ASUS RT-N10 hw ver D1

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2
Author Message
IveulFrog
DD-WRT Novice


Joined: 26 Jul 2013
Posts: 7

PostPosted: Fri Jul 26, 2013 13:41    Post subject: Reply with quote
Hello everybody
As a new dd-wrt user, I bought a brand new ASUS RT-N10 because the router database says it is supported. The revision is H/W D1.
I downloaded the firmware listed in the database (dd-wrt.v24-21061_NEWD-2_K2.6_mini_RT-N10.trx), the device is now bricked (most of the leds are on, with low light, and nothing happens if a eth cable is plugged). Of course I tried the 30/30/30 thing, it didn't work.
I managed to get a new router (same model, and probably same revision: I'll now tomorrow when I'll get it).
I have read a few topics here, and it looks like I'm not the only one facing this problem.
1/ It appears to me that the router DB should be updated, at least in order to warn people before they buy or brick (I may be wrong, it's only a suggestion)
2/ The provious message in this thread links to a dd-wrt build that is supposed to work more or less, but it is not clear if it for RT-N10 rev. HW D1, or for the RT-N10+ rev D1. Can someone clarify this ?
Any other advice will be welcome !
Regards and thanks for the good work
Sponsor
maxilogic
DD-WRT Novice


Joined: 30 Jun 2013
Posts: 3

PostPosted: Fri Jul 26, 2013 15:12    Post subject: Reply with quote
Again, I have to emphasized that this is not my personal experience. I read this from a Chinese forum in Taiwan. Another guy tried a newer verson and claimed that the old problems are still there (PPPOE not working, Port 4 and WAN port interchanged)

http://www.dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2013/05-27-2013-r21676/broadcom_K26/dd-wrt.v24-21676_NEWD-2_K2.6_mini_RT-N10PLUSD1.trx

The screenshot indicated that this is a RT-N10+ Rev D1:

http://attach.mobile01.com/attach/201305/mobile01-61e4d4f1ef00122ccdf9b005b35a4463.jpg

IveulFrog wrote:
Hello everybody
As a new dd-wrt user, I bought a brand new ASUS RT-N10 because the router database says it is supported. The revision is H/W D1.
I downloaded the firmware listed in the database (dd-wrt.v24-21061_NEWD-2_K2.6_mini_RT-N10.trx), the device is now bricked (most of the leds are on, with low light, and nothing happens if a eth cable is plugged). Of course I tried the 30/30/30 thing, it didn't work.
I managed to get a new router (same model, and probably same revision: I'll now tomorrow when I'll get it).
I have read a few topics here, and it looks like I'm not the only one facing this problem.
1/ It appears to me that the router DB should be updated, at least in order to warn people before they buy or brick (I may be wrong, it's only a suggestion)
2/ The provious message in this thread links to a dd-wrt build that is supposed to work more or less, but it is not clear if it for RT-N10 rev. HW D1, or for the RT-N10+ rev D1. Can someone clarify this ?
Any other advice will be welcome !
Regards and thanks for the good work
IveulFrog
DD-WRT Novice


Joined: 26 Jul 2013
Posts: 7

PostPosted: Fri Jul 26, 2013 16:33    Post subject: Reply with quote
Thank you Maxilogic for these informations.
I have been unable to open the screenshot, it complains about the referrer. So to be crystal clear: is this build supposed to work with the RT-N10 D1, or is it only for the RT-N10+ D1 ?
If yes it would fix my issue, as I don't need PPPOE and can deal with the port change (I just need vlan support and WiFi / LAN / WAN routing).
By the way: emphasis understood, I won't blame you if something goes wrong Smile
maxilogic
DD-WRT Novice


Joined: 30 Jun 2013
Posts: 3

PostPosted: Fri Jul 26, 2013 23:30    Post subject: Reply with quote
I am afraid this is only for RT-N10+ D1, the author of the original thread didn't mentioned anything about RT-N10 D1.
IveulFrog
DD-WRT Novice


Joined: 26 Jul 2013
Posts: 7

PostPosted: Sat Jul 27, 2013 14:10    Post subject: Reply with quote
Thanks for the answer.

