where to find the correcr redboot image for EOC-5610

Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices
Author Message
bsdguy
DD-WRT Novice


Joined: 12 Jul 2010
Posts: 16

PostPosted: Thu Sep 02, 2010 15:59    Post subject: where to find the correcr redboot image for EOC-5610 Reply with quote
Hey,
I got another EOC-5610 like hw here now - again...

That time I want to do everything correct as these devices are not cheap ;)

So, as it´s branded by the reseller simple tftp-flashing wont work, so I need to flash micro redboot first.

I read http://www.dd-wrt.com/wiki/index.php/Micro_Redboot
and http://www.dd-wrt.com/wiki/index.php/Tftp_flash

...but Ißm not sure about which micro-redboot-image to use.

Anybody can post a link to the image please?
Are there any other things I need to keep an eye on?

Here is a bit info about my device:
Code:

RedBoot> fis list
Name              FLASH addr  Mem addr    Length      Entry point
RedBoot           0xBE000000  0xBE000000  0x00030000  0x00000000
rootfs            0xBE030000  0xBE030000  0x003F0000  0x00000000
vmlinux.bin.l7    0xBE420000  0x80002000  0x000A0000  0x8016C040
cfg               0xBE4C0000  0xBE4C0000  0x00010000  0x00000000
custom            0xBE4D0000  0xBE4D0000  0x00080000  0x00000000
FIS directory     0xBE7E0000  0xBE7E0000  0x0000F000  0x00000000
RedBoot config    0xBE7EF000  0xBE7EF000  0x00001000  0x00000000

^^do I need to flash redboot in the end? or just remove some stuff here( if so, how do I do that? )
[/code]
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Fri Sep 03, 2010 9:35    Post subject: Reply with quote
why should tftp not work?

gimme

Code:
fconfig

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
bsdguy
DD-WRT Novice


Joined: 12 Jul 2010
Posts: 16

PostPosted: Fri Sep 03, 2010 22:43    Post subject: Reply with quote
If you could just remember...you´ve been the one who told me to flasg micro redconfig...
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=75446&highlight=

The last try was a gameover after that what you advice me here now:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=76336&highlight=
You can read that here: http://www.dd-wrt.com/phpBB2/viewtopic.php?t=75454&highlight=

I´ll post the fconfig output 2mor when I´m back in my office where the device is.

I really don´t want to brick another device, so I ask again in good mood, if you could please help me going through this. I really need to install that device 2mor afternoon, but I´m scared about wasting another ~100€.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17619
Location: Hesse/Germany

PostPosted: Sat Sep 04, 2010 1:31    Post subject: Reply with quote
then u should reread:
http://www.dd-wrt.com/phpBB2/viewtopic.php?t=76336
!!!!

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
bsdguy
DD-WRT Novice


Joined: 12 Jul 2010
Posts: 16

PostPosted: Tue Sep 07, 2010 13:46    Post subject: Reply with quote
Sorry, have been ill and not in the office...
and by the way....would been usefil to know that I should run it with -l

RedBoot> fconfig -l
Run script at boot: true
Boot script:
.. fis load -l vmlinux.bin.l7
.. exec -c "root=/dev/mtdblock2 mem=32M"

Boot script timeout (1000ms resolution): 2
Use BOOTP for network configuration: false
Gateway IP address: 0.0.0.0
Local IP address: 192.168.1.1
Local IP address mask: 255.255.255.0
Default server IP address: 0.0.0.0
Console baud rate: 9600
GDB connection port: 9000
Force console for special debug messages: false
Network debug at boot time: false
bsdguy
DD-WRT Novice


Joined: 12 Jul 2010
Posts: 16

PostPosted: Mon Sep 20, 2010 9:51    Post subject: Reply with quote
ping, any news on my last post?
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum