ESR-9752 HW V1.0.0 Issue Flashing

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Senao Devices
Author Message
jarodriguez
DD-WRT Novice


Joined: 12 Jun 2011
Posts: 1

PostPosted: Sun Jun 12, 2011 13:11    Post subject: ESR-9752 HW V1.0.0 Issue Flashing Reply with quote
I am having an issue loading firmwara for this device.

I am pasting here sequence of events in case someone has any ideas

Thanks in advance.

Session Log:


1: System Load Linux to SDRAM via TFTP.
Please Input new ones /or Ctrl-C to discard
Input device IP (192.168.0.1) ==:

Input server IP (192.168.0.100) ==:

Input Linux Kernel filename (firmware.bin) ==:

Using Eth0 device
TFTP from server 192.168.0.100; our IP address is 192.168.0.1
Filename 'firmware.bin'.
Loading: checksum bad
checksum bad
checksum bad
Got ARP REQUEST, return our IP
checksum bad
checksum bad

ArpTimeoutCheck
Got ARP REPLY, set server/gtwy eth addr (00:24:e8:bc:e9:6a)
Got it
checksum bad
checksum bad
checksum bad
checksum bad
T #
first block received
################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
################################################################
done
Bytes transferred = 3654574 (37c3ae hex)

LINUX started...

THIS IS ASIC
Linux version 2.6.23.17 (root@dd-wrt) (gcc version 4.1.2) #2629 Fri Apr 23 10:12:33 CEST 2010

The CPU frequency set to 384 MHz
32M RAM Detected!
CPU revision is: 0001964c
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Built 1 zonelists in Zone order. Total pages: 8128
Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4 rootfstype=squashfs noinitrd
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
cause = 9080005c, status = 1100ff00
PID hash table entries: 128 (order: 7, 512 bytes)
calculating r4koff... 003a9800(3840000)
CPU frequency 384.00 MHz
Using 192.000 MHz high precision timer.
console [ttyS1] enabled
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29480k/32768k available (2164k kernel code, 3288k reserved, 316k data, 120k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
Generic PHY: Registered new driver
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
Load RT2880 Timer Module(Wdg/Soft)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
io scheduler noop registered
io scheduler deadline registered (default)
Ralink gpio driver initialized
Serial: 8250/16550 driver $Revision: 1.3 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A
serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A
rt3052 access driver initialization.
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ralink flash device: 0x1000000 at 0xbf000000
Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
Ralink SoC physically mapped flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 6 MTD partitions on "Ralink SoC physically mapped flash":
0x00000000-0x00030000 : "uboot"
0x00030000-0x00040000 : "uboot-config"
0x00040000-0x00050000 : "factory-defaults"
0x00050000-0x00120000 : "linux"
0x00120000-0x00400000 : "rootfs"
0x003f0000-0x00400000 : "nvram"
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
IPP2P v0.8.2 loading
ClusterIP Version 0.8 loaded successfully
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Welcome to PF_RING 3.2.1
(C) 2004-06 L.Deri <deri@ntop.org>
NET: Registered protocol family 27
PF_RING: bucket length 128 bytes
PF_RING: ring slots 4096
PF_RING: sample rate 1 [1=no sampling]
PF_RING: capture TX No [RX only]
PF_RING: transparent mode Yes
PF_RING initialized correctly.
PF_RING: registered /proc/net/pf_ring/
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
GDMA1_MAC_ADRH -- : 0x00000000
GDMA1_MAC_ADRL -- : 0x00000000
Ralink APSoC Ethernet Driver Initilization. v2.00 256 rx/tx descriptors allocated, mtu = 1500!
NAPI enable, weight = 0, Tx Ring = 256, Rx Ring = 256
GDMA1_MAC_ADRH -- : 0x0000000c
GDMA1_MAC_ADRL -- : 0x43305277
PROC INIT OK!
decode /dev/mtdblock4
List of all partitions:
1f00 192 mtdblock0 (driver?)
1f01 64 mtdblock1 (driver?)
1f02 64 mtdblock2 (driver?)
1f03 832 mtdblock3 (driver?)
1f04 2944 mtdblock4 (driver?)
1f05 64 mtdblock5 (driver?)
No filesystem could mount root, tried: squashfs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,4)
Rebooting in 1 seconds..


U-boot Ver:1.0.1.1 2009/09/25


Board: Ralink APSoC DRAM: 32 MB 1*32 MB
============================================
ASIC 3052_MP2 (Port5<->None)
Product Name: ESR-9752
SDRAM CAS = 3(d1835272)
============================================

Please choose the operation:
1: Load system code to SDRAM via TFTP.

