Posted: Thu Nov 22, 2012 17:26 Post subject: strange mount on WZR-HP-AG300H r19519
Hello all,
I tried to mount an USB dongle on the Buffalo WZR-HP-AG300H with firmware V24-sp2 r19519.
The Web GUI and the telnet/SSH information are contradictious:
On WEB GUI the disk info gives :
Code:
--- /dev/sda
Block device, size 1.880 GiB (2019033088 bytes)
DOS/MBR partition map
Partition 1: 1.465 GiB (1572864000 bytes, 3072000 sectors from 2048)
Type 0x83 (Linux)
Ext3 file system
Volume name "Optware"
UUID 8DEBE602-E06C-40C5-B36A-2AC35B191921 (DCE, v4)
Volume size 1.465 GiB (1572864000 bytes, 384000 blocks of 4 KiB)
Partition 2: 424 MiB (444596224 bytes, 868352 sectors from 3074048)
Type 0x82 (Linux swap / Solaris)
Linux swap, version 2, subversion 1, 4 KiB pages, little-endian
Swap size 424.0 MiB (444588032 bytes, 108542 pages of 4 KiB)
Status: Mounted on /mnt
and the mount command by telnet connection :
Code:
root@S27F00E0:~# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
ramfs on /tmp type ramfs (rw,relatime)
none on /dev type tmpfs (rw,relatime,size=512k)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
devpts on /proc/bus/usb type usbfs (rw,relatime)
/dev/sda1 on /tmp/mnt/sda_part1 type ext2 (rw,relatime,errors=continue,user_xattr)
What can we trust? I'm stucked to try to install optware with this. Which revision is the most reliable for this unit?
root@DD-WRT root # mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro,relatime)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
ramfs on /tmp type ramfs (rw,relatime)
none on /dev type tmpfs (rw,relatime,size=512K)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
devpts on /proc/bus/usb type usbfs (rw,relatime)
/dev/sda1 on /tmp/mnt/sda_part1 type ext3 (rw,relatime,errors=continue,user_xattr,barrier=1,data=writeback)
/dev/sda1 on /etc type ext3 (rw,relatime,errors=continue,user_xattr,barrier=1,data=writeback)
/dev/sda1 on /tmp/root type ext3 (rw,relatime,errors=continue,user_xattr,barrier=1,data=writeback)
/dev/sda1 on /opt type ext3 (rw,relatime,errors=continue,user_xattr,barrier=1,data=writeback)
root@DD-WRT root #
i guess is fine because it is working _________________ Buffalo WZR-HP-AG300H | TPLINK ARCHER-C7 v2
Last edited by fingerslip on Mon Nov 26, 2012 0:22; edited 1 time in total
