can someone advise on how-to do a dump of whats needed with putty? The sooner you advise, the sooner I do it. Sorry, a computer n00b here.
Configure putty for logging to a file, maybe also configure to not overwrite old log file when restarting putty.
You will get the whole boot sequence in the log file when restarting the router and you can also log in to the router (if you know buffalo telnet user/pwd, sorry I don't) when it has booted up.
I doubt that the problem is an offset problem.
dusan2 was able to reboot his router without getting a trashed .trx, the problem is likely related to nvram erase/write just before or maybe at the same time as the router reboots.
Do the log anyway, Kong has requested it so he wants to see it. _________________ Kernel panic: Aiee, killing interrupt handler!
I fear I can't do much without a unit here. This might be a dual boot issues, maybe the cfe tries to boot a second system.
If BrainSlayer has a unit he should look at it.
The offsets look ok so far, but might need an adjustment if it is a dual boot device. _________________ KONG PB's: http://www.desipro.de/ddwrt/
KONG Info: http://tips.desipro.de/
what were you ideas for cooling this unit dusan2? buffalo uses a very odd heatsink on the top lid that should probably be ripped off and replaced with some type of Pentium heatsink or such, and a fan added.
I am amazed that buffalo did not send you guys some units to port over.
I'm sure they send it, but directly to BrainSlayer his company (NewMedia Net) has a contract with them. And while I'm a dd-wrt dev I'm not a NewMedia Net employee:-)
Posted: Sun Jan 05, 2014 10:07 Post subject: WZR-1750DH CFE dump firmware from factory installed firmware
I couldn't find any dumped firmware or unencrypted firmware for WZR-1750DH.
Looks like DD-WRT for the device is not stable yet.
I notice that my WiFi connection slows and keeps dropping...
I will need to go back to factory stock firmware via CFE until DD-WRT gets stable.
Can anyone share CFE dumped firmware from factory installed? or know how to load factory stock firmware via CFE ?
Posted: Tue Jan 07, 2014 15:56 Post subject: DHCP server static IP addess error ?
Under testing with latest K3-AC-Arm build.
I can't set set DHCP static IP lease.
Whenever I enter information and click ADD button, it becomes blank slot.
I'm not sure if it really take information I enter.
Can someone look at it? Maybe Kong ?
Posted: Thu Jan 09, 2014 1:02 Post subject: Buffalo WZR-1750DHP for dev's / Kong for working dd-wrt code
hi
as it looks now after ~12000 forum reads we still do not have a working dd-wrt code on Buffalo WZR-1750DHP router
so after i seen kong note i think we ( as users me and you can do something to solve this and get a kong / developers a router if that is what it takes to get working dd-wrt on Buffalo )
****
I fear I can't do much without a unit here. This might be a dual boot issues, maybe the cfe tries to boot a second system.
If BrainSlayer has a unit he should look at it.
The offsets look ok so far, but might need an adjustment if it is a dual boot device.
****
i looked around and seen a WZR-1750DHP for ~ $130 us and ~120eu in Europe. http://www.idealo.de