Posted: Tue Sep 18, 2007 19:17 Post subject: fon + dd-wrt + fon als _wlan-adapter_ am pc
Hallo Forumsleser und Forumsleserinnen!
Nach langer Spielerei ohne Ergebnis, möchte ich euch nun bitten, einen Blick auf meine Config zu werfen - es funktioniert nicht so, wie ich mir das vorstelle.
Meine Vorstellung: fon - Router mit dd-wrt v24beta hängt per Ethernetkabel am PC. Der fon soll mir nun quasi den _Wlan-Adapter_ darstellen ... im Haushalt haben wir ein Funknetzwerk (via DSL -> ASUS 500g prem) mit WPA-Verschlüsselung.
Der PC soll nun via fon-Router an das Netzwerk, respektive ins Internet.
Und mittlerweile weiß ich nicht mehr, was ich wo verstellt habe ... auf jeden Fall läuft nichts mehr.
Also, log ich mich am fon-Router ein, kann funktioniert auch dns ... ein ping auf heise.de ist erfolgreich. Ich kann logischerweise auch den ASUS 500g und den PC pingen. Vom PC allerdings komm ich nicht bis zum ASUS 500g, geschweige denn _ins Netz_
Vielleicht in ganz kurzen Worten meine Einstellungen. fon ist auf Client gestellt und bekommt auch vom ASUS 500g brav eine IP-Adresse. Aber mit der Weiterleitung klappt es irgendwie nicht.
Wie diese dann letztlich aussieht, ist mir relativ egal, ich möchte obige Konfiguration zum Laufen bekommen.
Am Besten wird sein, ich poste meine Einstellungen ... ist etwas umfangreich - hoffe es stösst sich niemand daran - hoffe auch umfangreich genug.
Zuerst die Einstellungen am PC, anschließend die des fon
~ # route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 ath0
192.168.10.0 0.0.0.0 255.255.255.0 U 0 0 0 br0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 br0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 ath0
~ #
~ # brctl show
bridge name bridge id STP enabled interfaces
br0 8000.0018xxyyzzaa yes eth0
br1 8000.000000000000 no
~ #
~ # brctl showstp br0
br0
bridge id 8000.0018xxyyzzaa
designated root 8000.0018xxyyzzaa
root port 0 path cost 0
max age 19.99 bridge max age 25.60
hello time 1.99 bridge hello time 2.56
forward delay 0.00 bridge forward delay 0.00
ageing time 299.98
hello timer 0.59 tcn timer 0.00
topology change timer 0.00 gc timer 0.03
flags
eth0 (1)
port id 8001 state forwarding
designated root 8000.0018xxyyzzaa path cost 19
designated bridge 8000.0018xxyyzzaa message age timer 0.00
designated port 8001 forward delay timer 0.00
designated cost 0 hold timer 0.00
flags
~ # brctl showstp br1
br1
bridge id 8000.000000000000
designated root 8000.000000000000
root port 0 path cost 0
max age 19.99 bridge max age 25.60
hello time 1.99 bridge hello time 2.56
forward delay 19.20 bridge forward delay 14.99
ageing time 299.98
hello timer 0.00 tcn timer 0.00
topology change timer 0.00 gc timer 0.00
flags
KERNEL
======
~ # uname -a
Linux fon1 2.6.20.14 #134 Wed Jul 4 17:12:15 CEST 2007 mips unknown
SYSTEM
========
DD-WRT v24 Beta (07/04/07) std - build 7376M
BusyBox v1.4.2 (2007-07-04 17:15:22 CEST) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
GRAFISCHE OBERFL�CHE
======================
Internet Configuration
TypeConnection TypeAutomatic Configuration - DHCP
Login Status Connection
Uptime1:34:42
IP Address192.168.1.11
Subnet Mask255.255.255.0
Gateway192.168.1.1
DNS 1195.34.133.21
DNS 2192.168.1.1 DNS 3
LAN Status
MAC Address00:18:yy:zz:yy:xx
IP Address192.168.10.1
Subnet Mask255.255.255.0
Gateway0.0.0.0
Local DNS0.0.0.0
Wireless Status
MAC Address00:18:xx:yy:zz:aa
RadioRadio is On
ModeClient
NetworkG-Only
SSIDwhg
Channel1
Xmit16 dBm
Rate48 Mb/s
Encryption - Interface ath0Enabled,
WPA Personal PPTP StatusDisconnected
System Information
Router Namefon1
Router ModelFonera
WAN IP192.168.1.11
LAN IP192.168.10.1