Posted: Mon Oct 02, 2017 1:14 Post subject: Re: xfs Unknown symbol exportfs_decode_fh
Xeon2k8 wrote:
reubenbrown13 wrote:
I am trying to mount a xfs formatted drive via USB and I get the error: Unknown symbol exportfs_decode_fh. Is it an issue with the module? Does anyone have one that works? I am using Brainslayer 33375 on a tew-818dru.
Thanks
Not related with this thread. Open a new one.
Oh, my bad. I thought the kernel modules were related to the releases. I will open a new thread after I search again to make sure there is not an existing one.
Posted: Fri Oct 06, 2017 22:56 Post subject: dd-wrt.v24-33413_NEWD-2_K3.x_mega-e3200.bin
hello guys i flashed my router with dd-wrt.v24-33413_NEWD-2_K3.x_mega-e3200.bin and leave on cfe loop alredy recovery with serial cable so this build is bad?
thank you
of coruse this router is a Cisco Linksys E3200 and all build on e3200 hang the routerboard
Posted: Mon Oct 09, 2017 18:27 Post subject: Re: dd-wrt.v24-33413_NEWD-2_K3.x_mega-e3200.bin
alienlovesecrets wrote:
hello guys i flashed my router with dd-wrt.v24-33413_NEWD-2_K3.x_mega-e3200.bin and leave on cfe loop alredy recovery with serial cable so this build is bad?
Yes, as is noted in it's (and the others') New Build thread; I think it might be ok for some ARM models, but not MIPS. Last generally good builds are 33006 and 33215. Always research the New Build threads. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Any plans to fix RT-N66U builds? 33215 doesn't seem to be stable..
I recall some complaints regarding wireless issues in that build. Try 33492; it has some driver fixes and TCP improvements. That said, I run Merlin AsusWRT on my N66U.
Otherwise, be much more specific; e.g. have you checked dmesg? _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Everything after 33215 bricks RT-N66U, unfortunately. There is a bug report for it: http://svn.dd-wrt.com/ticket/5971. I was asking if this going to be fixed any time soon.
I couldn't check dmesg on 33215 because router is just rebooting itself sometimes.
Everything after 33215 bricks RT-N66U, unfortunately.
Ah, gotcha. So both the mega and big N66U builds for 33492 fail? There's no report in the build thread. The ticket could also be updated to report it. _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Ah, gotcha. So both the mega and big N66U builds for 33492 fail? There's no report in the build thread. The ticket could also be updated to report it.
I didn't test the latest 33492 myself, but I also don't see anything related in trac timeline, so hardly the issue has just magically gone. Since recovering bricked router takes much time, I don't really want to test the latest build just to confirm it's broken as well. By the way, wasn't alienlovesecrets's message about the same issue?
alienlovesecrets wrote:
hello guys i flashed my router with dd-wrt.v24-33413_NEWD-2_K3.x_mega-e3200.bin and leave on cfe loop alredy recovery with serial cable so this build is bad?
And you said it was known already in the New Build thread. RT-N66U is a MIPS model.
Great news! I flashed my device and it didn't get bricked. I wonder if `mega` would be safe to flash, though, I used that one before. Anyway, thank you very much for this update!
I will do some more testing when I can, but when I installed r33525 on my Asus RT-N16 last night (mega), everything went fine for the install. However, when I enabled clone mac address and rebooted, I lost my connection, wireless and wired. Setting a static IP did not help either.