I received today a new RT-N10 D1 and can confirm that the firmware shown on the database page for this device bricks it. I tried today with TFTP and got a nice (second) brick.
As I said before, it would be good to update the DB page before others brick the devices they bought because they read it was supported...
yxc
DD-WRT Novice


Joined: 04 Nov 2014
Posts: 1

PostPosted: Tue Nov 04, 2014 19:51    Post subject: rt-n10 d1 Reply with quote
I have asus RT-N10 HW D1
BCM 5256COKFBG
EM 639165TS-6G
25L3206E
I Wrong Flash to dd-wrt.v24-21061_NEWD-2_K2.6_mini_RT-N10.trx I stopped installation.
Can it work my asus on dd-wrt.
Can it be used dd-wrt.v24-21061_NEWD-2_K2.6_mini.bin for serial recovery.
I do not have the original bin file. Can rename trx to bin.
Sorry for bad english
adrianio
DD-WRT Novice


Joined: 18 Feb 2009
Posts: 7

PostPosted: Sat Mar 21, 2015 6:20    Post subject: RT-N10 D1 Reply with quote
I bricked two of RT-N10 ver D1. Leds are dimmed at about 10% of light intensity. Cannot connect to them, no way to recovery. Man, please update your database pages. This router is not supported Crying or Very sad !
thekiosk
DD-WRT Novice


Joined: 29 Mar 2012
Posts: 9

PostPosted: Mon Mar 30, 2015 4:17    Post subject: Reply with quote
Is there anyone can explain how to Unbricking RT-N10+ v.D1 to me. I brought new one(RT-N10+ D1) and bricked it already.

I've successful upgraded it to this version >> http://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2015/03-19-2015-r26490/broadcom_K26/dd-wrt.v24-26490_NEWD-2_K2.6_mini_RT-N10PLUSD1.trx

After login to DD-WRT admin page and configure it to be a routers, assign name of router to "Asus RT-N10PLUS D1" then restart it. Power LED flash a few second and it turn off by itself. I've tried to press power button, it doesn't response. All leds still off. Seem it brick at all. T_T

Please help.
thekiosk
DD-WRT Novice


Joined: 29 Mar 2012
Posts: 9

PostPosted: Thu Apr 02, 2015 6:38    Post subject: Reply with quote
To update you all guy, I've completed to install DD-WRT to RT-N10+ D1, follow this step:

Download DD-WRT both version and keep in your disk:
1.
Quote:
http://download1.dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2013/04-15-2013-r21286/broadcom_K26/dd-wrt.v24-21286_NEWD-2_K2.6_mini_RT-N10PLUSD1.trx

2.
Quote:
http://download1.dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2014/12-22-2014-r25697/broadcom_K26/dd-wrt.v24-25697_NEWD-2_K2.6_mini_RT-N10PLUSD1.trx


Prepare:
1. Configure your PC to static IP address as [192.168.1.3]
2. Plugin LAN to you PC and RT-N10+ D1
3. Plugin the power.

First install:
1. Press and Hold "Reset" button
2. Press and Release "Power" button in order to power on RT-N10+ D1
3. Wait for 30 second.
4. Release "Reset" button, at this step power led will flash
5. On you PC open IE and type 192.168.1.1 in URL
6. IE will landing to Asus recovery page, put your dd-wrt.v24-21286_NEWD-2_K2.6_mini_RT-N10PLUSD1.trx that kept in you disk.
7. Click OK button for install DD-WRT to RT-N10+ D1
8. Wait about 3 min.
9. After RT-N10+ D1 upgrade to DD-WRT complete, refresh IE maybe require.
10. IE will landing to define the new admin username and password of DD-WRT....