LINUX started...
init started: BusyBox v1.7.5 (2010-06-08 19:51:54 CST)
starting pid 131, tty '/dev/console': '/sbin/config_init'
Config Init version: 1.1.3.220 date: 2010/06/08
starting pid 186, tty '/dev/ttyS1': '/sbin/config_term'
************************************************************************
* ESR-9752 *
************************************************************************

KernelApp/Ramdisk Ver:1.1.3.220 Date:2010/06/08
console> cat: can't open '/apps/lib/modules/2.6.21/modulesApp.dep': No such file or directory
ln: /sbin/./apps_init: File exists
route: SIOCADDRT: File exists
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17636
Location: Hesse/Germany

PostPosted: Thu Jun 16, 2011 7:38    Post subject: Reply with quote
wrong build?!

http://www.dd-wrt.com/wiki/index.php/WHR-G300N

read:

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7621

PostPosted: Thu Jun 16, 2011 16:33    Post subject: Reply with quote
Use option 2 in the boot menu, Load Linux to flash via tftp.
_________________
Kernel panic: Aiee, killing interrupt handler!
jennyblunt
DD-WRT Novice


Joined: 07 Jul 2011
Posts: 2

PostPosted: Tue Jul 12, 2011 9:37    Post subject: Reply with quote
Hi, sorry to be dumb but is the only to flash this thing by pulling it apart and attaching serial cable to board?
Ric03
DD-WRT User


Joined: 11 Apr 2011
Posts: 72

PostPosted: Wed Jul 13, 2011 17:16    Post subject: Reply with quote
yes
skeatz
DD-WRT Novice


Joined: 07 Mar 2014
Posts: 2

PostPosted: Wed Mar 19, 2014 2:05    Post subject: Engenius esr-9752 Bad Checksum Reply with quote
Tried to flash dd-wrt to my Engenius esr-9752 last night via tftp. Got a bad checksum message & kernel panic when using Vista/putty/tftpd32, unit reverted to stock firmware.

Tried again with XP/hyperterm/tftpd32, no bad checksum message, but unit still reported kernel panic & reverted to stock firmware.

I'm using the Senao-ESR9752SC firmware.bin image.

Anyone managed to successfully flash this router to dd-wrt? How did you do it & which image did you use? Thanks.
skeatz
DD-WRT Novice


Joined: 07 Mar 2014
Posts: 2

PostPosted: Wed Mar 19, 2014 7:22    Post subject: Engenius esr-9752 flash not working Reply with quote
Update to my last post: bad checksum report not consistent. Managed to flash without errors, but router still reports kernel panic. I've attached output below.


Ralink gpio driver initialized
system type: RT3052
boot type: 0
ralink flash device: 0x1000000 at 0xbf000000
Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank. M
anufacturer ID 0x0000c2 Chip ID 0x0022a7
Amd/Fujitsu Extended Query Table at 0x0040
Amd/Fujitsu Extended Query version 1.1.
Ralink SoC physically mapped flash: Swapping erase regions for top-boot CFI tabl
e.
number of CFI chips: 1
Creating 6 MTD partitions on "Ralink SoC physically mapped flash":
0x000000000000-0x000000030000 : "uboot"
0x000000030000-0x000000040000 : "uboot-config"
0x000000040000-0x000000050000 : "factory-defaults"
0x000000050000-0x000000120000 : "linux"
0x000000120000-0x000000400000 : "rootfs"
0x0000003f0000-0x000000400000 : "nvram"
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
Ralink APSoC Hardware Watchdog Timer
u32 classifier
Performance counters on
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (465 buckets, 1860 max)
ctnetlink v0.93: registering with nfnetlink.
IPv4 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
IPP2P v0.8.2 loading
ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
TCP bic registered
TCP cubic registered
TCP westwood registered
TCP highspeed registered
TCP hybla registered
TCP htcp registered
TCP vegas registered
TCP scalable registered
NET: Registered protocol family 17
Bridge firewalling registered
8021q: 802.1Q VLAN Support v1.8
searching for nvram
nvram size = 0
Broken NVRAM found, recovering it (Magic 31985)
MAC_ADRH -- : 0x0000000c
MAC_ADRL -- : 0x43305277
MAC_ADRH -- : 0x0000000c
MAC_ADRL -- : 0x43305277
Ralink APSoC Ethernet Driver Initilization. v2.0 256 rx/tx descriptors allocate
d, mtu = 1500!
NAPI enable, Tx Ring = 256, Rx Ring = 256
MAC_ADRH -- : 0x0000000c
MAC_ADRL -- : 0x43305277
rt3052 access driver initialization.
List of all partitions:
1f00 192 mtdblock0 (driver?)
1f01 64 mtdblock1 (driver?)
1f02 64 mtdblock2 (driver?)
1f03 832 mtdblock3 (driver?)
1f04 2944 mtdblock4 (driver?)
1f05 64 mtdblock5 (driver?)
No filesystem could mount root, tried: squashfs
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,4)
Rebooting in 1 seconds..


U-boot Ver:1.0.1.1 2009/09/25


Board: Ralink APSoC DRAM: 32 MB 1*32 MB
============================================
ASIC 3052_MP2 (Port5<->None)
Product Name: ESR-9752
SDRAM CAS = 3(d1835272)
============================================

Please choose the operation:
1: Load system code to SDRAM via TFTP.

LINUX started...
init started: BusyBox v1.7.5 (2010-06-08 19:51:54 CST)
starting pid 131, tty '/dev/console': '/sbin/config_init'
Config Init version: 1.1.3.220 date: 2010/06/08
starting pid 186, tty '/dev/ttyS1': '/sbin/config_term'
************************************************************************
* ESR-9752 *
************************************************************************

KernelApp/Ramdisk Ver:1.1.3.220 Date:2010/06/08
console> cat: can't open '/apps/lib/modules/2.6.21/modulesApp.dep': No such file
or directory
ln: /sbin/./apps_init: File exists
route: SIOCADDRT: File exists
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum