xBE4C0000 0xBE4C0000 0x00010000 0x00000000
custom 0xBE4D0000 0xBE4D0000 0x00080000 0x00000000
FIS directory 0xBE7E0000 0xBE7E0000 0x0000F000 0x00000000
RedBoot config 0xBE7EF000 0xBE7EF000 0x00001000 0x00000000
so far..
I also did read the micro redboot page of the wiki. But I could not figure out which of the redboot files is the right one to use.
and one more question: if I do not like dd-rt how do I revert to the original firmware ?
thanks ...
Back to top
Sash DD-WRT Guru Joined: 20 Sep 2006 Posts: 17619 Location: Hesse/Germany
Posted: Fri Aug 20, 2010 11:40 Post subject:
from my point of view there is NO need to install microredboot!
there should be enough space to flash ddwrt.
just follow the eoc instruction. but in front clear redboot with
anything that will be left after this should be
Code: Name FLASH addr Mem addr Length Entry point
RedBoot 0xBE000000 0xBE000000 0x00030000 0x00000000
FIS directory 0xBE7E0000 0xBE7E0000 0x0000F000 0x00000000
RedBoot config 0xBE7EF000 0xBE7EF000 0x00001000 0x00000000
now there should be enough space _________________Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Back to top