After complete the first installation I recommended to upgrade to the latest version. I use
Quote:
http://download1.dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2014/12-22-2014-r25697/broadcom_K26/dd-wrt.v24-25697_NEWD-2_K2.6_mini_RT-N10PLUSD1.trx


It look good for me, cheapest router with DD-WRT. About 650 THB/20 USD
Taxu
DD-WRT Novice


Joined: 04 Apr 2015
Posts: 1

PostPosted: Sat Apr 04, 2015 22:54    Post subject: Reply with quote
Thanks, that worked for me. The only difference was that I kept the reset button pressed for 40 sec. and Internet Explorer did not connect to the Asus recovery page so I uploaded the firmware through Firefox. After that I made the update with IExplorer.
lusiads
DD-WRT Novice


Joined: 29 Jan 2015
Posts: 6

PostPosted: Fri May 01, 2015 8:16    Post subject: Reply with quote
thekiosk wrote:
To update you all guy, I've completed to install DD-WRT to RT-N10+ D1, follow this step:

Download DD-WRT both version and keep in your disk:
1.
Quote:
http://download1.dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2013/04-15-2013-r21286/broadcom_K26/dd-wrt.v24-21286_NEWD-2_K2.6_mini_RT-N10PLUSD1.trx

2.
Quote:
http://download1.dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2014/12-22-2014-r25697/broadcom_K26/dd-wrt.v24-25697_NEWD-2_K2.6_mini_RT-N10PLUSD1.trx


Prepare:
1. Configure your PC to static IP address as [192.168.1.3]
2. Plugin LAN to you PC and RT-N10+ D1
3. Plugin the power.

First install:
1. Press and Hold "Reset" button
2. Press and Release "Power" button in order to power on RT-N10+ D1
3. Wait for 30 second.
4. Release "Reset" button, at this step power led will flash
5. On you PC open IE and type 192.168.1.1 in URL
6. IE will landing to Asus recovery page, put your dd-wrt.v24-21286_NEWD-2_K2.6_mini_RT-N10PLUSD1.trx that kept in you disk.
7. Click OK button for install DD-WRT to RT-N10+ D1
8. Wait about 3 min.
9. After RT-N10+ D1 upgrade to DD-WRT complete, refresh IE maybe require.
10. IE will landing to define the new admin username and password of DD-WRT....


After complete the first installation I recommended to upgrade to the latest version. I use
Quote:
http://download1.dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2014/12-22-2014-r25697/broadcom_K26/dd-wrt.v24-25697_NEWD-2_K2.6_mini_RT-N10PLUSD1.trx


It look good for me, cheapest router with DD-WRT. About 650 THB/20 USD


Thanks a bunch. It works well for me .
Once you get the router into firmware recovery mode, you can flash the latest dd-wrt (mine was http://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2015/04-09-2015-r26653/broadcom_K26/dd-wrt.v24-26653_NEWD-2_K2.6_mini_RT-N10PLUSD1.trx ).
The dd-wrt on this router is a little buggy, and there is no noticeable performance improvement, however it's nice to have dd-wrt as always. Very Happy
lusiads
DD-WRT Novice


Joined: 29 Jan 2015
Posts: 6

PostPosted: Sun May 03, 2015 5:38    Post subject: Not worth it Reply with quote
After a few days of trial and error, I find dd-wrt very buggy on this router, even with the latest release.

LAN and WAN ports are interchanged, multiple SSID does not work most of the time, unable to access web interface from wired connection, and unable to reset configuration (some will be reset, such as username and password).

So many weird issues and I have to revert back to Asus firmware.
highlander0681
DD-WRT Novice


Joined: 16 Aug 2011
Posts: 5

PostPosted: Thu Nov 12, 2015 15:51    Post subject: Reply with quote
oh, I'm glad i found this topic just after I bricked the router. Very Happy

I have RT-N10 H/W Ver.: D1 also. And i got the same ... leds turned on at 10-20% and tried several way to unbrick it but no luck.
Is there any chance that i can fix it or can i throw it away already? Smile

Thanks in advance
tdashmike
DD-WRT Novice


Joined: 20 Feb 2009
Posts: 4

PostPosted: Sat Oct 08, 2016 9:16    Post subject: Tried r30731 Reply with quote
Just wanted to let you guys know I tried this version on a RT-N10E and WI-FI AP is working great, haven't really tried anything else.

ftp://ftp.dd-wrt.com/betas/2016/10-06-2016-r30731/broadcom_K26/dd-wrt.v24-30731_NEWD-2_K2.6_mini_RT-N10PLUSD1.trx
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum